How to setup channels on sony bravia. How to set up digital TV on a Sony BRAVIA TV

Tuning digital channels on Sony TVs

(on the example of model KDL 32EX 402)

Depending on the model, the interface and menu structure may differ, but the general meaning and procedure remains relevant.

1. Enter the main menu by pressing the button on the remote control. In the "Settings" section, select "Settings"

Attention! Some models may ask for a PIN during one of the setup steps. If you have not installed your own, try entering one of the standard ones: 0000, 1111, 1234

2. Select "Digital Configuration"

Attention! If your model does not have this item, you can select the "Autostart" item and proceed to step number 5

3. Select "Digital Tuning"

4. Select the item “Auto search for numbers. stations."

5. Select the type of connection "Cable"

Attention! If your TV does not prompt you to make this choice, then either you need to specify the country (this can be done in the menu "Settings" > "Settings" > "Auto search")

6. Enter channel search parameters:

Scan Type Fast

Frequency (start frequency) 306000

End frequency 354000

Symbol rate 7000

Modulation 128 QAM

Network access code (Network ID) Auto

Depending on the TV model and the selected country, some settings may not need to be entered.

7. If everything is done correctly, then the TV should find about 58 TV channels

8. After searching for channels, you need to set the internal clock of the TV, to do this, return to the main menu and follow the following route:

"Settings" > "Settings" > "Digital configuration" > "Tech. configuration"

9. In the menu that opens, set the time zone to "GMT"

Attention! Depending on the year of manufacture of the TV, you will need to enable or disable automatic daylight saving time

The instruction on how to set up a Sony TV is universal, suitable for almost all models. The menu interface is similar, so there are no significant differences.

Experts note that the Sony brand plasma menu is more complicated than that of TVs from other brands. It is sometimes difficult for the user to understand the incomprehensible designations of additional functions that the panel is equipped with applications.

Before connecting the device to the network, it is necessary to check whether all the cords are connected correctly and whether they are firmly fixed. After turning on the TV, you need to wait a while for the installation of the system to be completely completed, only after that you can proceed with the basic settings of the Sony brand TV.

All actions are performed using the control panel. Parameters such as sound, picture, internet connection and sound system must be adjusted in the HOME menu. This is the main tab, all the necessary settings for the Sony TV are made in it.

Automatic channel search

Setting up a Sony TV begins with a search for TV channels. On new models, it is performed automatically. To start the operation, you need to hold the "MENU" button for several seconds, the standard settings for searching TV channels will appear on the TV screen.

During the procedure, interference and channels found by the device will be displayed on the TV screen. When the search operation is completed and the channels are running in the correct order, the screen will return to normal operation.

Search for digital TV channels

The digital channels are configured according to the following scheme:

1. Go to the "Main Menu" tab by pressing the Home button on the remote control.
2. Select the "Digital configuration" section, if there is no such section, then select "Autostart" and immediately go to step number 5.
3. Tab "Digital tuning" - "Automatic search for digital stations".
4. Select a cable type connection.
5. You must enter the parameters required for the search.
6. If all actions are performed correctly, the device will find digital programs available for viewing.
7. To enable the internal clock, perform the following steps: "installation" - "digital configuration" - "technical configuration".

1. In the tab that appears, select the GMT time zone .

This is the main way to tune in digital channels on a Sony TV.

In order to install channels on Trinitron models, you must adhere to the following rules:

1. Press simultaneously two keys on the remote control (up arrow and right arrow).
2. Using the PROG button, select the channel number to be infused.
3. Press the button (up arrow) and the keys next to it.
4. In order for the sound to appear, hold the key (arrow up), as well as the key with an asterisk.
5. Remember the desired channel and press the two keys on the remote control (arrow up and right).
6. Operation completed.
7. If you couldn’t find the TV in this way, this means that the device has problems with the memory block, repairs are needed, it is recommended to contact the technical center.

The best option is how to set up channels on a Sony Trinitron TV. Detailed information can be found in the instructions supplied by the manufacturer to the device.. If there is no paper copy, it is recommended to find its virtual version on the company's website. The user needs to thoroughly study the instructions for his model in order to avoid problems during the connection of equipment.

Also read and.

How to set up a Sony TV? First, adjust the picture and sound settings. Then proceed to search and save TV channels. Users are offered two modes - automatic and manual.

Modern TV models from a well-known Japanese brand support all digital signal standards. The search for TV channels is carried out through the built-in receiver. Additionally, you do not have to buy a receiver and connect it to the TV.

Especially for users who have not previously used Sony TV equipment, step-by-step instructions for setting up channels have been developed. We will also consider the features of setting the image, sound and other important parameters.

Correctly setting up the TV is within the power of each user. Just follow the advice from the pros. Setting the sound (volume, volume) is easier. Go to the corresponding tab of the main menu and select the optimal parameters.

