How to change the interface from a taxi to a regular one. New interface "Taxi

1C: Enterprise Accounting, revision 3.0 - the first version of the configuration, which provides the ability to customize the interface. On the one hand, this feature compensates for the cardinal differences in the appearance of the new version from the previous one - 1C 8.2. On the other hand, it gives users flexible options for customizing the workspace, focusing only on existing needs, their own convenience and individual taste.

It is worth noting that during the existence of the 3.0 edition, which works accordingly on the 1C: Enterprise 8.3 platform, the interface has undergone several changes. In particular, the number of available interface options has been increased, including:

• Standard (as in previous versions of 1C: Accounting 8)
• Taxi

Standard

When version 3.0 was released, its interface was identical in structure to version 8.2, but different in design: the names of the sub-items of the upper horizontal menu were expanded, and icons were added.

A visual comparison of revisions 3.0 and 2.0 shows that the interface structure has remained unchanged.

Clicking on a menu item brought up a drop-down list, and in the new version, the sub-items are displayed as tabs.

Since this type of interface was the first, it remains the most popular. You can change its structure by going to "Administration-Program Settings" - item "Interface".

allows you to access a submenu without closing the active window. *

* Horizontal menus:

• Section panel, located directly below the main menu;
• A bar of actions or commands available in the selected section.

The vertical navigation bar displays the structure of the section's content.

Using the sub-menu items, you can customize the content of the panels and their display at the request of the user.

(next item) allows you to add and remove sections, as well as items of the main horizontal menu, up to its complete removal.

allows you to open additional windows under the main menu - standard reports, information, contacting technical support (horses essentially duplicate the vertical panel).

allows you to add / remove submenu items, which previously could only be done with the participation of programmers.

Taxi

In the Taxi interface, the sections panel is initially on the left.

Implementation of customization of panels in this interface is carried out by dragging and grouping panels at the request of the user in a special editor window.

The panel editor window allows you to group by drag and drop, add and remove panels such as the section panel, open panel, toolbar *, function panel of the current section, favorites panel, history panel.

* The panels at the top of the editor window are currently active.

Section sub-items are configured (vertical sections panel) after their activation (the sub-item settings button is in the upper right corner).

The action bar customization window allows you to add and delete sections, up to complete deletion.

A nuance of the interface: selected sub-items are marked with asterisks

* External improvements are often added here

Similar to the interface of revision 7.7

The menu structure is very similar to the standard version.

The 7.7 customization option is located on the top right panel (down arrow), which allows you to add and remove buttons. It is active on all interfaces.

We customize "Taxi" for ourselves in 4 steps (1C: Accounting 8.3, revision 3.0)

In this article I will talk about how to make work in the new interface 1C: Accounting 8.3 "Taxi" really convenient and comfortable for an accountant.

Follow just 4 steps to customize the Taxi interface for yourself and enjoy all its benefits. If you are still in doubt: to switch or not to switch, then my opinion is unequivocal - to switch. Taxis are better. Taxis are more convenient. And it is very easy to readjust to it.

If the "Taxi" interface is not yet enabled for you, turn on:

Select the "Taxi" option and click the "Restart" button:

Then necessarily go to the "Administration" section, the "Interface" item:

And here we also set the "Taxi" option and press the "Restart" button again:

Step # 2. Setting up the section panel.

Here, select the sections on the right side of the window that we rarely use or do not use at all and press the delete button:

Most often, such "unloved" sections are "Manager", "Production" and "OS and intangible assets":

And finally, in the lower left part of the window, set to show "Picture and text", if with pictures it is easier for you to find sections:

Click OK and the section panel will transform:

Result: only the necessary remained, pictures appeared.

Step # 3. Customizing the open windows panel

In the new interface, you cannot switch between open windows, because the open windows pane is hidden by default. Let's display it.

After dragging, click OK and now the windows we open will be displayed at the bottom of the main 1C window:

Result: at the bottom of the main window are displayed directories, documents, magazines and so on that we open.

Step # 4. We turn on the "All functions" menu.

A very useful feature when you tried to find some report or document, but you could not do it through the section panel. In this case, the "All functions" menu will help you out from which you can open all reports, documents, reference books, etc.

This option is hidden by default, but it is easy to show it.

