How to set up your iPhone 5 when you turn it on for the first time. How to Factory Reset iPhone

Slowing down the speed of the iPhone - the scourge of all owners of "apple gadgets". The most painful problem hits users who are accustomed to actively exploiting the device and using hundreds of programs. To increase the speed of the programs on the iPhone, special programs that help set up your iPhone like new.

To start working on the iPhone, you need: after the operations, all data (videos, photos, music, contacts) will be erased, and no one wants to lose memories of significant moments in life and restore an extensive list of numbers.

Using the algorithm described in the article, you can increase the speed of both iPhone and iPad.

Preparing iPhone or iPad

Before accelerating the iPhone, the device needs to be prepared for the procedure. This is done as follows:

1. Updating iOS to the latest version... The smartphone must have an up-to-date version of the operating system. If for some reason this was not done earlier, then you need to go to the "Software update" section ("Settings" → "General" → "Software update"), check the installed version of iOS and, if necessary, download and install the update. If iPhone is running with Jailbreak, iTunes will be required to update the operating system.
2. Backup copy. You can create a backup copy of your smartphone in several ways:

• via iTunes: the phone must be connected to the computer, select the device in the list of available ones in iTunes, activate the switch "This computer", click the "Create a backup now" button, after completing the procedure, go to "Devices" and see if the backup has been created;

• via iCloud: you need to go to the "Backup" menu ("Settings" → iCloud → "Backup") and click the corresponding copy.

1. Disable messages... You need to turn off iMessage before speeding up your iPhone. To do this, you need to find the "Messages" item in the "Settings", go into it and press the appropriate key.
2. Disable Find My iPhone... The device search program at the time of device acceleration should also not work. Disabling "Find iPhone" is carried out through the item "iCloud" in the settings of the smartphone.

Having completed all the preparatory work, you can proceed to the next stage of work - cleaning the device.

Clearing data on iPhone or iPad

How to clean the device, you can find out more in our article (to factory settings) or briefly, using the following steps:

1. ... You can roll back the iPhone to the original version using the "Reset iPhone" key ("Settings", item "General").
2. Removing settings and content... At this step, you need to select the "Erase content and settings" button.
3. Confirmation... iPhone does not delete data immediately after pressing the keys: you need to confirm your choice to start the cleaning process.
4. Expectation... Before setting up the iPhone, you need to wait until all the information is deleted - this takes a few minutes.

If the cleaning process is completed correctly, no information will remain on the iPhone (other than the system information), and the device will display a welcome message on the screen. Did you do everything correctly? You can proceed to the most important thing - setting up your smartphone / tablet.

Set up iPhone as new

1. We select the item "Set up as a new iPhone" (appears in the greeting after clearing the smartphone of information).
2. We skip identification via Apple ID (this is necessary so that the phone settings saved in iCloud are not transferred to the device).
3. We complete the process.

Siri has always been a useful companion on the iPhone, but it has gotten a few new tricks lately. One of the best additions is the hands-free mode, allowing you to ask her questions even without unlocking your iPhone. Turn on this new feature in Settings> General> Siri> Allow Hey Siri. You need to set up Siri by repeating this phrase several times, and then everything will work.

Live Photos are kind of like magic photos from Harry Potter. Whenever you take a photo with this mode on, you will get a few seconds of video before and after the photo was taken. It's pretty amazing, but it can also use up a lot of extra storage space (and the iPhone SE starts at just 16GB). You can disable this feature by clicking on the icon (three circles) in the center of the upper part of the camera application; yellow means it is on and white means it is off.

If you are someone who has never used an iPhone before, or have been familiar with Apple products for years, the first thing you need to do with the new iPhone X, iPhone 8/8 Plus / 7s is to set it up. Once purchased, it is very easy to set up and activate your new iPhone, there are many ways to do it. Below is information on how to turn on iPhone X, iPhone 8/8 Plus / 7s / 7s Plus correctly?

Before installing and activating iPhone X, iPhone 8/8 Plus / 7s, there are a few steps to follow to avoid potential issues.

First, back up your old device.

There are 3 ways to make a backup so you don't lose data when switching to a new iPhone.

1) Backup using iTunes

Connect your old iPhone to iTunes and click the "devices" icon. In the Summary panel, select Backups.

2) Back up using iCloud.

On older iPhone, go to iCloud> Storage & Backup> iCloud Backup> Backup.

