Hello, friends! Nikolay Kostin is in touch, and in this article we will analyze step by step how to update iOS on ipad. iOS is the operating system of Apple devices, it is found on both iPhones and iPads. Updates are released periodically and you are invited to install them. Read on to find out how this is done.
In all fairness, updating or not updating iOS is a question that leaves many questioning whether or not it is worth doing at all. Personally, the decision to update iOS was not immediately given to me. Someone may call me conservative, but I was worried about the fact that after the update, some applications may work crookedly for me or even stop launching altogether. The extreme point was that when viewing new applications in the Appstore, every second had iOS requirements from version 6.0 and higher, and I was sitting with my version 5.1.1 and could not install anything. After that, I realized that it was time to update the system.
In general, I will immediately say that after the update I was satisfied, the ipad began to work much faster, but of course there are jambs, the main one, in my opinion, is the terrible work of the Appstore - it began to load for a mega-long time, it was displayed crookedly, the application was not install, but it was only in the first few days after the iOS update, and then everything began to work more or less for me, and it was easy to work in the Appstore.
Now let's take a step-by-step look at how to update iOS on ipad:
1. Approximately this is how the screen of your ipad looks now:
2. Click the Settings icon, see the following on the screen, go to the Software Update tab (circled in red in the screenshot):
3. Press the button Download and install in the center of the screen. IMPORTANT! IOS update requires at least 3.5 gigabytes of free disk space and also a good internet connection so that update files can download quickly
4. We receive a message that it is better to put the ipad on charge, put it on, click OK.
5. The download process begins, now we are patiently waiting ...
6. We also look forward to checking for updates
7. At the end of checking for updates, your ipad will reboot and the following will appear on the screen:
Move the arrow to unlock the screen
8. We see a message that the update was completed successfully and there are several steps left to complete the installation, press the button Continue
9. We see the offer to configure the geolocation service, select the checkbox to enable or disable it, click the blue Next button - at the top of the screen.
11. Hurray! We receive a message that the ipad is configured and ready to work. Push the button Start using iPad... Congratulations, you can now continue using your iPad as before.
Thank you very much for your attention! I hope this article on how to update iOS on ipad was helpful to you. If you have any questions or wishes, write them in the comments below, we will sort it out together.
So you have become one of the owners of an iPhone, you use your smartphone with great pleasure, and the moment comes when you need to update your iOS. The reasons for which you need to update the system are predictable: new functionality and capabilities, as well as fixing vulnerabilities in the operating system.
The question arises: how to remove the old version of iOS and install a completely new one? In this article, we will teach you how to update your device easily.
You can update iOS iPhone in two ways. Their difference is that in one method you only need the device itself, while in the other you need a computer and iTunes. Before taking any action, it is recommended to make a Backup (backup) of the data and save it on a computer or on a server in iCloud.
If something goes wrong, you can always restore your information in the event of a software failure.
Ios system update via wifi
You can update your iPhone OS anywhere you have Internet access. Make sure the battery is at least 50% charged, otherwise your iPhone will not be able to update iOS and will prompt you to plug in the charger.
- In order to update the system, go to "Settings".
- Through the main menu, go to the "Basic" tab.
- We select the item "Software update".
- We are waiting for your smartphone to make sure the latest updates are available.
- If an OS update is found, click "Download and Install".
- We agree to the license agreement. If you agree with the terms of the license agreement, click "Accept".
After that, wait until your iPhone downloads updates for about 30 minutes. Then your smartphone will reboot and start installing new software. In about 5-10 minutes, your device will reboot and be ready for use.
Warning !!!: Never update your iPhone over the air if you have Jailbreak installed. This can lead to the everlasting apple.
Update via PC using iTunes
How to install iOS using a PC. To do this, you will need to install the latest version of iTunes. You can download it on the official website. If you have an old version of iTunes, you will need to reinstall it.
- We connect the iPhone with a cable to the PC, open iTunes and wait for the program to detect your device.
- Click on the phone icon. The main iPhone control menu opens. Click on the "Update" button
- We agree with the license agreement and wait, the program will do everything by itself.
How to install preloaded firmware
This operation is also referred to by some as a system update, although I would call it a firmware refund or restore. Let's check how this is done using a computer.
First of all, you should naturally have a firmware file on your PC. This is apparently a saved file from the times of previous updates or a file downloaded from one of the sites.
The procedure itself is similar to the previous one, you connect your iPhone to your PC and wait until iTunes detects your smartphone, click on the phone icon. The device control panel opens. Here, instead of the item "Update", select the next next to it "Restore".
Then select the downloaded firmware file and start the firmware process by clicking "Open" accept the license agreement and after about 5-10 minutes the iPhone will reboot and be ready to work. Here is a complete guide on how to flash an iPhone.
