How to set up smartphones and PCs. Informational portal
  • home
  • Windows 10
  • How to quickly backup an Android device. All possible ways

How to quickly backup an Android device. All possible ways

Good afternoon, dear readers. Read in the article how to make a backup on Android without root rights, or with them, what is a backup. Useful programs that will help you make a backup copy.

The Android operating system is fraught with a lot of possibilities. The most useful of these is the backup. Or backup - this function is also called that. If a failure occurs or you lose your smartphone, then you can recover almost all the information. You just need to remember to regularly backup your Android system. How exactly? This article will try to answer this question.

Backup types

To begin with, let's figure out what exactly is meant by the word "backup". Usually this is the name of copying certain files for their subsequent recovery. You can copy data to the following locations:

  • microSD card or permanent memory- you copy the data to a separate file or archive, and then move it somewhere yourself;
  • A computer- backing up Android firmware or copying some third-party files to a PC is usually done via a USB cable or via Wi-Fi;
  • cloud services- in some cases, the backup can be automatically uploaded to Dropbox, Google Drive and other similar sites.

What exactly can be copied? This is a more serious issue. The operating system itself, by default, uploads data about your contacts, call log, messages and much more to Google servers. Usually this is enough for any user.

Third-party applications can copy all kinds of media content. For example, it can be downloaded videos or . In this case, often you yourself specify the folders with the necessary files, so there can be no error - absolutely everything will be copied.

There is also a backup on Android of the application settings. It works correctly, however, not on all smartphones. And not all programs allow you to copy their settings. But you need to be aware of this possibility.

Finally, there is a full backup on Android. This is when the current state of the firmware is copied - completely, from settings to some files hidden from the user. This is done the most difficult and often in a special way. Yes, and this is required only for those who regularly experiment with their device.

Backup on Android: Do I need root rights?

Some files cannot be copied without . The fact is that the most serious settings of the operating system are laid deep in hidden folders. As such, the user does not have access to reading them. Root-rights solve the problem - they provide access to copying absolutely any files.

But most often no root rights are required. For example, messages, contact book and other aspects of the Android operating system can be backed up without them. Moreover, this process is often carried out automatically - you may not even know about it.

Backup using operating system

Android almost from its first versions learned to copy user information to Google servers. But at the same time, only basic information is copied - messages, call log, content of services from the Google Play series, calendar, contacts and documents. If this is enough for you, then get ready to do the following:

  1. Go to "Settings".
  2. Go to the "Accounts" section.
  3. Select Google.
  4. In the window that opens, activate the switches next to all the items that you consider necessary. Please note that there is also an item "Application data". But it does not work in the best way - when reinstalling the operating system or some kind of system failure, many programs will still start working from scratch. But the installation of all applications will occur automatically.

Don't forget that you need a Google account for this sync to work. However, without it, you can only implement an Android backup on a computer. For the rest of the actions, special applications are required, and they need to be downloaded from, where you cannot get into without the corresponding account. Of course, there are all sorts of tricks like downloading programs from third-party resources, but this is a topic for a separate article.

Branded programs for backup on Android

Now many smartphones come with branded shells created by the manufacturer. An additional backup can be implemented in them - the data is sent to the server of the device manufacturer. For example, let's look at how to make a backup on Android installed on a Samsung smartphone or tablet:

  1. Go to "Settings".
  2. Enter the "Cloud and Accounts" section.
  3. Click on "Backup and Restore".
  4. Select "Backup Settings".
  5. Here you can enable automatic backup, which will be uploaded to the server once every 24 hours. You can also select the types of information sent to the server here. Most often, Samsung complements Google in this. For example, this way you can regularly copy desktop shortcuts, the contents of the Phone application, a list of all installed applications, almost all device settings, and much more.

The best backup programs for Android

Not all people are satisfied with the standard features of the operating system. Some users are looking for information on how to backup on Android using special utilities. They seem to trust them more. In addition, such programs allow you to send a backup to your favorite "cloud", while the operating system offers only Google servers and some other smartphone companies.

