This article led you to such a common problem as freezing iPad. Despite the fact that it may seem completely frivolous, it can go hand in hand with some serious problems, primarily concerning the operating system of the tablet.
Freeze can occur due to many factors and its "treatment" will also depend on the individual case. Next, we will consider the most common of them and offer options for getting rid of this annoying failure.
Freezes reasons and solutions
Each of the cases when the device freezes is different.
In general, several categories of problems can be distinguished:
- lack of response to key presses or interaction with the sensor;
- inability to get to the "Home" screen;
- ipad freezes and does not turn off in sleep mode;
- the gadget does not respond to attempts to disable it;
- freezing when updating or resetting settings;
- the appearance of a white screen.
For these failures, the ways to get rid of them will also be different. We will tell you about this in more detail below.
When updating
If the iPad freezes during the update process, then to restore its functionality, you will need to uninstall the current software version and return the one that was installed before it.
For this we need:
Important! Be careful not to disconnect cables or power to the tablet during the update process. Even if the process completes successfully, the device may not have the files necessary for it to work correctly. In the future, this can lead to serious problems and the need to reinstall the OS.
When factory reset
The hang is most often caused by internal tablet errors. What if one of them appeared right during the update or firmware of the device? Is the tablet frozen and unresponsive?
There may be several problems in this case:
- software error;
- problem with the firmware file;
- failure of the update process.
Faced with one of them, you should understand that they are quite serious and in the future can lead to errors in the operation of the device. The solution can be flashing and re-updating.
Attention! To avoid such problems, it is recommended to use a known working firmware file and not interrupt the tablet update process. .
When turned on on an apple
Another common mistake is when the device hangs on an apple - the startup screen.
The most likely reasons for this behavior iPad can be considered:
- re-write the update;
- remove the applications causing the conflict;
- reinstall the OS using a proven firmware;
- remove contaminants or take the device for repair.
It also happens that the tablet is interrupted by the appearance of a white screen. The reasons for this phenomenon can be hidden in both software and hardware failures.
To get rid of this problem will help:
- Shutting down iPad by holding the Home and Sleep buttons for about 10 seconds;
- the so-called "hard reset" - pressing the "Home" button located on the front side of the device and the "Power" button located above.
Important! You must hold down the buttons until the tablet completely reboots, until the screen saver with an apple appears on the screen. During a forced restart, data is not deleted from the device.
Video: Treatment of an i-device from the "eternal apple"
How to restart iPad if it is frozen
If you experience any problems with your iPad, it is often sufficient to simply restart it. But when it hangs, it may not respond to normal restart, touch and other key presses.
A forced restart will help, which is quite simple to do:
If the problem persists, repeat this procedure, then contact the repair shop.
Note! The reboot time for each specific case can range from 2 to 30 seconds. After that, the device will be ready for use again and the information on it will be completely saved. This process is the same for iPad 2 and other Apple devices.
We should also mention the tablet freezing due to mechanical damage.
The most common of them are:
If after that there are problems with the operation of the iPad, then you should pay attention to several points:
- if moisture gets on the device, it must be removed immediately using a soft cloth, sponge or dry napkins;
Important! A hairdryer is also suitable for this, but it is very important not to use heating modes - this can lead to overheating and subsequent damage to the device. You can remove moisture from it only with cold air and very carefully.
- try not to leave the iPad in the sun for a long time and only carry it in a bag, protecting it from the elements;
- timely clean the tablet from dust, on your own or by contacting a service center;
- after a fall, if errors continue to appear again and again, we recommend that you seek professional help.
Attention! It is recommended to disassemble the tablet on your own only if you already have similar experience.
So, we have considered all the most common reasons that can lead to a freeze tablet. In many of the above cases, the problem that has arisen can be easily solved at home, but when the failure is not software, but hardware in nature, the best solution would be to contact a specialist.
Owners of Apple iPad tablet computers consider their technology so reliable that sudden failures and malfunctions plunge people into a stupor. If your iPad does not turn on, you do not need to be scared - any situation can be corrected. It is quite possible that it did not break, but simply hung, because software breakdowns are not rare. In this review, we'll go over all situations and figure out what to do if your iPad won't turn on or charge.
