What is the best way to connect your computer to your TV. This method is considered one of the simplest

We think that many of you dreamed of connecting your TV to a computer in order to enjoy watching movies or playing a computer shooter not on a small monitor, but on a large TV screen. However, this is not always as easy as it seems. Today in our article we will reveal the main ways to connect modern TVs to a computer. Moreover, we intentionally do not consider connecting to old TV models, since due to the small screen resolution of such a TV, you will not be satisfied with the result anyway.

How can I connect a TV to a computer

First, let's decide with which cable you can connect the TV to the computer. To do this, you need to study which connectors are on your video card in the computer and which connectors are on the TV. All of them are, as a rule, on the back of the vehicle, so study it carefully. In our case, such connectors are important:

• HDMI (or HDMI-mini);
• SCART.

You can see the photos of each connector below:

The listed slots can be located both on the TV and on the computer (only it will not have SCART). It is not necessary that your equipment supports all connectors, the main thing is that you find compatible connectors and a suitable cable for them.

What kind of cables are there for connecting a computer?

• DVI - HDMI;
• DVI - VGA;
• DVI - DVI;
• HDMI - HDMI;
• HDMI - SCART;
• VGA - VGA.

In addition, there are various amplifiers and signal splitters that convert the signal and make it possible to connect a VGA TV to an HDMI slot, for example. However, it is difficult to find such products on store shelves, moreover, even few people know about them, so if such a situation arises, look for goods in online stores.

Once you have the cable, just connect one end to the TV, and the other to the computer and that's it. Now your TV is connected to your PC and you can use it. Although, before that, you still need to configure the connection itself in the operating system of your computer. We will talk about this further.

How to connect a TV in Windows 7 or 8

After you have connected the cable to the system unit and the TV, turned on the latter to the "PC" position (for this, there must be a special button on the TV control panel), then you can go directly to the setup.

1. Open the "Desktop" in front of you on your computer and right-click on an empty space to open the context menu, as shown in the screenshot below, and select "Screen Resolution":

2. A window will open in front of you, in which you need to first find the second monitor, if the system has not automatically found it. To do this, click on the "Find" button. In the picture below, it is marked at number 1. Then click "Apply" to fix the presence of a TV connected to the computer.

3. When the TV screen is connected, you need to align it with the computer, for example, it can be at the top (above the monitor), left or right. In the screenshot, under the action number "2" we have visually moved the TV screen unevenly relative to the main monitor to show the possibilities. Moving it is quite simple - hold down the left mouse button on the TV screen on the diagram and drag it to the side that would be convenient for you. For example, if the TV is on the left, then schematically place the screen on the left side to make dragging the windows easier. Otherwise you will get confused. After all, click the "Apply" button.

4. Now is the time to make a few corrections (if needed). A number of actions are highlighted in the picture above under the number "3". In order to enter them, select the TV screen on the diagram with the left mouse button, then specify or correct the resolution of the second display (TV), although Windows 7 and 8 always select them correctly themselves. Next, check the orientation, it should be landscape, unless your TV is suspended at a 90 degree angle. If you want the TV to be a kind of continuation of the monitor, so that, let's say, watch a movie on one monitor and work on the other, then select "Expand these screens" in the "Multiple displays" item. In addition, you can also duplicate screens so that the same picture is shown everywhere; or display one of the monitors.

5. You can make your TV your primary display. To do this, you need to left-click the display number two in the screenshot above and perform the action marked with the number “4” in the picture. That is, check the box. If you don’t want to change, then just don’t do anything.

6. Still everything in the same screenshot above there is a link to additional parameters, by clicking on which you can update the display drivers (check their availability in general); set the desired screen frequency; make adjustments to the color gamut of the monitor; and also go to the driver settings responsible for the graphical shell. The window will look something like this:

7. If all the manipulations with the setting are over, it's time to apply them. To do this, click on the button at the bottom of the "OK" window, or it was named under the number "5" in the previous screenshot.

What if the TV continues to stubbornly not connect to the computer?