Without root rights, third-party programs do about the same thing as Android itself. They are able to recopy contacts, messages, but nothing more. But if you grant superuser rights to such a program, then everything will change. The breadth of its possibilities will increase significantly. The most popular applications and backup tools are the following:

  • Titanium Backup ;
  • SP FlashTools;
  • (CWM).
Titanium Backup

And these are just the three most popular ones! You can find at least a dozen other programs of this kind on Google Play. In the meantime, let's figure out how Android applications are backed up using Titanium Backup. It is the most popular backup software. It is free to use, although some useful features are available only in the extended version. It doesn't cost too much though, $5.99 is a reasonable price to pay for keeping your information safe.

So what does Titanium Backup copy? It seems like absolutely everything! If you give the application superuser rights (without them, it simply does not work), you will get a bunch of possibilities.

  • Firstly, you can regularly copy the settings of all programs and games installed on the device. What's more, you can even copy their APK files!
  • Secondly, you can backup all the settings of the operating system. Absolutely everyone! This means you can experiment without worrying about system files.
  • Thirdly, although this does not concern our topic, Titanium Backup allows you to freeze user and system software. This is useful in cases where the device is provided to a child - so you can be sure that he does not accidentally install anything.
And how exactly to use Titanium Backup?

Everything is very simple:

  1. Install and run Titanium Backup.
  2. Grant the application superuser rights. Also, the utility may ask you to change some settings - for example, enable the ability to install programs from unknown sources.
  3. Click on the button located in the upper right corner. It has a checkmark on it.
  4. Here is a list of program features. Select the desired function and click on the "Start" button next to it. For example, you can select "Make r.k. all user software and system data." In this case, absolutely everything will be copied.

The backup will be in a separate file. In the application settings, you can specify where exactly to save the backup. It is best to save it to a memory card. In the PRO version, you can use Box, Dropbox and Google Drive. You can also set up an automatic backup - it will be created on a schedule. The paid version of the program can also compress files - in this case, they will take up less space in your cloud storage or on a memory card.

Backup of all Android firmware

And even Titanium Backup does not copy the entire state of the operating system. In this case, it just doesn't make sense. If you get a system crash and Android won't boot, then you won't be able to use the restore because you won't be able to run the app itself. Then how to backup Android firmware?

Developers from Google have implemented another method that works with .

Make sure the battery is at least 50% charged before proceeding with the next steps. Otherwise, there is a minimal risk of turning the device into a “brick”.

Different smartphones and tablets may use a different way to visit the Recovery menu. In any case, you will need to turn off the device completely. Then the following actions are usually performed:

  1. It is necessary to hold down the volume up button;
  2. Next, the power button is pressed.

Some devices use different buttons. For example, on devices from Samsung, the Home button can also be used. Please note that all buttons are released after the green robot with an exclamation mark appears on the screen. Otherwise, a normal reboot will occur. Well, in the Recovery Menu you need to find the item "Backup and Restore". Navigate through the menu with the volume buttons (the touch screen does not work here) and press the appropriate item with the power button. Next, in the same way, click on the “Backup” item. Then it remains only to wait for the end of the process.

Copying all the firmware files can take from five to ten minutes - the exact value depends on the processor power and the workload of the operating system.

When the process is complete, click on "Reboot now". This will reboot the device.

Unfortunately, this method may not work on some smartphones. Almost always, the “Backup and Restore” item is present in the custom Recovery menus. If you have never flashed a device, then you may simply not have this item.

For Windows and Mac OS X operating systems, many programs have been written that serve to receive data from a smartphone. Software developers who regularly test and experiment with portable devices typically use adb. This is a special program that serves to debug a smartphone or tablet. It has practically no interface, and all actions are carried out by entering the appropriate commands. But before that, you need to enable USB debugging on your smartphone. This is done as follows:

  1. Go to "Settings".
  2. If you've never enabled USB debugging, then you'll most likely need to visit the About Phone section first. Here, click on the "Build number" item several times until you get a message that you have become a developer.
  3. Now go back to the main settings menu and click on the "For Developers" button.
  4. Turn on the switch next to USB Debugging.