Dsi777.ru
How to update iPhone 5s and if you need it
Having an iPhone 5 or 5s, you involuntarily begin to wonder - will there be updates for this model? After all, the device essentially works well, but Apple is discontinuing production of the fifth series of iPhones and what to do in such a situation?
I don't want to part with the phone, but I want to update it, so that the functionality is not inferior to the iPhone 6 and higher. And there are also thoughts about whether the iPhone 5s will work on iOS 10? Will it slow down? Is the fifth iPhone compatible with the tenth version of the system?
We will try to answer these questions in the article below.
Should I update my 5S?
Answer: of course, update, why not? After all, when they released iOS 10, the manufacturer took into account all the same that not everyone is ready to change their iPhone 5s immediately to the more expensive and new iPhone 6. Therefore, Apple practically does not limit the latest technologies to the owners of the fives.
Therefore, a system update can and should be installed on the 5S. This explains the high consumer demand for this model to date. Other iPhone models cannot boast of the ability to constantly update the operating system.
How to update iPhone 5S to iOS 10?
There are two ways to upgrade to the tenth version of the 5s operating system: using iTunes and a USB cable or via WI-FI. Both methods are reliable and convenient. Some people like to speed up downloads via Wi-Fi, but this is easy if the speed and quality of the Internet allows it.
IOS 10 update via WI-FI
To download the update using WI-FI, check the availability of high-speed Internet in the network and charge the iPhone battery at least 60%, since downloading is an energy-intensive process and will take a long time, but the smartphone should not be discharged during this time.
Better yet, connect the device to the charger for this time. This is important, because when installing a new version of iOS, the connection should not be interrupted, otherwise a system error may occur, and the iPhone will turn off.
Before you start downloading the update, make a backup copy of your iPhone data to the iCloud cloud storage or save a copy of all data to your computer for reliability.
Be sure to check the iPhone 5S memory before installing iOS 10. To do this, go to the "Settings" menu and open the "Device memory" section. Also show interest in how much the new system weighs.
If everything is in order and ready to download the software via Wi-Fi, then we will start performing the system update on the iPhone. To do this, open the "Settings" parameter in the smartphone, select the "General" section and then - the "Software update" subsection.
After the iPhone finds the required iOS 10 update and offers it to you, execute the "Download and Install" command and then accept the Agreement by clicking on the "Accept" button. The update will start downloading to your iPhone.
Updating via iTunes
If it is not convenient for you to update the iPhone 5S operating system via Wi-Fi, you can install the operating system using iTunes and a computer. Moreover, install the specified program on your PC or update it to the latest version.
Make sure your computer is connected to the Internet. Put your iPhone on charge. Connect the iPhone 5S and the computer with a USB cable so that the unit is displayed on the PC. Open iTunes and locate your Apple iPhone. Then enter the "Overview" section and execute the "Update" command. The iOS updater will launch and install on your iPhone after a while.
www.pro-vse.site
How to update your iPhone
I welcome everyone to my site, dear readers! Today, many people are actively discussing the latest version of iOS on various forums. So I thought it was time to update to the latest firmware and enjoy the innovations.
I don't know, maybe some of you also want to update your iPhone, it's up to you. And in this material I decided to write detailed instructions on how to update my "apple" gadget using the official iTunes program and via a wireless Wi-Fi network. Choose the appropriate method and go to the instructions. I also tried to answer possible questions in advance: how to make a backup copy of the operating system? What to do if the computer does not see the iPhone? How to transfer contacts from iPhone to iPhone?
Updating your iPhone: over the air and through iTunes
It should be noted right away: what do we even need to move to the new version of the iOS operating system?
By air. Prepare a charged smartphone and check if there is a stable wireless Wi-Fi connection nearby.
Via iTunes. There will be more components here - a computer with Windows or Mac OS, iTunes installed, a USB cable.
How to update an iPhone over Wi-Fi
If you have a modern version of the iPhone, then this is the way to go. Updating via Wi-Fi is not only convenient, but also fast. You do not need to perform any manipulations with your computer - just a phone and a wireless connection. The process follows the following scheme:
We connect to the Internet and go to the "Settings" section, then we need to go to the "General" menu. Here you will find the "Software Update" button. The screenshot shows this section, an example is shown on an iOS 8.0 device.
You need to wait while your gadget communicates with Apple servers. After connecting, you will see the information on the latest version of the iOS operating system on the screen. The system will tell you if your device can upgrade to a new version or not.
Now we click on the "Update" button, after that the text of the license agreement will appear on the screen. To read it or not is everyone's choice, it remains to press the "Accept" button. Great, after this action a new version of iOS will start loading into the iPhone's memory.