4. You can enable or disable location services at your discretion.

5. Set up Face ID, as well as Touch ID with your finger, as shown in the photo below.

6. Enter the 6-digit passcode to protect your iPhone X / 8/8 Plus.

7. Choose to restore from iCloud / iTunes backup or set it up as a new iPhone.

8. Log in with your previous Apple ID, or create a new ID if you haven't used an iPhone before.

9. Read the terms and conditions and click "Agree".

10. Add your Apple Pay card information.

11. Go to Settings> Siri & Search and make sure Hey Siri! and Siri Home Button are on.

12. Adjust the sensitivity of the touch screen by pressing on it.

13. Determine whether to share application diagnostics and analysis information with Apple developers.

14. Choose how you want your new iPhone to view: standard or zoomed.

15. Click "Get Started", iPhone installation and activation is now complete.

Activate your iPhone with iTunes

In this method, you will need a working SIM card inserted into the SIM card slot during the activation process.

Connect the appropriate device to the computer with iTunes installed. Create a backup, erase all content, and restart your device. Then disconnect the device from the PC, and reconnect to the PC using USB. Select the option to activate your iPhone. The system will prompt you to enter your Apple login and password.

Follow the instructions to activate. Once you're done setting up, pull out the sim card. You can now use your iPhone wirelessly.

How to Activate New iPhone X / 8/8 Plus Without SIM Card

If you currently don't have a SIM card or the SIM card is not supported, you can use iTunes to activate your device. It may not work when the network is blocked.

1. Connect iPhone X, iPhone 8/8 Plus / 7 to iTunes and it will automatically recognize your device.

2. Select “Set up a new iPhone” in the pop-up window and click “Next” to continue.

3. Follow the instructions to set up and activate your device.

However, if you receive the message “There is no SIM card inserted that you are trying to activate” from iTunes, it means that your iPhone is locked. You can ask your friends for a SIM to activate it, or contact your carrier to unlock your iPhone.

Common problems when setting up iPhone X / 8/8 Plus

During the setup process, a small number of users may have no luck activating the iPhone X / 8/8 Plus. If you are one of these “lucky ones”, don't worry and try the methods below:

1. Check if Wi-Fi connections are available.

2. Check if your SIM card is damaged or if it is installed correctly.

3. Wait for the connection to the Apple Server.

4. Reboot the new device.

5. Set up your new iPhone X, iPhone 8/8 Plus / 7 using iTunes.

iPhone X stuck on activation screen

1. Restart iPhone X, iPhone 8/8 Plus / 7 and try setting it up again.

2. Enter and exit recovery mode with the free one.

Can't restore backup from iCloud during setup

1. Wait for Apple Server to respond.

2. Make sure you are connected Wi-Fi.

3. Make sure iOS is compatible with iPhone X, iPhone 8/8 Plus / 7s is the same version with your old device that you used for backup. Update iOS 11 to the same version.

4. Use iCarFone or iTunes instead of iCloud to extract backup files. Compared to iTunes, one dominant advantage of iCareFone is file preview and selective restore back to new iPhone X, iPhone 8/8 Plus / 7s.

5. Contact Apple Support for assistance.

If you still have questions, write a comment, we will definitely help you.

Content

When buying a new gadget from Apple (iPad, iPod, iPhone), the owner needs to register and activate. This will help you avoid complications with using the device in the future and get it up and running to get started. There are several options for how to activate your phone. If you follow all the steps correctly, then there should be no problems with the launch.

What is iphone activation

In order for the phone to identify the cellular operator and register it in the network, you need to activate the device. IPhone activation is a process in which the IMSI (International Mobile Subscriber Identity) is read from the SIM card and redirected to the Apple server. There the data is analyzed, the identity of the SIM card to the cellular operator is confirmed, it is checked whether the subscriber has access to the network in which he is located.

Sometimes phones are sold already with a contract, i.e. they are "tied" to a specific operator. If you bought an "unlocked" iPhone, then the server will receive a unique code that is required to transfer the Lockdown module to an active state, which opens access to the mobile network. After turning on, the initial configuration is carried out, the owner specifies the region (geolocation), language and some other services. You will also have to activate the iPhone if you completely delete content or reset it to factory settings. In this case, you can carry out the restoration through the services of the company.

To activate the iPhone, you need to carry out the initial setup of the device. To do this, be sure to insert a SIM card into your phone. After turning on the device, the system will ask you to set the following parameters:

• language;
• region of residence;
• method of restoring from a backup;
• setting up additional services.