When the checkbox is activated, you need to connect your smartphone to your computer and run the ADB program (its exe file). In fact, only with the help of this utility you can create a backup without rooting. For the most complete backup, you need to enter the following command:

$ adb backup -f "D:\Backup\ADB-2017-08-15.ab" -apk -shared -all -system

If you don't need APK files, then you don't have to write the corresponding key. Of course, the path and name of the backup file may be different - we have indicated only an example.

If you only need to transfer contacts, messages and other information to your computer, then you can use more understandable programs. For example, it will allow you to make such a backup on Android application MyPhoneExplorer. This computer application has a clear Russian-language interface, it does not ask for any text commands. Therefore, it will not be difficult for you to create a backup copy on your own. We will just say that this program also requires the activation of USB debugging.

Summarizing

Now you know what a backup is on Android. And from now on, you will have no difficulty creating it. In conclusion, we only note that ordinary people need to create backup copies only in order to then restore the most important information in case of loss or breakdown of the smartphone. And for this, the usual synchronization with Google, which we talked about at the very beginning, is enough.


Did you know that before getting root or performing any experiments with a mobile device, you need to read the information on the topic: “how to backup Android”.

A considerable percentage of mobile device users are interested in unlimited privileges (root-rights) and all sorts of experiments with software.

They get them after root.

As a result, these users often begin to look for information on what to do when it does not load, this or that error appears, how to install the system application back, etc.

It's good if the device will malfunction or boot in a circle, but it's much worse when it turns into a "brick".

Even in the latter case, non-functioning software can be brought back to life simply by rolling back the software.

We will consider how to make an Android backup within the framework of this article, and we will touch not only the firmware, but also programs, photos, and any other information.

Content:

Android developers offer a basic set of backup functions, which are carried out automatically.

In the device parameters, you only have to check the boxes next to the necessary items, and all the required information after resetting the smartphone or its firmware will be restored after.

Backup Android via ADB

The first, in addition to the above, a method for solving the problem is also proposed by Google. It is far from the most convenient, but it has a place to be.

So, to create a backup, you should:

The instruction manual for the utility is as follows.

  1. We call the application and click on the item "Backup".
  1. Select "ADB Backup" to back up information on a smartphone / tablet.

Rice. 3 - Starting the reservation in the program

  1. On the gadget, tap on the icon "Create a backup...".

Rice. 4 - Confirm the backup

Enter a password, if required, or leave the field for encrypting information empty.

  1. We are waiting for the files to be archived.

To roll back the operating system with all applications and related information, do the following.

  1. Connect the device via USB.
  2. Launch ADB and select "Backup".
  3. In the next window, click "ADB Restore".

Rice. 5 - Recovery window via ADB tool

  1. On the device, tap on the icon "Restore data" after entering the password if the backup was encrypted.

Rice. 6 - Confirmation of resuscitation of data on the device

The main disadvantage of Google's Android backup methods is the lack of support for applications that are not in .

Yes, and with the convenience of work, a lot of questions arise, so it is easier to transfer your software, their settings and achievements through third-party programs.

We reserve only the necessary information

We will consider only a few programs highly rated by users. First on the list is Titanium Backup.

Titanium Backup

The utility needs no introduction, but root rights are required for its operation.

Its functionality includes:

  • backing up and restoring applications,
  • their freezing and complete uninstallation,
  • transferring programs to the SD card that do not support this by default,
  • automation of many processes,
  • work with multiple copies of the same application.

Titanium Backup supports call history, SMS and MMS, data on wireless access points to the Internet, address book, calendar information and can synchronize data with cloud services.

The most common use of the utility is to transfer settings and personal information between devices or firmware.

First of all, we fulfill the following requirements.

  1. We free up the amount of memory necessary for backup on the SD card or internal memory of the device.
  2. We get root rights.

Sometimes you may need to activate USB debugging, but this is extremely rare.

  1. Go to the menu of group actions by clicking on the icon with a checkmark in the upper right or call the command " Group actions" via the button "Add. Menu".