As you can see, there are a minimum of keys on the screen, so a novice user can also handle updating the operating system, but there are features that you need to know about before installing. So, the installation files have been downloaded to the phone, the system will prompt you to restart the gadget - we confirm this action with the corresponding button.
It is desirable that the device has about 7 GB of free space, although this depends on the specific model. For example, the iPhone 5S required about 3.5 GB.
After the reboot, the automatic installation of iOS will start, you will need to reconnect your account to iCloud after the update is complete. The system will also offer to enable or disable various options, show all the necessary information about this update, after which you can use your iPhone.
I recommend using this method only if you have access to stable high-speed Wi-Fi. The update weighs a lot, and in order not to waste time, use a high-speed connection. If not, then go to the method with iTunes.
How to update iPhone via iTunes
So, there is no way to update via Wi-Fi, but you still want to upgrade to the new version. Therefore, let's complete this task using the official computer application - iTunes. By the way, in one of my previous articles, I already touched on a similar topic, all the details are in this article.
How to restore your iPhone yourself?
The first step is to download the latest version of iTunes. Download it from the official Apple website http://www.apple.com/ru/itunes/
The instructions below are for Windows and MAC OS.
The gadget must be connected to a computer using a USB cable. If your iPhone is not detected by the computer, then read the article below to fix this problem:
The computer does not see my iPhone, what should I do ??
Hope the computer has successfully detected your device and now feel free to launch the latest version of iTunes. If this is your first time performing this action, the program will need to detect the device. The procedure may take a couple of minutes. After that, you will see your iPhone in the iTunes window.
1. Click on the image and select the "Software update" section. After that, the application will start downloading the files for the update. We are waiting for the download to complete and give permission to install the new version of the operating system.
2. Done, iTunes will automatically install the software update on your device, you just have to wait for the process to complete.
This method has its own characteristics. You don't need to free up 5-7 GB to install the new version of iOS. The official application operates according to the following scheme: the installation files are downloaded first to the computer, and then installed on the phone. As for the update option via Wi-Fi, the installation files are downloaded to the device itself.
This method has other advantages as well. Cable Internet is still significantly ahead of wireless Wi-Fi in terms of speed. This means that the files will be downloaded quickly enough, despite the large size. On the forums, I often see error messages when trying to update.
In the following articles, I will try to pay attention to such issues in as much detail as possible. Therefore, if you do not want to miss the following articles, then subscribe to receive articles, since very soon I will arrange several interesting contests with cash prizes among my active subscribers. If you want to take part, then you must definitely be my subscriber. It's very easy to do, read this article and become a subscriber if you are not already:
How do I become a blog subscriber?
As you can see, the process of updating to the latest version of the operating system consists of a few simple steps. The system performs the main work in automatic mode. You only need to give permission for these actions. Now you know how to update your iPhone, how the process itself goes.
But you should also take care of the safety of your data. No one is safe from errors during the update, which can lead to the loss of important files. Below I have detailed how to create a backup. To get started, you can watch the following video:
How do I back up my iPhone?
Let's start right away with iTunes, as it's easier to back up here. The process is as follows:
1. We connect the gadget to the computer using a USB cable and select your iPhone at the top of the window.
2. On the right side of the screen, you will see options to create copies: your computer or iCloud. Choosing a suitable option. If you want to encrypt a copy, then click on the corresponding button in the menu. Make a note of the password, as without it you will not be able to access this copy.
3. Great, now click on the "Create a copy now" button.
4. After that, the program for creating a copy will start, which will work in automatic mode. iTunes will inform you when the procedure is complete. As for the choice, the professionals recommend choosing both options at once. For iCloud, Apple provides 5GB of free space for free. Then you have to pay.
ICloud backup
If you want to keep a copy only on the iCloud service, then you do not need to use iTunes to do this. It is enough to run the backup function in the device itself. Go to "Settings", then go to the "iCloud" section, select "Storage and copies" "Save to iCloud".
A copy will be created daily, but there are conditions for this:
The gadget must be in screen lock mode.
The device is connected to a power source.
There is a Wi-Fi internet connection.
In fact, it is very convenient - we come home, put the phone on charge, and a copy is created automatically. At the same time, it is important for you to know that your iPhone must be connected to the Internet, otherwise there is no other way.
So, concluding today's material - "How to update your iPhone", it is hoped that today's instructions will be an excellent guide for you if you suddenly decide to update your iPhone. In conclusion, I can recommend you to read the following useful articles:
How to transfer contacts from one iPhone to another easily and quickly?
How do I flash my phone through a computer?
Dear users, if after reading this article you have any questions or you want to add something about the subject of this article or the entire Internet resource as a whole, then you can use the comment form. Also ask your questions, suggestions, wishes ..