You will only be able to activate the gadget if you have a network connection. You can use Wi-Fi (the most convenient option) or a cable to connect to a stationary computer. The second option is preferable if you need to recover data from a cloud service. During the first start-up, the system will ask you to enter the data of your Internet connection; without going online, you will not be able to activate the iPhone.

After the initial settings, the device will offer you to connect to the network via Wi-Fi or using a SIM card (mobile Internet). If the SIM card is not at hand, then even wireless Wi-Fi will not help you, because the SIM card must be in the iPhone. Further, the unlocking and activation operation proceeds as follows (using the iTunes utility as an example):

• Connect the iPhone to the computer using the USB cable.
• Launch the iTunes app. The utility should itself recognize the connected device.
• Follow the small phone icon to the control menu.
• The program will ask you what actions you need to take with your mobile: set up from scratch, like a new device, or restore content from a backup.
• The first time you need to activate the device by selecting the item "as new".
• Then you need to provide an Apple ID - this is an account that is available in all Apple services. You can create it directly in iTunes from the "Account" section (just follow the instructions of the program and fill in all the fields from the form).
• If you wish, you can skip the above step by clicking on "No Apple ID or forgot it." Then, sequentially click on "Configure later" and "Do not use", but then you will not be able to buy content from the store and replenish your account for this.
• Complete the procedure by adjusting the screen as desired.

In what cases is it necessary

If you have a new iPhone, then there will be no problems with activation. Sometimes they sell stolen phones under the guise of new ones, but when trying to log in, the user is asked to enter data (account) that no one knows, and therefore there is no way to untie the device from Apple ID. The phone becomes useless because it cannot be started. The need to activate the gadget arises in the following cases:

1. When you turn it on for the first time. The initial setup and registration of a new device is carried out, it is completely empty and has no downloaded or purchased applications.
2. After erasing content and settings. If for some reason you had to clear your iPhone, then you can activate and fully restore the content using the iCloud service. It is a cloud storage that creates backups from your phone.
3. After restoring or updating your device in iTunes. You can save activation settings and data on your computer through the official application. Once connected, follow the instructions.

Is it possible to activate an iPhone without a SIM card

A vulnerability existed in intermediate versions of the Apple iOS 7.0-7.06 operating system. With the emergency call 112, it was possible to activate the gadget without an inserted SIM card. In OS version 7.1.2 and in all subsequent versions, this "hole" was eliminated. This vulnerability can no longer be exploited, so there is no longer an option to activate an iPhone without a SIM card.

If you decide to buy a new phone, make sure that the box has not been opened, it has factory "stickers", because you will not be able to activate the device "by hand" due to the connection to the Apple ID. To turn on your new phone, follow these steps:

• Open the device and insert a SIM card.
• Press the button labeled "Power".
• Connect your smartphone to your PC using a cord.
• Launch iTunes.
• Carry out the registration procedure.

This version of the smartphone is considered outdated, but it can still be purchased due to its reasonable price. Prepare a SIM card immediately and insert it into your mobile phone before turning it on. Hold down the "Power" button for 2-3 seconds and wait for the device to turn on. Carry out the initial settings of the parameters and complete the activation according to the following step-by-step instructions:

1. Indicate your region of residence, interface language.
2. Next, you will receive a request for geolocation (determining your location) through Yandex maps, Google maps for marking under photos on Instagram, Facebook, etc. The same function will help you find your lost device. You can opt out of using it and enable the function at any time later.
3. Then you will receive a request to connect to the Internet via a SIM card, Wi-Fi. This step does not have to be done right away either. You can postpone it, but in order to receive a unique code from the company's server, you will need the Internet to activate your iPhone. You can't use iCloud or iTunes Match without it either.
4. The next stage is registration of the mobile in the operator's network, receiving settings for MMS, SMS and other functions. If you already had an iPhone and want to restore the device's settings, the system will offer you to use backups from iCloud or iTunes services. If this is the first gadget, select "Set up a new device"
5. The next steps are not required to use the device, but it is better to follow them in order to complete the setup fully. Enter your Apple ID to access company services. Account creation is carried out according to a standard form and does not require payment.
6. After accepting the document "Rights and Responsibilities", activate the voice assistant.
7. The last point is permission to send diagnostic reports to the company.
8. Click "Get Started" and enjoy your device.