IPad won't turn on due to charging
If iPad won't turn on, then the problem may lie in a low battery level. A deep discharge often leads to the fact that tablet computers do not turn on at all or turn off one to two minutes after starting. Therefore, the first thing you should do in this situation is to put the tablet on charge and leave it alone for several hours. During this time, the battery will be charged, and you can try to turn on the iPad again - most likely, a new attempt will be successful.
You charged your iPad, but it turns out that it won't turn on again? In this case, you need to check the functionality of the charger. It may not provide the required charging current, interfering with the normal charging of the battery. If you leave the iPad for a long charge, then if the charger is broken, this will have absolutely no effect. To check the operation of the memory, use another tablet or iPhone... You can also try a different charger on your tablet or even try to recharge from the USB port of your computer.
If you are sure that just a few hours ago the battery was full, put your tablet on charge anyway - it is possible that the battery was completely discharged in those few hours.
Making a reset
Stationary computers and laptops appeared much earlier than tablet computers. Experienced users who work a lot with computers know very well that if the equipment shows signs of a complete freeze and is not going to restore its performance, you should click on the "Reset" button. In the case of laptops in which this button is absent, you must press and hold the power button - after a while the laptop will turn off, after which it can be started and loaded again.
What if the iPad won't turn on? You should try to force the tablet to reboot. Also, care must be taken to ensure that all data in the internal memory remains intact. Since there is no Reset button on the iPad, we will act in a different way - hold down the power button and the Home button, hold them for 10 seconds and wait until the tablet goes to reboot (a bitten apple should appear on the screen). As soon as the iPad reboots, its performance will be restored.
Please note that this reboot method does not result in the loss of user data. But periodic backups have not hurt anyone yet.
Restoring iPad
Do you have an iPad 2, iPad mini, or any other kind of tablet from Apple? Your device won't turn on? It is possible that some kind of fatal software breakdown has occurred in it, which interferes with normal functionality. In some cases, even a reset does not help here. What to do?
You should try to restore your tablet - in this case, it will return to the state in which it left the factory. In order to restore the operating system, you must perform the following steps:
- Turn off the tablet completely - its display should go out;
- Connect your iPad to your computer and launch iTunes;
- Hold down the power button and the Home button on the iPad, wait 10 seconds;
- Continue to hold the Home button for another 10 seconds.
After that, iTunes will notify that a device connected in recovery mode has been detected - then the program will begin to restore the iOS operating system by downloading the firmware. As soon as the procedure is completed, the iPad will reboot and turn on (if there are no other breakdowns on board).
This method is very radical, as it involves the complete deletion of data from the internal memory. Therefore, a backup copy is required to restore them.
Moisture ingress
Aypad does not turn on - the apple lights up, and then goes out. What to do in this situation? If the problem occurs after moisture has entered, it is necessary to urgently take the tablet to the nearest service center. Here it will be carefully disassembled, cleaned and dried, and then checked for functionality. And you do not need to listen to advice on self-cleaning - this way you can only harm your electronic assistant. This work should be done by specialists.... They will also be able to cope with other tasks to restore the performance of Apple tablets.
A similar behavior of the iPad, when an apple lights up on the screen, and then goes out, manifests itself in many other malfunctions. For example, when the battery is depleted.
IPad won't turn on or charge
What to do if iPad won't turn on or charge? Such situations do not occur very often, but it is easy to identify the cause of this behavior. The problem may be related to:
- With a general malfunction of the device - it will have to be taken to the nearest service center;
- With a battery malfunction - this is another reason to go to the service, since the batteries are changed only here;
- With a defective charger or cable - check the integrity of these accessories and buy a replacement (if found defective).
In this way, at home, we can perform only the last operation - check the cable and charger.
Self-repair and repair service
What if the iPad won't turn on? There are many DIY repair tips online. We consider this advice harmful - disassembling iPads is a complex and painstaking process that requires certain skills... As for the repair of the electronic part, then work experience is needed. Otherwise, you just ditch your tablet, and the total cost of repairs will increase significantly - let the specialists do the repairs. You can follow the above steps and check the performance of some nodes.
In the life of almost every person, minor problems or questions arise, the answer to which is not known to everyone, but only to dedicated people. Situations with a variety of techniques are a prime example of this. Not everyone can figure out how to disable an inadvertently activated function on the phone, how to cope with intrusive subscriptions, and the like.
Today we will talk about a rather popular problem that many owners of Apple devices face: the message "iPad is disabled, connect to iTunes." What to do? First, you need to figure out the reasons for such a blocking of the device.