Adjusting the image will take more time. In order for a clear and rich picture to appear on the screen, you need to adjust a lot of parameters. Now let's look at the basic subtleties of setting up a Sony TV.

Preparatory work

Save the image calibration chart below to a flash drive or external hard drive. Connect the memory stick to the TV via USB. Open the picture for customization through the media player.

On new Android TV models, calibration files are played from a DVD or Blu-Ray player. Since it is impossible to change the settings through the Album application.

First, we set up the main indicators. To do this, disable advanced options. Open the main menu and go to "Settings", and then to the "System Settings" tab and the "Eco" subsection, here turn off the light sensor.

Return to the main menu and again go to "Settings" and then to the "Picture" tab to deactivate the following functions: reality creation, smooth transition, noise reduction.

For highlighting, set the value to 7 or 8 points. For Picture Mode, select Standard. When these changes are made, switch to the Advanced tab to deactivate all features.

Enter the settings menu only through the HOME button. If you edit the settings using the Options button, the set parameters will be applied to one signal source, and not to the TV as a whole.

Calibration

Start by checking that the image size settings are correct. The default settings enlarge the image. As a result, the sharpness drops. This manifests itself in the form of moiré, which can be seen on the contours of the resolution bands.

To adjust the picture size, open "Settings" and go to the "Screen Control" tab to turn off "Auto Display Area". Turn off the "Maximum resolution" function as well. Now arrows are visible in all corners. The moiré effect is gone.

Brightness

Calculate the darkest part of the grayscale band in the pre-downloaded chart. Adjust the brightness so that the black area (located on the left) is as dark as possible. Are there any differences between the left and right side of the screen? The brightness is set correctly.

Contrast

Find the lightest part of the diagram. Adjust the contrast until the right side of the screen is as light as possible. The difference between the left and right side of the chart should be noticeable.

sharpness

Oversharpening is the cause of an unnatural image. To avoid this, adjust the sharpness. There should be no light outline along the intersecting lines on the calibration chart. Lower the sharpness until the outline disappears completely.

Saturation of the color palette

Colors will be saturated when all transitions are visible in the chart for calibration. Take a look at the center of the scale to achieve a natural reproduction of shades.

Sound settings

Select the sound playback mode - internal speakers or external speaker system. There are no additional options. Just turn up the volume.

Extra options

Connect the antenna cable to the appropriate socket. Select the signal source "Antenna". Disable additional devices. The TV is now ready to search for TV channels.

How to connect a TV to a router? This option is available only to owners of TVs with Smart TV support. Synchronization is carried out via a Wi-Fi router or by connecting a cable to the LAN connector.

Automatic channel search

There are two ways to tune TV channels, let's start with automatic search. Take the remote control and open the main menu. Select the "Automatic channel search" command. In a few minutes, the TV will independently find and save the available TV channels.

While searching, the Sony TV screen will constantly change. Interference will appear intermittently. After the setup is completed, the device will start working in standard mode.

To adjust all channels on your Sony Bravia TV or find new ones, use the manual search function. It is also enabled through the main menu.

Manual channel search

Channels on a Sony TV are also manually tuned. Take the remote control. Open the main menu. Go to the "Manual channel search" section. Use the "+" and "-" buttons to change the frequencies. Gradually increase the value.

After such a setting, you need to fine-tune the quality of broadcasting. Use the Fine Tuning option. Apply it to every channel. After you have finished adjusting the image, save the result.

Channel setup

1. When you turn on the TV for the first time, select the language "Russian":

2. Choose the country "Russia":

3. Think up and enter a pin code. For example "1111":

4. Select the operating mode "Home":

5. Select the location of the TV. For example, "Desk Stand":

6. Select the type of broadcast "Digital and analog TV":

7. Select the type of TV connection "Cable":

8. Select the "Other" operator:

9. Select FREQUENCY TUNING - MANUAL

Set the frequency to 298 MHz
Select the "Start" menu item

Channel Sorting

How to enter sort mode

Press the “Home” button on the remote control, go to the “Settings” menu, select “Analog Channel Setup”:

In the menu that appears, select "Sort programs":

To go to the digital channel sorting menu, press the "Home" button on the remote control, go to the "Settings" menu, select "Digital configuration":

Select "Sorting Digital Programs":

How to sort channels.

From the list on the left, select the channel that you want to move to another position (the position number is displayed in the “Prg.” column) and press the center button on the remote control's D-pad:

After pressing the center button on the remote control, the selected channel will move to the right side of the screen. Fill in the "Enter program number" field with the desired position to which you want to move this channel, and press the center button on the remote control's D-pad:

The channel has moved to the position we have chosen:

Sorting of digital channels is performed in a similar way.

You can see the list of analogue channels for your city. You can use it for sorting.

Don't forget to select your city in the top menu of the site.

To begin with, here is a list of currently known TVs that have the ability to receive DVB-C digital cable TV.