To answer this question, you first need to figure out the reason for not connecting. After all, it can turn out to be both at the program level and completely at the physical level. We will analyze all these cases below.

• Check cable connections. Very often, newbies, fearing damage to the computer or TV, do not fully insert the plug into the special slot. If it is DVI or VGA, then the plug must also be secured with bolts that are located directly on the plug itself. There may also be a problem with the cable itself, try changing it or checking it on another PC.
• Check that the correct connector is selected. Try not to confuse VGA with DVI, as well as inputs and outputs, for example on the same SCART, where there is an input and output. It also happens that video cards have several DVI inputs, choose the one that fits your plug, or you have to buy an additional adapter.
• RebootWindows. Sometimes the system needs a reboot to see a new display (TV, in our case), therefore, experts recommend the site after installing the drivers or simply entering additional parameters, restart the PC and perhaps after that the TV will be found by the computer.
• Try to disconnect the wire and do all the above steps again. If you made a mistake at any stage, then you may have to disconnect the wire and do the above steps for connecting and configuring - again. Do not be lazy to do this, as calling a specialist will cost you a considerable amount of money.
• Check if the drivers are installed on the video card. If your operating system did not have the drivers installed on the video card, or a technical error was made during the installation, then most likely you will not be able to connect the TV correctly (the resolution will not be set at all, or the image will not be natural).
• Select the correct mode on your TV. If the computer sees the TV connection, but you still have nothing on the screen, then you have not correctly selected the mode. For example, instead of PC, they chose AV-1 or AV-2 or VHS in general. Be careful.
• Your TV is unable to see the signals sent by the computer. We do not exclude the possibility that the PC may not recognize the TV at all due to the peculiarities of the latter. Often this is found in Chinese models, where it seems that there is such an opportunity, but in practice there is nothing of the kind.
• Seek help from a specialist. And the last, probably the most correct option (but also the most expensive) would be to contact a service center. Here they will help you with a specific problem and find solutions. The point is that each of the cases is unique, it is impossible to foresee everything, because sometimes the TV may not connect due to common viruses.

You may need to connect your TV to your computer to watch movies on a big screen. Also, many modern games look very convenient and effective on. In general, connecting your TV to your PC is just adding a larger monitor to your computer.

How can a computer connect to a TV

There are a lot of ways and options. This is due to the fact that TV connectors do not always correspond to PC connectors. And in general, compliance came not so long ago with the advent of the HDMI standard. Thus, now more or less modern PC and TV models are equipped with homogeneous ports, and there is no need to look for adapters. With models whose release date is very different, everything is much more interesting. In fact, this type of connection boils down to bringing cables and adapters to one common denominator by selecting from the available ones. Let's take a look at what ports and connectors might look like on a PC and TV.

Signal ports on the computer

The most popular type of video output on a computer is D-Sub. But many people know it more as a VGA-connector, which received this name for using the VGA video transmission interface of the same name. This was the simplest solution to the problem of how to connect a TV to a computer instead of a monitor. It is easy to recognize it - it is a 15-pin connector, which is usually painted blue on a video card. The standard has been known since 1987 and has served faithfully all these years. However, it is gradually and inexorably pushed out of the market by "young" and more convenient standards. And in 2015, Intel and AMD dropped VGA support altogether.

The next link in the history of connectors was DVI. Unlike VGA, the interface assumes not only the transmission of an analog signal, but also a digital one. It is still used today, but much less popular. It is worth noting that DVI has several types that can transmit either analog or digital, or a combination of both. Externally, the connector can contain up to 29 pins in the case of dual-channel mode for digital and analog video.

S-Video connector is located a little to one side. This type is more often found on other various equipment - video cameras or VCRs. May also be present on some video cards.

S-Video is also called component video because it breaks up the video signal into its components. That is, luma and chroma are conveyed in different ways. For sound, you will have to connect a separate cable. It is also worth noting that S-Video cannot transmit high-definition signals. It is gradually becoming obsolete and replaced by more modern technologies.