"IPad is disabled, please connect to iTunes." What to do?
This error occurs when iPad or four-digit password. When choosing a code to unlock the device, you can enter it incorrectly only 6 times, after which the iPad will be locked for exactly one minute. If you enter the wrong password further, the iPad is locked after 10 incorrect attempts.
Such situations happen very often, users of iPad, iPad mini, iPhone and some iPod models face them. Not everyone can keep in mind a lot of passwords, appearances and a lot of information. Having forgotten the unlock code corny, the owners start frantically picking it up at random. Or children playing with a tablet, phone or player will press a lot of unnecessary keys. Although it is possible that it really will be a fraudster trying to hack an expensive gadget in order to completely take possession of it.
All this leads to blocking when the display says "iPad is disconnected, connect to iTunes". What to do in this case?
In fact, when faced with such a problem, one should not despair. There is always a way out, the main thing is to be able to find it, isn't it? There are two fairly simple ways to solve this situation with mini, iPhone and iPod.
1. Choosing a password on the lock screen
The simplest method is precisely the selection. The great advantage of this method is the complete safety of the data on the device that is locked. That is, if the device has not been backed up. The disadvantage of this method is that from time to time it will be necessary to reset the number of dialed attempts through iTunes, which will only work with a device that is familiar to him. That is, if the gadget was previously connected to this computer, otherwise iTunes simply won't see it. All the same
2. Reset password via iTunes
If point # 1 does not help, and the device cannot connect to iTunes, then you need to do it forcibly. Apple smartphones, tablets and players have a special mode - DFU, which is designed to flash the device.
- The first thing to worry about is downloading and installing an up-to-date version of iTunes.
- You need to connect your iPad to a computer with iTunes when it is off.
- Now you need to enter DFU mode by long pressing the HOME button (in the off state of the gadget!) And then pressing the power button. It is worth noting that you need to hold the buttons for 10-15 seconds.
- Next, the iTunes page will appear on the computer monitor, offering to either update the device or restore it. Often the latest versions of the operating system are already installed on tablets and smartphones, so you need to click the "Restore ..." button.
- If the "Refresh" button is on, and the user knows that there is such an opportunity, it is better to update his gadget, since in this case all data is saved. When restoring, all user information will be deleted.
Important! You never need to press the Refresh button if your device is jailbroken (Cydia store on screen). To flash such phones or tablets, you need to use recovery.
Device update via DFU mode
Updating the device via DFU mode avoids some software errors. This is an effective way to replace the operating system in old devices with newer versions. The update steps are almost the same:
- Download the current version of iTunes.
- Download the updated version of the operating system.
- In the off state, connect to iTunes.
- Hold down the HOME button, after 5 seconds, press and hold the power button. This operation takes 10-15 seconds.
- Then iTunes will find the device and show the corresponding icon.
- While holding down the Shift key on the keyboard, select the "Restore" item.
- A window will appear in which you need to select the firmware in the .ipsw format
- Select the firmware file and click "Open", after which the firmware installation process will begin.
These are some simple ways to unlock an iOS device. Now, faced with the inscription on the screen "iPad is disconnected, connect to iTunes", what to do, the user knows for sure. A little time, and the problem is solved. And in order to prevent such situations again, you need to change some settings on the device.
How to disable the "Erase data" function
1. You need to open the settings (iPad settings) on the device.
3. Then scroll to the very bottom and put the "Erase data" switch to the off position (in this case, the bar will be gray, if it is green, then the function is active).
In order not to lose the accumulated data in case of emergency, you need to set up a backup of the device to a computer via iTunes or directly to iCloud.
in iCloud
- Requires a Wi-Fi connection.
- Then go to the settings, then to the iCloud section - "Backup".
- The backup switch must be active. If not, you need to move it to the on position.
- Click "Create a backup" and wait for the download process. It is important not to turn off the Wi-Fi network while doing this.
This type of backup can be performed automatically, provided that the device is connected to a Wi-Fi network and a power source. If there is enough storage space and the screen is locked, a copy is created in iCloud. Many people put their phone on charge overnight. During this time, he manages to create a copy. But you need to keep track of the free space in iCloud.
in iTunes
- Connect your device to iTunes.
- On the main page of the device in iTunes, you must click "Create a copy now".
- Wait for the download process.