So, for today this is actually all that I wanted to tell you about in today's issue. I hope that you have found interesting and useful information for yourself in this article. Well, I, in turn, am waiting for your questions, wishes or suggestions regarding this article or the entire site as a whole.
temowind.ru
How to Best Update iPhone via iTunes or Over the Air
Don't update your iPhone over the air (Wi-Fi)!
How to Reflash iPhone or iPad, iOS Restore and Update | Apple
How to Install iOS 10 Correctly - Looking at the iPhone 5S | ARSIK
How to update iPhone via iTunes (computer)
How does iOS 11 Beta 1 work on iPhone 5S?
iOS 10 How to Clean Install iPhone Firmware? Upgrade to release? detailed instructions
Iphone. iOS Upgrade from 10.2 to 10.2.1
📲How to Update iOS on iPhone - iPhone Update.
iOS 11 Beta LAGS! How to downgrade to iOS 10?
How to install and uninstall iOS 11 Beta
Also see:
- The iPhone fell into the snow, the speaker turned off what to do
- How to add oil to stocks on iPhone
- How to turn on the front camera on an iPhone in a periscope
- How to transfer photos from iPhone to computer via bluetooth
- IPhone a1387 emc 2430 how to disassemble
- What happens if you put your iPhone in the microwave
- How to transfer contacts from Outlook to iPhone
- How to transfer contacts from Android to iPhone via bluetooth
- Missing iPhone music
- Remove iPhone stock icon
- Apple iPhone 5S 32GB Mobile Phone Like New Silver
- How to track an iPhone if it is stolen and turned off
- How to set up Apple Watch videos
- How to properly turn on a new iPhone
- Estimated release date for iPhone 7
iphone4gkupi.ru
How do I update correctly on iOS 8? - AppStudio project
The release of any significant iOS update raises a wave of the same type of questions in our editorial mail. And each time a dilemma arises: answer the same thing to everyone, or publish explanations on the site so that everyone can see them. Answering all the same is long and boring. Publishing banal things on the site - to the appearance of comments in the style of "well, what are you writing for idiots?" However, the second option is still more useful; it is worth remembering that: 1) not everyone reads our site for a long time and remembers what was written a year, two or five years ago; 2) not everyone has owned iPhones and iPads for several years.
Therefore, we will answer a few standard questions about how to properly update to iOS 8.
Apple traditionally offers three ways to update to new firmware: update over the air, update via iTunes, and restore via iTunes.
Upgrade over the air
Updating to iOS 8 over the air is by far the easiest way. You go to the Settings-Basic-Software update menu, agree to the update, wait for it to be downloaded, unpacked and installed.
During the update, it is highly desirable to put the device on charge, because the battery during the update of the firmware can run out much faster, and depletion of the charge during the update will not end well. This update method on iOS 8 has two drawbacks:
- it requires a decent amount of free space on the device. Depending on the generation of the iOS gadget, the G8 may request from 4 to 7 GB of space. If you do not have it, the update will not start.
- update over the air is completely incompatible with jailbreak. Due to the fact that the contents of the iOS system partition are modified during jailbreak, the update files over the air simply have nowhere to deploy
Since the over-the-air update does not require a computer connection, you will not be prompted to back up your existing data. But this should be done without fail, because any problem during the update will most likely result in the need to erase the contents of the gadget along with all your data.
There are two ways to back up - using a computer (which is noticeably faster) and using iCloud. If you've backed up to your computer before, you can check it in iTunes. Connect the device to your computer and go to its properties page in iTunes. See what will be written under the heading "Last Copy":
If you already have a backup copy on your computer, click the "Create a copy now" button and wait until the process is finished.
If you have never created backups on your computer (and remember this for sure), then it is better to use iCloud. To do this, turn on Wi-Fi, put the iOS device on charge and in the device settings go to the iCloud-Storage and copies section. Activate the "Copy to iCloud" option there:
Wait for the process to finish. Depending on the amount of content on the device, it can take up to several hours.
Updating via iTunes
Updating via iTunes is a slightly more complicated and time-consuming method. You connect an iOS gadget to your computer, launch iTunes, go to the device page and click the "Refresh" button and agree to download.
iTunes first downloads the firmware to your computer, then starts uploading it to your device. As a result of the update, all your data should be preserved. However, in case something goes wrong, we recommend that you create a backup in iTunes or iCloud (see the previous paragraph).
Updating via iTunes is not recommended for jailbreak users. First, the procedure may simply not be completed. Secondly, after installing a new version of iOS on top of a jailbroken old version, you will most likely encounter various bugs related to traces of the jail in the system. And of course, after the update, the jailbreak will disappear.