Rice. 7 - Titanium Backup Batch Actions Window

Here is a list of batch actions:

Rice. 8 - List of batch actions for backing up information in Titanium Backup

  • backup of all applications with their data;
  • copying only system software with settings;
  • combining the first two options;
  • creating a new backup without affecting the existing one;
  • deleting old backups;
  • updating the existing copy after the changes (SMS received, contact added);
  • analogue of the previous option, but related to third-party software (installed / uninstalled the application, changed its settings);
  • combining the two previous options;
  • the same as the 8th method, but with the inclusion of changes regarding system applications.

After clicking on the "Start" button next to the desired option, depending on the option, you will be able to select programs / games and data to be backed up.

Rice. 9 - Application selection interface in Titanium Backup

At the top right, click on the checkmark icon to launch.

The same menu of batch actions will help you to rollback if necessary, where the following operations are available:

  • restore only missing applications;
  • reanimation of all information contained in the archive about installed programs;
  • rollback only data related to system services and programs;
  • combining the two previous points;
  • replacement of new versions of programs and games with those contained in the archive.

Rice. 10 - List of batch operations for restoring software through Titanium Backup

Backup and Reset

You don’t have to spend money on buying Titanium Backup, smartphones / tablets already contain all the tools that allow you to protect yourself from data loss.

In the settings section "Backup/Reset" options are available for manual and automatic archiving of applications with all files, and other Google settings.

The backup will be stored on the servers of the corporation, and to roll back you will have to connect to a wireless network.

Rice. 11 - Device backup and reset window interface

After flashing the device or resetting its state, the system will offer to download the data stored on the remote server.

Android Backup - Full Backup

Today I decided to tell and show one of the many ways to make a full backup of your phone or tablet. This action will take a few minutes of your time, but in the future it can save you from losing important information and your time. In order to make a full backup of a phone or tablet, Root rights must be installed on it, you can find out how to do this by clicking on the link in the video

Helium - App Sync and Backup

Unlike its competitors, Helium does not require root, although if rooted it will reveal its full potential.

For phones without superuser rights, you will need to install an additional Helium Desktop application on your computer.

Supports a large list of data, which does not include information about system applications, and they themselves even with root.

Some programs are not supported, they are displayed at the bottom of the software list, but Helium remembers and distinguishes between all the devices on which it was launched and the copies created for them.

Consider how to backup Android on devices without root.

  1. After starting the program, activate USB debugging in the gadget settings.

Rice. 12 - Enable USB debugging in the settings of the mobile device

  1. We launch the computer version of the software and switch devices.

Rice. 13 - The result of a successful connection - a green checkmark

  1. Go to tab "Reservation"

Rice. 14 - Action selection window in Hellium

  1. Uncheck the box next to the option "App data only", if we archive the programs themselves.
  2. Check the boxes for the required items.

Rice. 15 - Mark applications to add to the backup

  1. Click "Reservation" and choose a location to store the archive.

Rice. 16 - Selecting a storage location for the archive

  1. Click on the button on the bottom right.

Rice. 17 - Confirmation of the backup operation

After some time, everything will be ready.

Rice. 18 - Successfully completed operation window

To resuscitate files from the archive, go to the recovery and synchronization menu, select the storage, the required data and start the recovery process.

Rice. 19 - Select a backup storage device

Helium archiving data and applications without root on Android

How to quickly backup an Android device. All possible ways

multimedia files

The most valuable contents of most smartphones are private videos and photo collections.

If your phone is lost, stolen, or broken, even photos and videos can be recovered if you prepare accordingly.

There are enough offers for this in the Playmarket.

Google+

The program is included in the standard . It sends (automatically or manually) fresh photos to the cloud.

If the user wishes, they will be available on all devices, from which the user will use them in his account.

A bonus for providing personal information to Google will be automatic photo adjustments and GIF animations.

It is worth noting that storage is limited to 5 GB.

Rice. 20-Google+

Backup of all device software

All new phones have NAND memory installed, and this allows you to backup the firmware with all applications, their parameters and settings.

CWM and TWRP backups are supported, as well as third-party software.

