Owners widescreen screens I liked not only HD channels, but also the built-in film library from Rostelecom. Now you can while away the evening with the same great pleasure as the diagonal of your TV. But a review of your favorite works of cinematography can upset all sorts of unpleasant situations. After all, the receiver (STB) is not a stainless steel rail, the price of which is much higher, but rather a complex piece of hardware with its own software, so it is not surprising that failures occasionally happen here as well.
« What should I do if, when ordering or watching a movie from my collection of ANY movie, it starts to “pixelate”, disintegrate into squares?»
For example like this:
Ordinary channels are shown normally, but films start to "glitch"? This happens when the settings on the STB are reset (reset to factory default or reset). In 90% of cases, if when ordering (previewing) any film, even from the collection "Mine", problems begin - a banal reboot of the console helps. on nutrition (!)... This means that you need to disconnect the power plug from the set-top box and plug it in again:
Also try to check for updates for your set-top box in « System Preferences» if there is no way to reboot the set-top box:
... I will change the STB / modem / place of residence, will the films I bought remain in the collection?
Yes, the films will remain in the collection.
... is one movie more expensive than another?
The cost of a film is equally proportional to its novelty and relevance. The most expensive ones are barely finished in cinemas. There are films that run alongside cinemas.
... only one movie is buggy?
This is a general problem, specifically a movie file. Here and now, the problem cannot be solved - do not order or buy this film yet.
... the movie doesn't rewind?
In order for the rewind to work in the film, you need to buy it. In preview mode (the first 5 minutes of the movie, if you don’t buy it right away), rewinding will not work.
... the film shows, but the quality is unsatisfactory?
For cases when the movie slows down, shows fragments and / or the sound lags behind, the menu of each movie has special button as road sign With exclamation mark inside. Select it and specify a category - poor quality sound or image. Information will go to technical support, where measures will be taken to fix this "bug".
Digital television is modern alternative standard TV. With this technology, the image quality becomes much better for the same cost. The essence of this technology is that signals are a sequence digital combinations electrical impulses. Digital technology provide new opportunities for transmitting and receiving data.
It has its advantages. For example, mobility. You no longer need to pull wires and cables, all you need is a TV, an antenna, digital receiver and a socket. This autonomous system, which you can take with you, for example, to the dacha and watch TV programs with the same high-quality signal as in the city. Also on digital TV a large number of broadcasted, and you can also access the Internet, TV guide, etc.
Possible causes of interference
A digital signal is usually reliable and much better than an analog signal, but even it is not immune to various kinds of interference. In any case, if the broadcast quality deteriorates, you will have to find out the reason why this happened. For example, if the TV shows poorly and is on, you need to check the antenna. Maybe it was poorly installed or just lost. Also, the antenna can break due to a large snowball or a piece of ice. In addition, the TV may be poorly displayed due to a broken, damaged receiver, etc.
If, when connecting a digital TV, the masters supplied the cable to the apartment, and further wiring was carried out independently (especially if there was more than one TV), then it may be bad in the tee. Interference can also occur if there is also a computer nearby and they are connected through HDMI cable... As a rule, TV interference starts when the computer is turned on, and as soon as the computer turns off, the image becomes high quality again. In this case, interference may occur due to the fact that the computer (or rather a video card with an HDMI port).
If you live on the top floor and the signal is weak, it is possible that the nuts on the dividers are oxidized or burnt, the equipment is not configured or is out of order optical receiver... There can be many reasons for the appearance of interference, and the easiest way is to call the master to find the true cause and eliminate it.
Availability at your home digital television allows you to view a variety of different digital television programs... Delivery of digital TV to the consumer is carried out by connecting to the appropriate cable TV... In this case, you can continue viewing the same way and analog channels v in full.
Instructions
You should know that for the reception digital signal you need to install equipment that has the function of receiving and displaying the standards of the transmitted signal on the TV screen.
It can be following devices.
Cable Receiver, Freestanding, DVB-C standard(when using cable networks) or DVB-T (with normal broadcasting) having separate console management. The receiver should be connected to the audio-video inputs of almost any TV, both analog and digital;
Modern tv, which has a built-in DVB-C and / or DVB-T tuner. V in this case just the cable through which you receive the network signal to the antenna socket, and you can receive the signal after setting up the TV.
A computer, however, for viewing, an additional PC card or an external tuner connected via a USB port is required.