The procedure for configuring this version of the device is not much different from others. After unpacking the gadget, installing the SIM card and pressing the "Power on" button, you will see a white screen with a proposal to configure the phone. At all stages you will be accompanied by an assistant, the activation algorithm is as follows:

1. First, select the interface language (Russian), connect to Wi-Fi. As a rule, the language pack is determined depending on the region of sale, but you can change it. To connect to the Internet, select your network and enter the password. If your SIM card has mobile Internet, you can turn it on.
2. Next, activate your Apple ID - an account that you need to create in advance. It gives you access to a host of features in Apple's services. Without an account, some of them will be blocked.
3. To protect your phone when you lock it, create a short personal password or scan your fingerprint.
4. Set up iCloud storage, a "keychain" (credit card information and storage passwords).
5. Turn on or off location, Find My iPhone. This is a special tool that shows the location of the device if it is lost or stolen.
6. Register in the network of the communication provider using a special unique code from the Apple service.

How to activate an iPhone via iTunes

The official utility helps to set up a new phone, restore data after deleting content. Activation of iPhone 6 or older model is carried out through a computer using a USB cable and iTunes utility. This multifunctional application helps to save backups, register the device in the system, buy and download content for mobile. You can activate the iPhone using the following algorithm:

1. Install SIM in the phone and turn on the device. It will not work to activate the gadget without an operator card, this is a mandatory step.
2. Swipe your finger across the screen to turn it on. Immediately mark the country of residence, interface language.
3. Select your internet connection option (wireless or PC). To activate iTunes, connect your smartphone to your computer using the original supplied cable.
4. The program will automatically detect the connected device and start configuring it. To go to the control menu, click on the miniature phone icon.
5. When setting up an iPhone that's already linked to an Apple ID, provide your account information and sign in. If the phone is new, skip to the next step right away.
6. A window will appear with a choice of actions: restore from a backup or configure as new. In the first case, click the "Continue" button, wait until the data is copied from the cloud service. Do not interrupt this process (do not disconnect the device from the PC) until it is finished.
7. After the end of the recovery and activation, the gadget will reboot. Perform the initial setup and you can use your mobile.
8. If you are registering a phone for the first time, then you need to create an Apple ID account, receive an activation code from the company in the provider's network. All other steps are repeated (initial setup).

Restoration from backup storage can only be performed during the initial setup procedure. To do this, you will have to do a full reset and zero the phone. Then, using the assistant, you can upload the backup from iCloud. To restore, do the following:

1. Before resetting the settings, check if there are any fresh backups left in the cloud. To do this, open Settings, then - iCloud, then - Storage and copies. Scroll down the page, the last file should be up to date.
2. To start recovery, start the reset: open the settings, then - the "General" item, go to the "Reset" section and click on "Erase content and settings".
3. Enter the password if one was used for restriction.
4. Agree to the deletion of the content and click "Erase iPhone". Such cleaning will erase all data, including notes, contacts. Before that, check the correctness of the backup, make a "backup copy".
5. The progress of the removal process is indicated by a bar below the Apple logo. Wait for the process to complete.
6. Perform the initial setup, stop at the "Setting up iPhone" item.
7. Select "Recover from iCloud Copy".
8. When you see the window for specifying the Apple ID and password, agree to the terms, conditions of service and privacy policy, double-click "Accept".
9. If there was a password on the backup, create a new one. Then set up Touch ID, but you can skip this step and come back to it later.

Possible errors when activating an iPhone

Sometimes problems arise when registering a phone. There are several main reasons why the iPhone displays an activation failure message:

1. Apple server error. The activation site is currently unavailable. This is the most harmless version of the problem. Wait until the server is up and running. Typically, this error occurs when upgrading to a new firmware or with a major software update.
2. IPhone hardware problem. Failure to register can cause a malfunction of the SIM-card detection unit, which leads to a constant search for the network. If the Wi-Fi module does not work, connect the device to a PC. This problem can be identified in the service center after diagnosis.
3. IOS problem after restoring iPhone. It concerns devices that were handicraftly assembled in China from various components. These phones contain very few original spare parts. The activation problem arises due to changes in the rules of the device registration system on iOS 11. The server compares the technical information of the device (IMEI, Serial No, UDID, MAC-address) with the databases. If something does not match (and handicraft phones have up to 10 mismatches), then the device cannot be activated.