Probably everyone has heard about HDMI. This is the most modern standard that allows not only video transmission up to 10K, but also sound. The latest version, 2.1, boasts transfer rates up to 48 Gbps. HDMI differs from DVI in higher resolution, audio support and compactness. It is actively implemented in all modern TVs and video cards.

Connectors for receiving a signal on a TV

Talking about HDMI is probably no longer worth it, since the computer connector is no different from the TV connector. The only thing worth considering is the versions on different devices when connected. The SCART connector appeared in 1978. It is still found on some models and devices. It is a fairly large 21-pin connector. Able to transmit video signal components, as well as audio, both analog and digital.

A component connector includes several connectors. This is necessary to break down video and audio signals into components. Thus, excellent quality is achieved by eliminating mixing noise. PC video cards are rarely equipped with such a set of outputs, so a special adapter is most often used.

The component connector divides both video and audio into components. By the way, in the photo there is a convenient adapter to HDMI

Composite, or RCA, also has signal separation. However, here the video is not divided into components, but comes over a single cable. Audio is for the other two. RCA can be found on older televisions. Most often this connector is called "tulips".

How to connect a computer to a TV using a cable in accordance with the available connectors

It is now worth considering in more detail how to connect various types of connectors to the same or different from them, what can be used for this, as well as how to connect speakers from a computer to the TV if the sound is not enough.

How to connect a TV to a computer via HDMI

This is the easiest and easiest way to connect your PC to your TV. You just need to insert the HDMI cable connectors into the corresponding connectors on the motherboard or video card of your computer, as well as in the TV. The only difficulty that can arise is the definition of monitors on the PC. But for this, in Windows operating systems in the control panel there is an item "Screen resolution", in which you can find the connected monitors, set the transmitted resolution on them and specify how it will be used - as an additional monitor or a duplicate of the main one.

How to connect a computer to a TV through tulips

Sometimes there are only primitive interfaces on TV, so let's see how to connect a TV to a computer without HDMI, VGA and other newfangled connectors. Tulips have three different plugs, one for video and two for audio. This approach has not been used on a PC for a long time. Therefore, you will have to look for an adapter.

First, a little about the RCA standard itself. Each plug is responsible for its own type of signal and is colored in its own way. Yellow - video, white - left channel or mono audio, red - right audio channel. For greater convenience, the connectors are also painted on the devices. That is, plugging the wrong plug in the wrong plug is quite difficult.

It is now possible to connect tulips to HDMI or VGA without any problem. Many electronics stores have a wide range of adapters. You can also take a look at the most famous Chinese online store.

How to connect an old TV to a computer

There is probably no universal recipe for how to connect an old, analog TV to a computer. But we'll tell you the general algorithm now. First, you need to carefully study the TV and determine what kind of connectors it has. If there are several of them, it is necessary to determine the most modern and functional one.

On an old TV, most likely, you will find something from composite, RCA or tulip, S-Video, as well as SCART. So the whole connection process will be just the selection of the required adapter from standard to standard.

How to wirelessly connect a computer to a TV

The development of wireless technologies has also affected televisions. This has proven to be so convenient that Wi-Fi has now been incorporated into almost every model in the last few years.

How to connect a computer to a TV via Wi-Fi

Before connecting via wireless networks, you need to make sure that the TV has Wi-Fi support. In fact, the connection process itself is a connection of the TV to a common wireless home network, that is, to a router, then it is necessary to ensure that a media server is installed on the computer, which would share content with the TV. This is the easiest way to connect a TV to the Internet via a computer indirectly.

For example, it will look like this: go to the settings, on the remote control you can do this by clicking Settings, look for the "Network" section, then find the "Network Connection" item, select it and click "Configure Connection" in the next window.

TV will offer to choose our network from the list of available networks and enter a password for access. Naturally, before connecting the computer to the LG TV, the network on the router must be configured. Then it remains to create a media server on the computer, or, in other words, several shared folders, with which the TV can access the PC content.