ClockworkMod Recovery Console

Management in the program is simplified to pressing a few buttons, and to get a modified recovery, you only need to download the ROM Manager application, where the first item is the installation of ClockworkMod.

For some devices, there are other utilities, for example, for tablets from Acer.

Important! The charge of the device at the time of performing the actions should be 50 percent or more, and the best is to fully charge the battery.

  1. We turn off the device for ten seconds, so that the battery has time to switch to a passive mode of operation.
  2. Press the power button together with the volume down button.
  3. When the CWM menu appears, use the volume buttons to select "backup & restore".

Rice. 21 - CWM main interface

  1. We decide on the reservation option:
  • backup will make a complete copy of the system;
  • advanced backup will allow you to select partitions to save space on the USB stick and time to complete the operation.

When choosing the second option, you can specify partitions for archiving (system, boot).

  1. The next step is to select the backup to / sdcard option and wait a couple of minutes.

Restoration is done as follows: run CWM, select restore in the backup & restore item, specify the backup copy and confirm the action.

When finished, reboot using the reboot now option.

CWM Backup. Backup and recovery.

This backup method will allow us to return to the firmware that was saved before we decided to flash a new one. And you can also do it before dangerous experiments with system files, so that if something goes wrong, you can return the working firmware back.

Backup of arbitrary data

In addition to the powerful backup applications discussed above, there are a number of free, albeit less feature-rich programs.

All of them differ in the presence of support for saving information to a USB flash drive, appearance, interface language, support for various cloud services and work without granting superuser rights or with them.

Among the mass of utilities, Backup Your Mobile can be distinguished, although in its place there may be more than a dozen almost identical analogues.

Doesn't everyone have a Russian-language and so pleasing to the eye user interface. And the product was created by just one person.

The left side of the interface contains all the explanatory information that will not let the full kettle get bogged down in a couple of dozen options.

It is impossible to close this window, which causes inconvenience, and the absence of the option to select a directory / service for storing automatically created copies will also sadden.

Working with Backup Your Mobile couldn't be easier. We choose one of two operations: backup or restore (in this case, the first one).

Rice. 22 - Marking the data to be backed up in Backup Your Mobile

Then we determine the category of information that will be saved to the archive, marking the necessary items with checkboxes.

Rice. 23 - Selecting a backup location

Root rights are required to save system applications and passwords from wireless networks.

Restoration is carried out in a similar way: in the tab of the same name, specify the backup copy, select the items to restore and confirm the action.

Even if you do not intend to experiment with the device, it is highly recommended to keep a copy of the firmware and important information and periodically update it in order to save time when flashing the device, its failure or loss.

Nobody is immune from this.

Backup is a must. Do you love it or hate it; backup is essential.

Sometimes when we get updates, reset the device to factory settings, or even update a custom ROM, or in the worst case, the phone is lost, then a backup becomes a savior in case something goes wrong.

If you back up your data, you won't have to cry tomorrow. It is also true that data backup will not be done with a simple click.

Read below to know the top 10 apps to backup your Android phone without root.

So, we have developed a step-by-step guide to back up data on your device.

This is a one-stop guide for your Android phone or tablet.

1. Backup & Share Pro app

App Backup & Share Pro is a decent app for backing up your Android device data without having to root your smartphone.

This app offers you all the features like management/backup/restore/sharing software etc.

In addition, this application allows you to back up any data from the SD card or internal memory of the device. In addition, you can back up files from USB drives via OTG or any cloud storage.

One of the best features of this app is that it allows you to share any regular as well as system apps from your device via other sharing sources to other devices.

It also supports app sharing between supported apps like Facebook Messenger, WhatsApp, etc. You can easily save your data to cloud storage like Google Drive, OneDrive, Dropbox, etc.

In addition, this application allows you to automatically save all data or one by one. You can also uninstall an app on your device without going to the app manager, and give you the ability to rate or review any app directly from the Play Store.

It has a clean user interface and no ads, and it also includes 2-3 themes for customization.

2. Backup Your Mobile

Another basic solution for backing up all the data on your device is the Backup Your Mobile app.