Restore via iTunes
This is the most reliable, but most difficult method. You will have to resort to it if you have problems during the first or second of the methods described above. First of all, be sure to make a backup copy using any of the methods (see the first part of this article). Then connect the iOS device to the computer, hold down the Home and Power buttons for exactly 10 seconds, then release Home, and hold Power until iTunes displays a message stating that it has found the device in recovery mode:
In iTunes, click the "Restore" button, wait for the firmware to download and install. After the restore is complete, the initial iOS setup wizard will prompt you to connect to Wi-Fi and allow you to restore from an iTunes or iCloud backup.
Which way to choose?
Let's summarize what was written above:
- if you have a jailbreak - recovery only
- if you do not have a jailbreak - update via iTunes or over the air
- if you rarely connect your iOS device to your computer - update over the air
- if the update over the air or via iTunes failed, and the device freezes - restore via iTunes
As you can see, there is nothing fundamentally difficult in organizing the flashing of iOS devices on iOS 8. Good luck! ;)
appstudio.org
How to update an iPhone through iTunes
From time to time, Apple releases new versions of the iOS operating system. Sometimes there are situations when the smartphone displays a message about the need to install a more modern modification of the operating system, but there is no way to connect to Wi-Fi.
In this case, the owners of Apple mobile devices have a quite natural question: is it possible to update the iPhone via iTunes. This article will provide detailed answers to this question.
What is iTunes?
iTunes is a special program developed by Apple. To get started with this program, you need to install it on your computer after purchasing your mobile device from Apple. Without this application, it is impossible to control a mobile device from a computer. To download the iTunes program, you need to use the official website of the developer company. The program is distributed free of charge. After downloading the application, you must install it on your computer.
ITunes is compatible with various versions of Windows and Mac OS. Before you start updating and restoring your mobile device, you need to back up your iPad or iPhone to your computer. Thanks to this action, in the future you will be able to recover data on the gadget if problems arise during the execution of any processes. How to update iPhone via computer? We will talk about this a little later. Now let's pay attention to the issue of creating a backup copy of the iPhone.
Making backups
The best place to store a backup is your computer's hard drive. In this situation, access to the file will be open even if there is no Internet connection. In addition, such a choice of storage location allows you to extract information from a backup copy, if necessary. Therefore, you need to create such a backup before updating your iPhone. To do this, you need to perform the following sequence of actions:
Connect the iPhone to the computer using a USB cable; - launch the iTunes program and make sure that you are using the latest version of the program; - select the "File" menu item in the upper left corner of the program's working window; - click in the "Devices" section; - click on item "Create a backup copy";
There is also another way to create a backup for an iOS device. To perform this action, you need to go to the sync settings in the iTunes application, select the "Backups" item, select the "Automatic backups" section in it, select "This computer" and click on the "Create a copy now" button.
There are two known ways to update iPhone using iTunes. Both of these methods will be described below.
Method one
If the iPhone requires you to download an updated version of the operating system, but it is not possible to connect to Wi-Fi, then this process can be performed using a personal computer. To do this, follow these steps. Connect iPhone to PC with USB cable. Launch the iTunes app and make sure you have the latest version of the app installed on your computer. On the top panel of the program window, click on the phone icon and click on the "Software update" button.
There are positive aspects to updating iPhone using iTunes. In this case, the installation files are downloaded directly to the smartphone itself. This means that you do not need to specifically free up space for them on the iPhone memory card. The disadvantage of this update method is that if the computer or iPhone is turned off while installing the update, then all data that was stored on the iPhone will be lost. Now you know how you can update your iPhone using your personal computer and the iTunes application. Let's see how else you can update.
Method two
Is there a way to update iPhone using iTunes and at the same time eliminate the possibility of losing all the necessary information in case of an error? To do this, you must perform the following sequence of actions. Download the file of the version of the iOS operating system you need. Turn off Find My iPhone on your smartphone. Launch iTunes and make sure it doesn't need an update. Use a USB cable to connect your iPhone to your computer. Go to the synchronization settings by clicking on the phone icon in the upper part of the application working window.
Hold down the Shift key and click Refresh. Next, select the required firmware file, which has the ipsw extension. Click on the "Open" button and then on the "Refresh" button. The process of installing the updated version of iOS on the smartphone will start. If the system fails during the update, the process can be started again. In doing so, you will not lose information from the iPhone. Below, the process of updating iOS on iPhone by recovery will be described.