WiDi / Miracast connection

Miracast technology and its analog from Intel - WiDi allow you to transfer media content directly via Wi-Fi without various intermediaries. Moreover, this can be done both from computers and from mobile devices. Some Samsung TV models have their own implementation of the technology called Screen Mirroring. Before connecting a Samsung TV to a TV, you need to make sure that this technology is present in it, since not all models support it. It is also worth remembering that the PC's wireless card must be free.

How to connect audio from a computer to a TV

By default, HDMI is capable of transmitting audio out of the box. That is, any more or less modern TV and PC can be connected without additional tweaks. With all other situations, you will have to look for alternatives. For example, a PC has VGA, and a TV has RCA. An adapter that would have, on the one hand, both VGA and sound, and on the other, all three RCA plugs, is a rarity. Therefore, you will need to find a VGA - RCA video adapter, and then separately for sound - 3.5 Jack - RCA. In general, now you can find both any adapter and more unified adapters with a set of connectors and plugs. The enterprising Chinese are especially advanced in this.

Dedicated 3.5 to RCA audio adapter

How to connect a TV to a laptop - the nuances

In fact, it's as easy as shelling pears. Any laptop, even an old one, contains at least VGA. Newer ones already have HDMI, which greatly simplifies the whole process. The whole difficulty lies only in finding the right adapter or adapter, which, if necessary, could transfer not only video, but also sound.

There are several situations where you need to connect TV to computer... Fortunately, modern TVs fully support this feature. But first you need to clarify in what specific capacity you want to use this bundle. Well, for example, you can just use a TV instead of a monitor. by wifi or by cable... This method is the most common, and when a user enters a query into a search engine on the topic of our article, then, as a rule, he needs this information.

How to connect a TV to a computer instead of a monitor?

What for? Quite often there are situations when it is advisable to have a larger monitor. For example, if you are playing a game, it is much more enjoyable to watch everything on the big screen. Or if you want to watch a movie from the Internet directly on the big screen, and your zombie doesn't support an Internet connection.

There is nothing complicated in connecting a TV to a computer, in general, not, and even a child can cope with this. The main thing is to know what input connectors the TV has, which we want to use as a monitor.

Analog or digital?

Without going into details that an ordinary TV consumer does not need to know, I will say that there are two types of transmission and reception of a broadcasting signal - analog and digital. With analog, the transmitter station sends out a signal from electromagnetic waves, which cause vibrations in the antenna of the receiver, that is, the TV, and give an idea of ​​what picture and sound to show on the screen.

With digital at the transmitter station, this signal is encoded into a digital code, which is received and recognized by the receiver. Thus, it turns out that the analog signal can arrive with distortion caused by other waves. Digital, if any, comes in an absolutely pure form. Also, an analog signal can be received by any device that is configured to work on the same principle as the transmitting station. Digital, however, is reliably protected by a code that cannot be recognized if your device does not have an exact key to it.

As a result, what do we have in practice? Analog broadcasting is central television, which is caught by everyone, even the most ancient televisions. Digital - high quality video that is perceived only by adapted devices.

So, when you want to know how to connect a TV to a computer as a monitor, that is, there are three ways - either through cables with analog connectors, or with digital ones, or from digital to analog through a special converter, since you cannot directly connect a TV through a computer. ... All these difficulties occur due to the fact that your TV may not have the only connector that is on your computer. And although modern models have most of them and some kind of direct connection should definitely come up, sometimes it happens that you still have an old monitor or computer where something is missing.

It is also necessary to separate the connection of the video signal and audio - in most cases they occur separately.

How to connect a TV through a computer - video signal

1. VGA (or D-Sub)

   Almost all monitors, televisions and computers have this output for connection through a computer to a TV set, with the exception of perhaps only some inexpensive models of laptops and netbooks. The standard, the oldest analog way of connecting the monitor to the system unit.

   

2. DVI

   A more advanced connection that works with both analog and digital monitors. Has its own subgroups:

   • DVI-D - works with digital connection only
   • DVI-A - analog type only
   • DVI-I - with both types

   Very often you can see how a DVI-A or DVI-I cable is connected to VGA through an adapter.