In the backup storage of information of this type, it is also possible to automatically create copies of the device each time it is connected to a computer. To do this, on the main page, you need to select the appropriate column. This is very convenient, which is why many people around the world use these tips in their daily life!
And most importantly, you need to remember that all passwords should be kept in an inaccessible place. Experts advise to always set your Apple ID profile in the "Find iPhone" function to increase security. Also, this function allows you to find your device both in the trivial situation of losing it at home (when the search function is activated, the device gives a signal indicating its location), and when the gadget is stolen or lost (from the personal account of the icloud.com website, it is possible to determine the location of the device on the map).
What to do if: Aypad is buggy, Aypad slows down and Aypad freezes? We've put together 11 tips on how to fix these issues!
If your iPad model is older (for example, iPad 1, 2, 3, 4, or iPad mini 1, iPad mini 2), then your tablet will slow down over time. The main factor why the iPad starts to slow down is the wear and tear of the internal storage on which the operating system is located.
In order for your device to work like new, you need to change the internal memory card, but before that, try to solve the problem using the following methods.
If your iPad lags, uninstall the apps you no longer use. Apps take up storage space, and freeing up storage space makes it easier for iOS. Uninstall any apps you no longer use.
You can uninstall apps you no longer use by pressing and holding the app icon until it starts jumping. Then click on the "cross" in the upper right corner to remove it.
To uninstall multiple apps at once, go to Settings> General> iCloud Storage & Usage. Now click on Manage Storage (under Storage, not iCloud) and look for items that are taking up a lot of space. Review the content of the application, and then click "Uninstall".
Also, instead of applications, you can delete unnecessary files, videos, photos, music, etc.
Restart iPad mini, Air, or Pro using the instructions below
After uninstalling unused apps or files, you must restart iPad, which will refresh the tablet's memory.
To restart iPad, press and hold the Sleep / Wake button until you see a slide to turn off the power, then turn off the device.
Then press and hold the Sleep / Wake button to turn on.
If the iPad freezes, then do a hard reboot:
Hold the Off / On and Home button at the same time until the Apple logo appears.
Then turn on the device in the usual way.
Stop updating apps in the background so that iPad stops lagging
After you've freed up some storage on your iPad, it should run faster. But if you're using an older generation iPad like iPad mini or iPad 2, turn off features you might not need to improve device performance.
First, stop updating apps in the background. If you have a lot of active applications (social networks), then they will use the processor power from your iPad, even if you do not open the application.
Tap Settings> General> Background App Refresh and set Background App Refresh to Off.
You can make it so that some of your apps use background refresh and others do not. But we recommend that you disable all applications.
Don't update iOS (or your apps) if iPad is slow
It may sound counterintuitive, but when a device starts to wear out, updating to the latest iOS version may slow it down rather than speed it up. This was the case with the original iPad running on iOS 5.
All of these new features require more resources, and when your device reaches a certain age, it doesn't always have enough power.
The same goes for apps - as apps become more functional, they become more difficult to run on a legacy device.
Unfortunately, this point will not help those whose devices are already slow due to these updates. If you've already updated, skip to the next step, but be aware next time that updating may slow down your device.
Use standard Apple apps
Over time, some third-party apps don't update and slow down the device. Therefore, uninstall or update the old app.
If your device starts to slow down, it's best to use standard apps from Apple developers.
Clear Safari Cache
Your browser cache is another place where you can clear up some storage space, which can lead to small speed improvements. Safari is the most common browser that slows down your device. This could be caused by a full cache that is stored in Safari.
To clear all Safari caching information, go to Settings> General> Clear History and Website Data. This should speed up the Safari interface.
If you have any additional tips to improve the performance of your browser, write them in the comments.
Clear cache of all applications
If clearing the cache in Safari did not help, then try clearing the cache for all iPad applications.
We clear the cache using the application:
How to clear iPhone memory from iOS
How to clear cache on iPhone or iPad?
How to clear junk memory on iPhone and iPad
The easiest way to clear iPhone memory
Turn off alerts for iPad acceleration
Every time you receive a notification about a new message on Facebook or about the restoration of vitality in your favorite game. As with background app refresh, scanning and providing notifications can slow down your iOS device.
To turn off notifications go to Settings> Notifications, and set Disabled for each app.
IPad glitches or iPad slows down or iPad freezes
Disable Location Services (GPS) on iPad
While location is convenient for apps such as Maps and Facebook, this feature reduces battery power and performance.