Recovery
After performing the recovery procedure, all data that was stored on the phone will be deleted. That is why, before carrying out this procedure, it is necessary to back up the information stored on the mobile device. How to update iPhone via recovery procedure? To perform this action, you must do the following:
Download the file of the version of iOS you need; - launch iTunes and make sure that it does not need an update; - connect iPhone to the computer using a USB cable; - go to the sync settings. To do this, click on the phone icon located in the upper panel of the program - click on the "Restore iPhone ..." button while holding down the "Shift" button. For Mac OS, you need to hold down the "Alt" button; - select the firmware file with the .ipsw extension; - click on the "Open" button, and then on the "Restore" button;
ITunes also provides the ability to restore iPhone without downloading a firmware file. In this case, the program will automatically perform this procedure after pressing the appropriate button in the synchronization settings window. The danger of this procedure is as follows: if iTunes finds that it is possible to install a newer version of the system, it will definitely install it. As a result, all settings of the mobile device will be reset, and all important information that was stored on the iPhone will be lost.
Conclusion
From time to time, owners of iPhone of various models need to install a more recent version of the iOS operating system using a special iTunes application. How does an iPhone update through iTunes? To carry out this procedure, you can use the methods described above. This process is not particularly difficult, then you need to pay attention to the existing warnings. This will allow you to avoid losing important information stored on your mobile device.
bezwindowsa.ru
How to properly prepare your iPhone or iPad for the iOS 8 update
The public release of iOS 8, which will contain a huge number of improvements and new features, will take place in the next hour and now is the time to prepare your favorite iPhone, iPad and iPod touch for the big update. We've broken down the preparation process into several steps, by going through which you will be fully prepared to update to iOS 8 as soon as it becomes available.
1. Check the compatibility of your device
Before you start, you need to make sure your device supports iOS 8. The list of iOS 8 compatible devices is as follows:
- iPhone 4S
- iPhone 5
- iPhone 5S
- iPhone 5C
- iPad 2
- iPad 3
- iPad 4
- iPad Air
- iPad mini
- iPad mini Retina
- iPod touch 5
From experience, we can immediately tell that the oldest devices on this list (iPhone 4s and iPad 2) will have some limitations in functionality and not as good performance as the latest devices. If you do not find your device in the list, then you will not be able to try the new OS with its great features. Although this has its plus, it's a great reason to upgrade to the new iPhone 6, isn't it?
2. Consider whether you should upgrade?
This question concerns the owners of the above-mentioned iPhone 4s, iPad 2 and iPad mini. Apple officially added them to the list of supported devices and technically they can run on iOS 8. But is it necessary? The responsiveness level will be significantly lower than on newer devices, and here you need to think twice if you should still upgrade, since it will no longer be possible to return to the previous version of iOS.
This is a private matter for everyone, but if you still prefer to get a new OS and use all its functions, keep in mind that the device will run slower than on the same iOS 7.
3. Remove unnecessary applications
Global iOS updates are the best time to get rid of the load of unnecessary and unused applications that have accumulated lately. Probably, about half of the applications that we install are launched once or twice, and after that they lie dead, only taking up free space. This is especially true for large applications such as games or professional applications like Garage Band, although there are plenty of them too for the little things. Review all of your applications and ask yourself the question: “How long have I started them?”. If the answer is “never” or “a very long time ago,” feel free to delete them.
4. Update apps
Now that you've gotten rid of the accumulated junk, open the App Store and update any apps that remain. It is a great habit to keep applications up to date, all the more important it is before the release of global updates, since they are necessary for compatibility with new functions. Yes, after installing iOS 8, you will have to update some applications again, as many of them will support extensions and widgets, and they will be incompatible with the previous version.
5. Back up important documents and files
Before upgrading, it is a good idea to save important files, which are usually photos and videos. An iTunes or iCloud backup is great, but you never need to be careful, so take a little time to connect your iPhone or iPad to your computer and save your accumulated photos and videos. After all, photos are not applications that you can download again at any time, so it's better to worry about this in advance.
6. Back up your iOS device
Well, and the last step is an iPhone or iPad backup, which will restore all your files, applications, their parameters and settings. There are two ways to create backups, and both of you are probably familiar - this is creating a backup through iTunes; and iCloud, right from your device. Just in case, I recommend that you use both.
- Making a backup in iTunes is very simple - connect your device to a Mac or PC and on the main tab, click the Create a backup button. (before that, do not forget to turn on the Copy to iCloud toggle switch)
- It's even easier with iCloud. Open the iOS system settings, go to the iCloud section and select Storage & Copies - Create a copy.
That's all, now you are completely ready to update to iOS 8. Do you have any questions, comments or suggestions? Welcome to comments - I'm always happy to chat and help. Stay tuned, there is still a lot of interesting things to come!
Apple regularly releases software updates for all supported device models. On our website, in every news about the release of new versions of iOS for iPhone and iPad, we strongly recommend that you not only make backup copies of data before installing the update, but also install the update via iTunes on your computer. Why? - many of our Clients ask. In this article we will try to answer this question in detail.