   

3. S-Video

   Another popular connector. Basically, it is present on non-computer equipment, therefore, to connect a computer to a TV via this port, you will need an adapter, or a converter, if we are talking, for example, about VGA.

   

4. RCA

   It has long been an outdated connector, which, however, is found on all versions of TVs and is the most convenient for self-crimping at home. After all, it is enough to simply buy ordinary single-core coaxial cables and connect them to the commonly sold nozzle plugs. Consists of three wires - two audio and one video. It is also called for the characteristic color of the tulip connectors. In the absence of appropriate connectors, it is easy to use adapters or converters to s-video or vga.

   

5. Scart

   A modern connector that allows you to achieve high picture quality and transmit simultaneously video and audio signals. All modern TVs are equipped with it, but the computer may not. In this case, it is also advisable to use an adapter, for example, to VGA, RCA or S-Video with an additional audio cable.

   

   

6. HDMI connection

   Another modern connector for connecting a TV to a computer with simultaneous transmission of high quality audio and video. Modern computers and laptops have HDMI connectors, but if you have to connect a remote monitor, then a long cable will be very expensive and it will be more expedient to connect to it with other types of cables. You can also use a DVI-I adapter. But organizing an adapter from the HDMI to VGA connection will not work, since through HDMI - the signal is digital, and VGA is analog. To do this, you need a special video converter that converts a digital signal into an analog one. A special feature of this connector is the simultaneous transmission of audio and video signals.

   

7. There are a few more new, but still exotic connectors for connecting a computer to a TV and monitor. Such as UDI and DisplayPort. However, only a few companies have announced their support so far, so you can rarely get caught.

   

Despite the variety of adapters, it is better to use the same connectors on both devices for minimal losses in the quality of the video image. Most likely, of all this variety, at least one method will coincide. If, nevertheless, you need an adapter from one standard to another, then do not rush to buy adapters.

Consult the seller, telling him exactly from which connector to which you need to recode the video and what exactly is needed for this. In some cases, simply adapters will be enough, in others, special converters will be needed.



How to connect computer audio signal to TV?

This is about video transmission. The sound from the computer to the TV is connected using a cable, which has a standard computer MiniJack connector on one end, and two tulip audio (RCA) for stereo sound on the other.



Or by inserting an adapter for tulips into the audio output of the computer. In this case, again, you can easily make tulips with your own hands.



On a computer, one end that a MiniJack (a regular plug of standard headphones) plugs into the jack next to which the headphones are drawn. It is usually green in color.



And on the TV there are two entrances for tulips, usually red and white (or black) colors.

How can you connect a computer to a TV in practice?

Now let's take a direct look at how the connection takes place using one of the cables. Let's take the simplest and most modern option - an HDMI cable, which will allow you to simultaneously transmit sound and picture to your TV. This connector is present on all TVs released in recent years and is very often found on laptops and modern video cards in computers.

We connect the computer with a cable and a TV cable through the appropriate connectors.



We take the remote control from the TV set and press the "Input" button, where we select HDMI as the signal source. Automatically video and audio signal will be captured from your computer and an identical picture will appear on two screens.



If your computer does not have HDMI, you can use one of the other types of cables, but you will have to separately pull the audio and video. For example, for video, the most popular is the old VGA connector, which is present on very many devices, or again, use an adapter. And audio through a regular tulip. Or use the adapters mentioned above. In this case, already in the TV as a source of audio and video, you will need to indicate those connectors that you used.

There is a situation when the computer has only a DVI digital output, and the TV has HDMI, how to connect them in this case, because DVI is not intended to transmit sound? There is a way out, but it does not always work - you can try using a dvi-hdmi adapter connected to your computer. And already connect the hdmi cable to it and stretch it to the zombie box. At the same time, to transmit sound, you need to transfer the audio signal to a similar video card connector on the motherboard from the built-in S / PDIF sound card connector (if there is one, of course) through the internal cable so that it is also fed to the DVI output. I repeat - this option may not work on all models of motherboards and video cards, so it's better to choose the simpler methods.