To protect against such problems, check the serial number of your phone when purchasing from a retailer. Go to the Apple website and enter the details from the box. If the message “The serial number is for the product that was replaced” appears, it is highly likely that an error will appear when you try to activate. If the information about the device does not match your iPhone in terms of memory size, color, model, then problems may also arise. If your phone was not restored at an official service center, be sure not to erase the content.

Video

Found a mistake in the text? Select it, press Ctrl + Enter and we'll fix it!

Apple's technique is one of the easiest to use. With each new version of iOS, developers are trying to simplify the system and make it as comfortable as possible for the owners. But despite this, inexperienced users still have problems with setting up Apple gadgets when they first activate. Let's analyze in detail all the settings and their nuances.

Setting up iPhone, iPad and iPod from scratch: a description of all points

The initial setup largely determines the level of quality and ease of interaction with the device. Despite the fact that many of its points can be skipped or changed later, for optimal operation of the gadget, it is recommended to perform all the necessary manipulations at the start.

Country selection, time and date setting

When your Apple device starts up, a welcome screen appears. Swiping it aside takes you to the language options for the interface. Next, you need to select a country. After that, based on the data on the time zone of the selected region, the time and date will be determined automatically.

Connecting to a wireless network

Connecting to Wi-Fi will be useful when performing the subsequent steps of setting up the device, in particular, creating a new Apple ID or connecting an existing one (in case you use the same authentication system on several Apple gadgets). However, if you intend to save time or simply do not have access to a Wi-Fi network at the moment, you can skip this step.

Geolocation

In this item of device settings, it is proposed to enable or disable geolocation. Geolocation services are responsible for collecting information about your geographic coordinates. They are used by applications such as Maps, Instagram, Camera, etc. to calculate your approximate location. You can also use location services to track your Apple device. This function will come in handy in case of loss or theft of a gadget. As for the advantages of turning off geolocation, it will save battery power.

You can activate and deactivate geolocation services at any time by going to the Apple settings. Also, their action is allowed to be limited for some programs.

Setting up iPhone, iPad, iPod

At this stage, it is proposed:

• set up your Apple device as new;
• restore it from an iCloud backup;
• restore the device from a backup on a local disk.

If your smartphone or tablet is brand new and you are customizing it from scratch, do not hesitate to choose the first item. However, when setting up a gadget after upgrading the firmware or restoring the system, the use of data backups will be more relevant.

Apple ID

The next step is to create an Apple ID or sign in to an existing account. Apple ID is an account that gives access to applications such as the App Store, Apple Music, iCloud, iMessage, FaceTime, etc. To create one, you will need to fill in the following information:

• FULL NAME.;
• e-mail to which the account will be linked;
• account password;
• select security questions and answers to them (required to restore your account);
• Date of Birth;
• spare e-mail;
• mailing address.

If you decide to skip this step, you can add or create a new Apple ID through the device settings at any time.

Terms of Use

Next, you must accept the terms of the license agreement for use. This item is mandatory and cannot be skipped. It's no secret that 99% of Apple users accept the terms of use without reading them. But if you decide in good faith to familiarize yourself with the full list of the nuances of the user agreement and still disagree with some point, the only way out is to reject the terms of use and return the device to the store.

Touch ID and password

Acceptance of the terms of use brings you to the final stages of setup - creating a fingerprint using Touch ID and password. These options will help protect your smartphone or tablet from unauthorized use. Confirmation of the password and / or fingerprint is required when unlocking the gadget (switching from the lock screen to the desktop) and logging into the App Store. You can skip this step and create a password and fingerprint at any other time by going to the iOS settings.

Touch ID works on Apple devices with a fingerprint reader, i.e. iPhone 5s and up. Older gadgets use a standard password.

Diagnostics

The final step requires you to agree or refuse to send system diagnostic data to Apple. The request is quite standard and there is nothing in it that would violate confidentiality. On the contrary, information about bugs and crashes in the iOS system will allow developers to improve it and fix deficiencies in future updates.

Having finished with the last stage of setup, all that remains is to click the "Get Started" button and enjoy using your Apple device.

First launch and setup of an iPad, iPhone or iPod immediately after purchase - video

Apple's initial setup doesn't take long and requires minimal tinkering. Most of the steps, namely connecting to Wi-Fi, geolocation, creating an Apple ID, Touch ID and password, can simply be postponed until later. The iOS system makes it possible not only to return to setting up all these options at any time, but also to change them in the future, based on personal preferences.