Check the box "Show command All functions" and click OK. Now any report, document, reference book, journal or processing can be selected like this:

Result: it became possible to open reports, documents, journals, directories and processing that could not be found in the main menu of the system.

We are great, that's all

By the way, for new lessons ...

Sincerely, Vladimir Milkin(teacher

If the release of your configuration is released later, then you can control the enabling / disabling of this interface in the 1C 8.3 user mode. Let's see how to do it.

1C Enterprise Accounting, ed. 3.0

If the appearance is not set - "Taxi", then set the switch. Then you need to restart the program:

1. Section Administration - Program settings - Interface:

In the "Use interface" field, set the switch - "Taxi":

After selection, you need to restart the program.

1C Salary and Personnel Management, ed. 3.0

1. Main menu - Service - Options:

1. Set the appearance - "Taxi":

The settings are applied for each user individually:

1C Trade Management, ed. eleven

1. Main menu - Service - Options:

If the appearance is not set - "Taxi", then set the switch. Next, you need to restart the program:

The settings are applied for each user individually.

1. Section NSI and administration - Setting system parameters - General settings:

In the general settings of the program, in the "Use interface" field, set the switch to the "Taxi" position:

The settings are applied to all users at once.

General command line parameters for starting an infobase

There are also commands that allow you to run the program in the desired interface mode. They are written in additional startup parameters:

/ iTaxi- "Taxi" interface mode:

/ itdi- interface mode using bookmarks:

/ isdi- interface mode using separate windows:

New interface of Taxi 1C 8.3 improves the usability of the program

• Taxi interface is more compact (collapsible groups have appeared):

• Fast input by line and the ability to create a new item in the drop-down list of the input field:

• Ease of navigation: History, Favorites, following a link.

History panel:

Favorites panel:

• The ability to customize the workspace to your liking.

Panel editor:

• Ability to customize your desktop:

All this and much more you can learn from the courses:

• Olga Sherst and Irina Shavrova: 1C: Accounting 8.3 ed. 3.0 ""
• Olga Sherst: "" OSNO and USN
• Elena Gryanina:

How to work in the “Taxi” interface, how to customize the workplace “for yourself”, setting up the Favorites section, how to carry out full-text search, techniques for working with magazines, the “select” button in documents, transferring links to documents, verification and other features in the new interface - all this can be found in our video:

How to check a counterparty directly from 1C, how to determine the tax burden in the context of taxation systems in the program and set up an accountant's calendar so as not to miss reporting deadlines, see the second part of our video on working in the new interface:

The 1C taxi interface is a new word in the development of the 1C: Enterprise 8.3 technological platform. The new face of the program is adapted to the standards of web applications. The developers have performed a large number of usability tests and have seriously reworked the mechanisms for interacting with users. The program now resembles a well-made website with a friendly interface.

Now the interface can be fully customized by arranging the panels as you like:

Configuration forms of a managed application (8.2 and 8.3) are able to switch to Taxi without additional modifications, literally in one click of the mouse. However, the new taxi interface turned out to be larger, and standard applications from 1C, as a rule, are not designed to work in this mode. At the moment, 1C and its partners are actively translating and adapting configurations for innovations.

Transfer to Taxi

To enable or disable the Taxi interface, simply set the "Interface compatibility mode" value to the "Taxi" mode in the configuration properties.

How to remove the "Taxi" interface and return to the previous view of 1C: Accounting 8.3 (version 3.0)

Unfortunately, starting with the 3.0.52.42 release, it is no longer possible to return to the previous accounting interface. Now only a taxi.

So, the next update from 1C. Starting with release 3.0.33.15, 1C: Accounting 8.3 finally received the "Taxi" interface (read more). And although the ability to work with the previous interface has been preserved - "Taxi" after the update is turned on by default in some cases.

It will take some time before articles about working with the new interface appear. You will also have to wait while the programmers adapt their processing, which may not work quite correctly in Taxi now.

Therefore, the most correct step is to abandon the use of "Taxi" at first and return to the previous interface. This is not difficult to do.

1. Go to the "Administration" section.
2. Now in the main window find the "Interface" item.
3. Select "As in previous versions of 1C: Accounting 8".
4. It remains to click the "Restart" button.
5. The program will ask for permission to restart, select "Yes".
6. Wait for the restart. Ready!

The same thing in the pictures:

Best regards, (teacher and developer).