How to mirror screen from computer to TV via wifi on Windows 7 or 10?

The output of the computer screen image to the TV can be realized not only via various types of cables, but also via WiFi. There are several ways to do this.

• Intel and Windows 10 computers already have a built-in feature called. With its help, it is easy to duplicate the computer screen to the TV via a wireless signal without third-party software.
• Another way is to use. To do this, you need to install a separate one on the TV. And on the computer - an application with which it will work. This option is suitable for any operating system, both Windows of all versions and for.
• Finally, there is another device specially designed for this type of connection -. We will also talk about this in another article.

These are the ways to connect a TV to a computer to broadcast images from it instead of a monitor.

When the computer screen is not enough to meet all the needs, then a good old friend comes to the rescue - the TV. Well, not very old, "Rassvet" is not suitable for these functions, but modern plasma panels are quite good friends with a computer. And then it will be possible to launch a game, your favorite movie or music (although why a big screen for music?) On a wide plasma.

It seems that it is very simple, but in the process, many face difficulties, and on the Internet they ask Google how to connect a TV to a computer. Fortunately, the search engine knows the answers to all questions. And this problem also has several solutions.

HDMI allows you to better connect your PC to your TV. Through this cord, you can transmit both a high-quality picture and even sound. The TV and the system unit panel must have a special connector with a height of 4.5 mm and a width of 14 mm. To make the connection, you need a wire with an HDMI plug at each end.

Some models of video cards are equipped with a mini-HDMI input, so you also need a special adapter from the standard version to the mini. This adapter should come with a video card, so you should look for it in old boxes. If it is not there, then the purchase will not be a problem, any computer store or point on the market sells such a product at a low price.

By the way, about the price. Materials, color and other features of the cord and adapter do not affect the quality of image transmission, but only the cost of the goods. Counselors may argue otherwise, but they are not. Therefore, buying a piece of cord for several hundred "evergreens" is not worth it, cheap options for 5-15 dollars will also perfectly fulfill their function. Digital data will go through the cable, which is not affected in any way by various interference.

How to connect a TV:

DVI cables

First, you need to remember that DVI connectors, and therefore cables, are different.

Therefore, you should find out which specific type is needed, and only then buy it. Each option has its own characteristics and characteristics:

• DVI-D. This kind transfers digital signals from the video card of the unit to the TV. Data is transmitted promptly and with high quality;
• DVI-I. Such a cable is rightfully universal, because it provides both analog and digital transmission of image and sound. The choice of this option will be the best solution, although it costs a little more;
• DVI-A. Most experts advise against buying this type of cable. Its peculiarity is that data is processed from digital to analog, and only then appears on the screen and in the TV speakers. These processes greatly affect the image quality.

The problem of connecting the TV to the computer can be solved with a VGA cable. The connector for this cable is standard and is present in all video cards for transmitting an analog signal. If there is a connector for it in the TV, then the connection will not pose any problems. To do this, you need the actual VGA cable and audio cable.

But before you start using this method, you need to check if the TV supports high definition. The fact is that many TV models can only receive low-quality signals via a VGA cable. If everything is in order and high resolution is supported, then you can start connecting:

• Disconnect the equipment from the mains;
• Connect a VGA cable to the corresponding inputs on the TV and computer;
• The PC audio output must be connected to the audio-in socket on the TV. This requires a special audio cable;
• Turn on TV and PC power;
• Make settings for the computer and TV (similar to the settings from the HDMI connection);

RJ45 - network connector

To make such a connection, you need to match the TV to two parameters:

• He must have a media player (to put it simply, he must be able to play music, videos and images from a flash drive);
• It must support DLNA technology and its block must contain an RJ45 network connector;

DLNA is a special technology that allows the exchange of information between the TV and other devices in real time. Thanks to this system, it is possible to play files directly from the hard disk without transferring them to other media. You can find out if there is such a function in a particular TV model from the instructions for it or on the manufacturer's website.