You can use this app to backup system settings, SMS, call logs, MMS or any other data you want to back up.

You can store all this data on your SD card or any cloud storage like Google Drive, OneDrive, Dropbox, etc.

One tip: you should restore system settings or other system settings on another device running the same Android version to avoid any conflicts.

The app has a nice user interface, but looks dated compared to other apps. However, it gets the job done very smoothly and without lags.

3. Easy Backup - Transfer and restore contacts

Another app for backing up your contacts is Easy Backup - Transfer and Restore Contacts.

This application is specially designed to backup contacts on your device and save them in .vcf format.

You can backup all contacts with one touch and email them to yourself for further recovery.

The .vcf file is the most convenient contact backup and restore extension that all smartphones read.

On top of that, you also get support for backing up your data to any cloud storage, namely Google Drive, OneDrive, Dropbox, etc.

One of the best features of the app is that you can backup your contacts also offline, and you don't need an active internet connection.

In addition, it also supports Google, Exchange, Yahoo, Facebook, LinkedIn, Gmail, iCloud, Outlook, or any other provider.

The app is also available in 15 different languages ​​and also offers a clean user interface.

4.App Backup & Restore

Probably the best app for backing up your data, and one I personally use, is App Backup & Restore.

You can extract, share, edit any APK file in the app. In addition, it also offers to back up your app data either on an SD card or any cloud storage.

One of the best features of the app is that it allows you to batch backup your app or APK data.

You can also create your own app store and share apps with others through different platforms.

The app also allows you to automatically back up your data with accurate notifications. In addition, you can also schedule a backup to keep it on time.

With this application, you can also prevent the backup file from being deleted or accidentally deleted. Other features include a mobile security scanner, app updates, cache cleaner, and more.

5. Helium - App Sync and Backup

The Helium App - App Sync and Backup also doesn't require you to root your device to create a backup.

You can backup your app or data and sync it to cloud storage or save it to SD card.

It also allows you to sync app data from another device, even if they are not on the same network.

You can set up a schedule to back up your files and create a backup file of them in a timely manner to restore them in the future.

The application has a clean user interface and you can easily use this application to create backups.

The app allows you to enjoy its features without any annoying advertisements and allows you to sync your android files to android.

It also offers you automatic synchronization. It supports cloud storage like Google Drive, Box, Dropbox.

6.G Cloud Backup

It is made specifically for backing up device storage. You can manually or automatically save your MS messages, contacts, photos, videos, music, documents, call logs and various other files and create backups in the G Cloud Backup app.

What's more, it also lets you save some settings in many cases, which is nice. It backs up your data in an organized timeline so that you can go back to the exact time and restore your backup of your data from that point on.

Moreover, it supports seamless data exchange with all platforms from different sources.

it gives you 1 GB storage space which can be expanded up to 10 GB. In addition, you can also backup your camera, whatsapp, viber photos and videos.

This application allows you to protect your data with passwords and ensures secure data transfer. It also allows you to switch to a new device with a single click, as well as share your backup with a single click.

This app does not require any special permission or rooting of your device.

Resilio Sync is a new backup and restore application with a modern design.

It is one of the best cloud storage apps as reported by many users. One of the best features of the app is that instead of creating a backup and saving it to any third party cloud storage, you can save them directly to your computer.

This helps in improved security since no one but you has access to your data.

But in order to set it up, you need to spend some time and follow all the steps for it to work properly, but after that, you will love this cloud storage app.

There are no storage limits as you can save as much as your hard drive allows.

The app also allows you to create automatic backups of all your photos and videos. It supports all types of devices, from tablet, PC, Mac, NAS and even server from anywhere in the world.

One of the best ways to send and store your personal data in your own cloud storage i.e. on your PC hard drive.

8. Dropbox

As you all know, Dropbox is a cloud storage that allows you to save all your files and store them in Dropbox cloud storage.

You can access them from anywhere by simply logging into your Dropbox account. What's more, you can send, share, save, collaborate on any project, or work as a team with this cloud storage app.

You also get a real-time notification if someone changes or updates files. You can also convert whiteboards or receipts to PDF with the built-in document scanner.