Why not update iOS over Wi-Fi?
Of course, the built-in iOS update system is very handy. A new version of the software is released and it is immediately available right on your iPhone or iPad. It is enough to go to the appropriate section of the device settings and click the "Update" button. The new software will be downloaded and installed, and you will be able to enjoy all the innovations and improvements. Everything is cool and comfortable, but ...
Over the years of practice in the repair and software maintenance of Apple equipment, there is clearly a tendency to the appearance of various glitches, errors or incorrect operation of the iPhone or iPad precisely after updating the firmware via Wi-Fi. How can this be manifested? Most often, users are faced with the problem of fast discharge (the iPhone is quickly discharged after the update) and systematic glitches at work (the iPhone began to work slower after the update, the iPhone freezes after the update). There are also special cases of manifestation of various problems related to the reception of a cellular network signal, the operation of Wi-Fi, or the incorrect operation of the built-in functions of iOS.
One way or another, over the years of work, more than one hundred people have contacted us with complaints about the unstable operation of their phone or tablet precisely after installing the update via Wi-Fi. As the famous phrase goes: "Coincidence? I don't think so" 🙂
What's the difference between updating via iTunes?
When updating the iOS software via Wi-Fi from version to version, only a part of the firmware is downloaded to the device, which contains the changes and innovations incorporated into it. The base remains the system that was on the device before the update. Therefore, if there were errors at the level of system files on the iPhone or iPad before the update, updating the firmware via Wi-Fi most often will not fix these errors, and in some cases will even aggravate them. Updating via iTunes involves reinstalling the entire operating system.
This means that in fact the system is reinstalled cleanly and most errors and glitches in the work, which may be caused by malfunctions of the operating system, are eliminated. If the update via iTunes over the existing system does not work, then in such cases you need to reinstall the system from scratch and check the operation of the device after that.
How to reinstall iOS on iPhone or iPad?
First, if necessary, save all the necessary data and files stored on the device. Then you need a Mac or PC with iTunes installed, in which, when detecting a phone or tablet, you need to download the latest firmware for your device. After the download is complete, you will need to enter the password code, if it is set, and the installation of the system will begin. This process, depending on the speed of the Internet connection and the parameters of the computer, can take from 20 minutes to 1-2 hours.
If you do not want to reinstall and update the iPhone / iPad yourself, or you are not sure that you can do it yourself, contact the service center. Our experts will always be happy to help in solving the problems of your phone or tablet.
Apple gadgets are popular with users all over the world. Fans of the company especially appreciate that new products appear in products almost every year. The design, as a rule, does not change significantly. But performance and other technical characteristics are always improving.
The developers pay much attention to the development of the "operating system" of tablets and iPhones, constantly working to improve it. Most importantly, users receive notifications directly to their devices that the time has come to update their iOS.
But then it's up to the user. You will have to take some steps to reflash the device. Usually, in such situations, almost everyone turns to the PC and the iTunes utility. The second most popular method is using Wi-Fi. It must be admitted that this procedure is very useful. If you update your iPad via iTunes, the system will run much faster and errors will be minimized.
Updating the iPad via iTunes (that is, via a computer) will be easy even for a user who bought a tablet from an Apple company for the first time. But even experienced owners of iPads, as statistics show, prefer to update their devices in this way. It doesn't matter for him whether there is a network or not, he only needs to have access to a PC or laptop.
How to update the iPad via iTunes - we will analyze it step by step further.
Before the update operation, you need to carefully prepare. And this procedure will consist of generating a copy of all data and content stored on the iPad. Anything can happen at the firmware input, and information can be lost. To prevent this from happening, let's take care of the backup.
The best storage space for copies is the hard drives of a PC or laptop, and also the iCloud cloud. But the first method is preferable, because even in the absence of a network connection, data recovery can be done.
Thus, the formation of a copy is a prerequisite for starting the update operation of the tablet. By ignoring it, the user can say goodbye to all the data that he has collected on his device for a long time.
This will require:
1 Connect the USB cable to your laptop or PC (be sure to use a 100% original accessory). 2 Double-check if the most recent version of iTunes is on your PC. If this is not the case, you should download the latest version from the Apple resource. 3 Run the utility. 4 Stop at point file. 5 Select devices and click on the name of your gadget. 6 Click on the name of the section that assumes the creation of the copy.After completing the 6th step, you can only wait. After a couple of minutes, everything that was in the tablet's memory will be saved to a copy. But note that backup is allowed in other ways. For example, directly in the interface of the same utility, in the settings. Here you need to click on the item for creating copies, and select the option of immediate creation. Then everything will happen fully automatically.