To connect your TV to your computer, you need:

• Make a physical connection;
• Download and install a special program (it's free);

The first stage involves connecting directly or through a router. It is not advised to use a router, because then it has a heavy load, which will lead to a loss of performance. In order to connect without a router, you need a "Crossover" cable of the "Twisted pair" type. The crimp on the cord must be crosswise. You will also need to make changes to the IP settings.

A configuration like this would work:

If the computer contains two network cards, then you only need to configure the one that connects to the TV.
You also need to download and install the Home Media Server application. After that, you need to change certain settings (when the cable is already connected and the equipment is turned on):

To view the files, the equipment must be turned on, the Home Media Service program must be running, and the source of media files must be set to Ethernet (Lan). This will open a file explorer that will allow you to view the required files with the remote control.

In contact with

A huge number of moviegoers prefer to watch high quality films on large screens. In order not to waste money on an expensive Blu-ray player, many people connect the TV directly to their computer.

You will need

• HDMI-HDMI cable, DVI-HDMI adapter.

Instructions

To connect the TV to the computer system unit, you can use several different options. First, select the port on the TV to which you will connect your PC's video card.

There are several main connectors that carry a digital or analog signal. The first type includes DVI and HDMI ports, the second - S-video and VGA.

If you are the proud owner of a modern powerful computer, then you are in luck. Most likely, your graphics card is already equipped with an HDMI port. In this case, you just need to purchase an HDMI-HDMI cable and connect the computer to the TV.

Relatively old models of video cards have two connectors: VGA and DVI. Especially for such cases, they came up with a DVI-HDMI adapter. Connect it to your graphics card, plug in an HDMI to HDMI cable and connect it to your TV.

Consider an important point: for many models of video adapters, the DVI port does not transmit sound, unlike the HDMI connector. In this situation, you need to purchase a cable with an audio jack (3.5mm) at both ends. Connect it to the Audio Out port on your sound card and the Audio In jack on your TV.

It is not enough just to connect the TV and the system unit together. It is also necessary to adjust the image parameters. Turn on your computer. Right click on the desktop. Go to Screen Resolution. At the top, you will see the icons for the two displays. Choose the one that symbolizes the TV.

If you want to expand the work area, then select "Expand Screens". If you need to get an identical image on both screens, then select "Duplicate these screens".

Not all video card models support dual channel operation. You can find out about immediately after Windows boots: only the background picture of the desktop will be displayed on the TV screen. In such cases, click on the icon symbolizing the TV and select "Make this screen the main one."

Advice added on October 13, 2011 Advice 2: How to connect a processor to a TV To set up a TV connection to a stationary computer, several nuances must be taken into account. This mainly concerns the choice of the type of connection of the two above devices.

You will need

• - VDI-HDMI cable.

Instructions

Examine the connectors located on your TV and system unit. Determine the appropriate types. Remember that not only identical channels can be connected. We recommend using digital data channels such as VDI and HDMI to get the best picture quality on your TV.

Select the connectors through which you will connect the TV to the system unit. Usually, the DVI port of the video card is connected to the HDMI connector of the TV. To do this, you need a DVI-HMDI adapter and HDMI-HDMI cable. Connect the TV to the PC video card with these devices.

Switch on both of the above equipment. Be sure to open the TV settings menu and select the desired port from which the signal will be received. Now proceed to configure the settings for your computer's video adapter.

If you are using a TV without a monitor, then you only need to adjust the screen resolution. In Windows Seven, right-click on the desktop and select Screen Resolution. Set the appropriate resolution and click the "Apply" button.

If you want to use the TV and monitor in sync, then complete the detailed settings. First, determine which of the devices will be the main one. Click on its graphic in the "Screen Resolution" menu and activate the "Make this display the primary" option.

Now select the options for the second display. Select the Duplicate Screen option to display the same image on your monitor and TV. Select the Expand Screen option to use these devices for different purposes. This will allow different programs and applications to run on both displays at the same time. This feature is most commonly used at home.

How to connect a processor to a TV - printable version