It allows you to store all your backups, from photos, videos, files, data, contacts or almost everything, to cloud storage and access them anywhere.

You can set manual and automatic backups of your files very smoothly. The application offers a clean user interface and you will get what you want very easily.

9. Google Drive

One of the best cloud backup and storage options for your device is the Google Drive app.

In addition, you can also set permissions for your shared folder or file, such as who can view, comment, or edit.

You can use the built-in camera to easily scan paper documents and store them in the cloud.

You can also view any files stored in your Google drive very simply and without any network connections, i.e. offline.

Plus, you get up to 13GB of storage, which is enough to store any type of file.

10. All Backup Restore for Android

The last app on this list is All Backup Restore for Android. This application allows you to backup contacts, call log, SMS, apps, browser history or even calendar and restore them anytime.

This app stores all your data in Google Drive, making it easy for you to access it from anywhere in the world. You can back up any apps and restore them with one click.

In addition, this application also allows you to backup call logs and other data such as calendars to perfectly sync your new device with all the memorable dates from your old device.

It also has automatic backups of all your apps and other data, and you can install it manually as well.

You will be promptly notified that backups have been made or are in progress.

In addition, you can also set up a backup schedule for your data and sync it to your Google Drive account.

Conclusion

I hope you enjoy this article on the top 10 apps to backup your Android phone without root. Please let us know in the comments which app from the above list you find more useful, and also let us know any other app you know is good enough to be on this list.

10 Best Android Backup Apps | Introduction

Responsible people will remember the need to back up data on a desktop PC, but how many behave the same way towards their phones? Backing up data on an Android device doesn't seem like much fun, but only until the time when the real problem arises - because your phone can be stolen, you can install the wrong firmware, or just drop your device in a puddle, and then find yourself in a very difficult situation. . While Google automatically backs up your contacts, mail, and calendars, you can do the same with your own programs - both with their data and settings. Today we are publishing the top 10 backup apps for Android that will help keep your data safe.

10 Best Android Backup Apps | Helium App Sync and Backup

Cost: Free/$4.99

With this program, ClockworkMod has successfully made its debut in the field of data backup on mobile devices. Like its best counterparts, Helium allows you to back up programs, contacts, SMS messages and call logs, but unlike many, it does this without having to root your phone. Non-root users will have to install an additional program to make the mobile app work when connected to a PC, while those with root access can enjoy the benefits of Helium almost immediately. The paid version disables ads and includes copy-to-the-cloud functionality as well as backup scheduling.

10 Best Android Backup Apps | Holo Backup

Cost: Free

It's not even a mobile application, but a desktop backup program with Android 4.0 ADB functions, responsible for backing up programs and data on PC even without rooting the phone. Users can also backup SMS messages and can even backup over a wireless connection (although ADB backup over Wi-Fi requires root access). Holo Backup doesn't include any fancy frills like cloud backup or backup scheduler, so you'll have to do the backup process manually. But the bottom line is that Holo Backup is a practical and free app that doesn't need to be rooted.

10 Best Android Backup Apps | Ultimate Backup

Cost: Free/$2.99

The developers of J. Rummy Apps offer to use a universal application manager to back up programs and information. Ultimate Backup backs up data stored on both local storage and cloud storage (data and settings require root rights), working with Drive, Box and Dropbox. The application also contains a built-in uninstaller, the function of force termination of processes (“task killer”), the function of clearing the cache and much more. In addition to backing up apps, you can back up your call log, browser bookmarks, and Wi-Fi settings. Ultimate Backup offers a decent yet free set of system tools even without root access, while the premium version comes with some extra features, including a scheduler and cloud backup restore.

10 Best Android Backup Apps | Titanium Backup

Cost: Free/$6.58

Already rooted your Android device or thinking about getting root access? Titanium Backup is a reliable working backup app for Android devices, and the free version allows you to backup and restore apps and various data, including contacts, SMS logs and more, with tools that greatly automate the backup process. The premium version comes with a lot of great features, including cloud backup and restore, as well as an automated scheduler, selective backup of items, and moving backed up data to an SD card.