SONY BRAVIA

Almost all models with letter indexes D, S, W, X, V, E, Z and a diagonal size of 32 inches or more. series: 3000/3500/4000/4020/4030/4050/4210/4500/4710/5300/5310/5500/5510/5600/5610/5710/5740

LOEWE

Almost all models.

SHARP

model: 46 (52, 65) XS1, LE700

PHILIPS

series: **PFL****N (in search menu: Country - include Sweden)

Toshiba

Series: AV633/RV633/AV635/RV635/XV635/V635/SV685/LV685

JVC

series: LT32DC1BH, LT26DC1BH

Panasonic

Series: TX-P42G10

LG Electronics

(in search menu: Country - include Sweden)

• LCD TV series: LH2000, LH3000, LH4000, LH5000, LH7000, LU4000, LU5000
• PLASMA TV series: PS3000, PS7000, PS8000, PQ200, PQ300, PQ600

SAMSUNG

decoding of SAMSUNG TV models:

DVB-C receiver is built into all models since 2009 (letter index B, C or D)! Before setting, you need to set the following parameters in the menu: Country - Slovakia or Slovenia, Auto search for digital and analog channels, Source - Cable, Full.

General digital channel tuning algorithms for various LCD TV models

SAMSUNG

1. Press to enter the menu - (green button);
2. Select in the menu - "Channel" (pictogram "Satellite dish");
3. Select - "Auto-tuning";
4. Choose - "Digital + analog";
5. Search mode - "Full";
6. Press - "Start"

PHILIPS

First, we read the stickers on the back of the TV, where separately for each tuner (DVB-T and DVB-C) there is a list of countries in which, according to Philips, there is digital broadcasting (at the time the TV was released, but if you update the firmware through their official site, then this list may change in subsequent firmware). If our country is not there, then we will have to put some other from this list. For Philips TVs, the step between frequencies should be eight. Search mode - "Full".

1. Click on the icon - "House";
2. Select - "Configuration";
3. Select - "Installation";
4. Select - "Digital mode";
5. Select - "Cable";
6. Choose - "Automatically";
7. We press - "Start".

Setup takes about 5-10 minutes.

2011 Philips TV models

1. Click on the icon - "House";
2. Select - "Installation";
3. Select "Search channels";
4. Select - "Reinstall channels";
5. We select - “the country that is indicated on the sticker on the back panel” (usually France, Finland or Germany);
6. Select the digital mode - "Cable (DVB-C)";
7. In the line "Network frequency" we drive in the frequency;
8. In the line "Baud rate" we drive in "6875";
9. Next, select the line "Scan frequencies".

Setup takes about 5-10 minutes.

LG

1. Press the button - "Menu";
2. Select in the menu - "Options";
3. Select - "Auto-tuning";
4. Choose a country - "France, Switzerland, Sweden or Finland";
5. Select the signal source - "Cable";
6. Choose - "Digital";
7. Press - "Search".

Setup takes about 5-10 minutes.

SHARP

If your TV model provides for the reception of digital channels, but there is no “DTV MENU” item, then we first select another country - France, Switzerland, Sweden or Finland.

1. Press the button - "DTV";
2. Press - "DTV MENU";
3. Choose - "Installation";
4. Select - "Auto installation";
5. We press - "OK".

Setup takes about 5-10 minutes.

SONY

Since not all SONY models are equipped with a digital cable TV tuner (DVB-C), you need to check the model of your SONY TV. Models equipped with a DVB-C tuner are marked KDL-**EX*** or KDL-**NX*** - for example KDL-32EX402R2 the first 3 letters in the model name (KDL) just indicate that the TV is "digital" . For models KLV-**BX*** etc. no DVB tuners.

1. Press the "MENU" button (for some models it is called "HOME" on the remote control (hereinafter referred to as the remote control). This button is usually blue;
2. Select the "Settings" item;
3. Find the "Digital configuration" menu in the list of settings, enter it;
4. Select "Auto search for digital stations";
5. A source selection window will open - select the type of TV connection. Select "cable";
6. In the item for selecting the type of scan - select the "full scan" mode:
   1. Or select "Manual";
   2. Next, enter the frequency;
   3. Leave the access code "Auto". Next, enter the symbol rate;
7. Click "start".

Wait for the TV to finish searching for channels.

Look at the bottom of your TV's OSD menu. The bottom menu bar displays hints with which remote control buttons to perform certain actions in the TV menu.

Panasonic

1. Press the button - "Menu";
2. Select the "Settings" item;
3. In the window that appears, select "Menu analogue. settings";
4. In the window that appears, select the item "Add TV signal";
5. In the table that opens, put a tick on the line "DVB-C" and going down, click "Start auto-tuning";
6. After searching for all digital channels, by going to the main menu in the "Settings" item, the line "DVB-C setup menu" appears. By selecting this item, you can correct the setting in manual mode (set the frequency and speed).;

The menu of your TV may differ from the suggested model. In this case, you need to find tabs that are similar in meaning. If your TV asks for a search step, enter 8 MHz.