Getting an updated iPad via iTunes
With the use of this software, you can reflash your tablet in 2 ways.
Both methods allow the user to do without a network connection. All you need to update is a PC with the utility. And the whole process will consist in performing a few simple steps:
1 Connecting the gadget to a PC or laptop via a USB cable. 2 Launching the most recent version of the utility. As with the formation of a backup, here you need the last version of the program. You can always download it completely free of charge from the Apple resource on the network. 3 Click on the device image and select the program update item.That, in fact, is the whole operation. The updated device will be ready for use in a couple of minutes.
In addition to the above, I would like to dwell on the pros and cons of the firmware. The good news is that the download takes place in the gadget, and the user does not have to worry about where to store the files. That is, he does not need to find free megabytes of space on his PC and erase something for this. The negative point is that in the event of any malfunctions, the device will turn off, all information will be irretrievably lost. Therefore, before the operation, it is strongly recommended to take care of recharging the tablet so that its level is more than 70%. Otherwise, there will be a high risk of data loss.
The second method is excellent in that even in critical situations, no matter what happens during the flashing, information will not be lost. After all, both a tablet and a PC can turn off, for example, when the battery is discharged.
At the beginning of the process, the user needs to find the latest version of the "RAM" on the network and download to the PC. Disable the device search option on the device. And everything that happens next, as in the first method, will be easy to perform.
To update the "operating system" iPad, follow this algorithm:
1 Open iTunes Utility. 2 Recheck it for freshness. If the product is outdated, update it. And only then go to the 3rd step. 3 Click on the picture of the gadget (you can easily find it in the data exchange settings, at the very top of the window). 4 Press the Shift key on the PC, thereby starting the main task - updating the "operating system". 5 In the list of files, find the required iOS version (there must be an ipsw extension . 6 Click consecutively on the items of opening and updating.As with the first method, it took 6 steps. The operation will be performed fully automatically after the 6th action. If any mistakes come up, you will need to try again and start from the first step. The main thing is that you will not need to worry about the safety of the content.
The above 2 methods of updating a tablet can be performed by any user. And you don't even need to find out which version of the "operating system" will have to change the previous iOS - the system will send a notification when the time comes.
And, most importantly, we emphasize once again that all methods are performed without connecting to the network. But there are also opponents of using iTunes to flash iPad. It is better for such users to turn to the Wi-Fi update method.
When a new version of the iOS operating system entered the software market, all users were interested in how to update iOS on. Read on for details on how to do this.
Installing new operating systems is essential for anyone looking to get the most out of their tablet. Since many programs for Apple technology are written specifically for the latest firmware, the removal of old ones becomes an urgent need. on a device with an old version may not start due to their incompatibility with an outdated system.
The pros know how to update the iPad, but it comes at a cost. If you agree to pay for their expensive services, you can safely go to the service center. However, no one forbids to sort out this issue ourselves in order to further economize. Moreover, for this you do not need to be a master or to understand technology in general.
The most recent Apple update was the release of OS 6. It differs from previous firmwares in that it has new three-dimensional maps, Siri, and an integrated social network Facebok.
How to update iPad to this version, we will tell you further.
iOs to the latest version
There are two ways to update iOS on iPad. You can make your own choice, which will be easier for you: to act through a phone or a computer. However, first make sure of the following:
- That you have set a "point of no return";
- That you have saved all the SHSH blobs certificates if you own a jailbroken device, as usually its new version comes out later than the operating system update;
- That the tablet has enough memory;
- That the charge of the updated device is full, since the process itself will require the absorption of a large amount of energy.
If you do not check any of the points presented, then you risk not only failing to achieve a result, but also becoming the owner of a "dummy". To resume working functions, you will have to contact the service center and pay a lot of money for it.
How to install a new system via a computer
This method will be needed by those who own an Apple tablet with a version older than fifth. The rest of the owners can use an easier way to update through.
Please update iTunes to the latest version before updating your iPad via computer. During installation, the program will ask you to install also iCloud to be able to access it. After completing these steps, connect your tablet to your PC and start updating.
If you have already updated the system before, now the iPad will update automatically:
- Launch iTunes and click "Cancel" when the program asks you to update the system;
- Next, connect the device and wait for the synchronization automatically. If it does not happen, then by selecting the "File" section in the menu, click "Synchronize";
- Then select the connected iPad in "Devices";
- On the iPad screen, tap Refresh.
The update will take place within a few minutes. Do not be alarmed if it starts rebooting several times - it should be so.
How to install a new system over Wi-Fi
The owner of the original device version 5 and higher can use the quick way to update the system. It only requires an available Wi-Fi hotspot. Then we proceed as follows.