10 Best Android Backup Apps | My Backup Pro

Cost: $3.99

My Backup is another powerful backup and data management app for Android devices. This program includes backup features and an automatic scheduler, as well as the ability to create a backup in the cloud and many other features. While My Backup works great on non-rooted phones, its true potential is unlocked on rooted devices, as it allows the user to back up not only apps, but also various data and settings, such as saved games. In order to try the program in action, you can use the 30-day demo version.

10 Best Android Backup Apps | Super Backup

Cost: Free/$1.99

Super Backup is a fast free app for Android smartphones that can backup and restore data along with apps and settings (root access is required) and perform these processes automatically through a scheduler. The backup is saved to an SD card, internal storage, PC or Gmail (although this would look ridiculous for anything other than phone data). There is no cloud backup option from Gmail, so you will have to import backups to the cloud, as well as to an SD card or PC, yourself. The advantage is that all these features are provided for free, and the purchase of a premium account only serves to get rid of ads.

10 Best Android Backup Apps | GCloud Backup

Cost: Free

If you need to save mainly not programs, but photos, music, videos, contacts or call logs, then your needs will be satisfied by the GCloud Backup application. Users need to create a dedicated GCloud account that provides 1 GB of free space (expandable with a premium account), and all you have to do is select the required backup information, which will then be automatically copied to your account . The backup process can be done using the scheduler, and viewing in the cloud can be done through an account in the cloud service.

10 Best Android Backup Apps | Mobile Backup & Restore

Cost: Free/$1.99 per month

Mobile Backup & Restore is Avast's new take on Android backup apps. The free version allows you to back up contacts, SMS messages, call log and photos, and with a monthly premium account you can use the same features for music, videos and applications. Mobile Backup & Restore stands out from the rest with its task scheduler and easy-to-configure automatic features, as well as many options to back up fully or selectively to Drive and Avast servers. Users with root access and premium accounts can save application data. Overall, Avast's software isn't as demanding as some others, and it's also one of the easiest to use.

10 Best Android Backup Apps | SMS Backup+

Cost: Free

If in the matter of backup you are only interested in saving SMS messages and call log, then you should try SMS Backup. The application automatically syncs SMS, MMS and call log with your Gmail account, marking each group with tags. Automatic backup settings allow you to adjust when and how often messages are backed up, which can then be restored using tags. While this app doesn't have as many features as many other programs (and some users have reported problems with KitKat), it makes it very easy to take an extra copy of messages and call logs.

10 Best Android Backup Apps | ROM manager

Cost: Free/$5.99

Another program from ClockworkMod this time is not an application exclusively for backup, but it is a powerful system tool for rooted devices, capable of actually completely cloning the software part of your device in its current state. In addition to creating backups, you can view their contents and restore the firmware. And although this program is not as focused on the backup process as specialized applications, the functions of ROM Manager are great for those users who like to fiddle with custom ROMs and variations of Android, because with this program you can create system restore points and use them if you you need to bring your device back to life.



Everyone knows that an unpleasant surprise can await any owner of a smartphone or tablet. So, you need to periodically save data in a safe place - do backup android. And it is absolutely necessary to do this before launching a new suspicious application or if you are going to delve into the device stuffing. For "hacked" devices, there are plenty of programs that specialize in this, but for those who like to do everything legally - without - everything is a little more complicated.


In fact, if you need a backup at one time or don't mind $3.99 for the official full version, there is an ideal option. MyBackup Pro app can do everything that may be needed in this area: save data of various types to an SD card or in the cloud storage offered by the developer, restore them at the right time, set up a schedule for regular backups. Free version MyBackup Pro for android allows you to use all functions for 30 days.


It's easy to back up with. A few simple steps are easy to follow from the screenshots posted on the application page on the market. To get started, choose what you need to do: Backup - backup save. Then decide what you will save: applications and media files (applications & media) or information in general (data).


Then you will need to choose where you will save the data: to an SD card or online, on the developer's server. The types of data to be saved can be checked in the list:

Top Related Articles