Tap Settings> Privacy> Location Services and select Location Services and then Disable.
Be careful the find my iPhone feature won't work.
Turn off Spotlight
Spotlight launches a search on your iPad across all hard drives and user information. This search tool can slow you down.
Go to Settings> General> Spotlight Search and set all search results items to Off.
Enable Motion Reduction
Turning off some visual effects can provide a performance boost. Go to Settings> General> Accessibility> Reduce Motion and set Reduce Motion to On.
Also, check out the other tips in the articles below.
Once you've backed up, you're ready to erase all content on your iPad and return it back to its “factory defaults”.
If your iPad does not turn on, you can immediately contact the service center to the specialists or first try to cope with the task yourself. Many minor problems that lead to the tablet not turning on can be fixed on your own, even without special skills in restoring Apple technology.
If the battery is flat
The simplest and most obvious reason that led to the fact that the iPad Mini or Apple tablet of another model stopped turning on is that the battery is completely discharged. Connect the charging cord to the device and wait about half an hour. If the iPad starts charging, then very soon you will be able to turn on the device, and it will work without errors. It should be remembered that after a complete discharge, the tablet takes a long time to boot.
Clogged or broken charger connector
If your iPad does not charge (and therefore does not turn on), it may be that the charging socket is clogged or broken. Follow these steps:
- blow dust off the connector
- clean it with a special paper clip
Most likely, after that, your tablet will start charging again when the cable is connected, it will be easy to start up and work correctly. If the connector is damaged, the tablet should be taken to the master.
Broken or unsuitable cable
Your iPad may not charge because the charger cord is damaged or the charging model does not match your device. Apple's technique is quite sensitive to the use of third-party wires. By connecting them, you will see an error notification on the iPad screen. In this case, all you need to do is replace the charger.
There was an error after jailbreaking or installing a tweak from Cydia
If your iPad shuts down, doesn't respond to button presses, and the Apple logo lights up on the display, the problem is probably that you've jailbroken or installed a tweak from Cydia. This could have resulted in an iOS error that caused your tablet to freeze and not start. There are two ways out of this situation:
- simple- carry out a HardReset (hard reboot). To do this, for 10-15 seconds, simultaneously hold down the on-off buttons and the "Home" button. Your Apple Tablet may work properly again after a hard reset
- difficult- restore the operating system via iTunes. Connect your device to your computer. Wait until iTunes starts to burn, press the Cntrl + S keys, and then go to the "Browse" folder. Perform a hard reboot. After that, you will receive a system prompt to restore the operating system. Agree and wait a while. After the update, your device will be ready for use again.
Remember that by doing iOS Self-Repair, you are solely responsible for the Apple Technician.
Water got into Aypad
If your iPad stopped turning on after water got into it, do not worry - the tablet must be restored. It is best to urgently consult a specialist, but in some cases you can cope on your own. If you have technique recovery skills, follow these steps:
- unscrew the bolts, remove the back panel and take out the battery
- check if there are any breakages
- remove water from plumes, boards and contacts with paper towels
- dry the tablet
- assemble the device
A short circuit has occurred
It is possible that a short circuit caused your iPad to shut down. Apple tablets have fixed power consumption figures. The use of third-party accessories can lead to the following consequences:
- violation of the integrity of the electrical circuit
- short circuit and burning of parts
If your iPad won't turn on because of this, you won't be able to fix the breakage yourself. You should urgently contact a specialist.
The on-off button is broken
Sometimes the iPad turns off and does not turn on because the button is broken. When you see a black screen on the iPad, put the tablet on charge: if the power consumption starts, the charge indicator of the device lights up, but when you press the power button, the device does not boot - the problem is in it. If, because of this, your iPad stopped turning on, you need to contact the wizard.
Other breakdown symptoms
When the iPad does not turn on, other problems may appear. The most common ones are listed below:
- Apple tablet shows the clock and goes out
- iPad charging goes out
- the screen turns off spontaneously, the iPad goes out
When the help of the wizard is needed, if the tablet goes out
If your tablet shuts down, won't turn on, suddenly goes dark, freezes up badly, and you can't fix the problem yourself, contact. Masters registered on Yuda will provide urgent and inexpensive assistance in a situation when your iPad unexpectedly turns off or freezes.
Professionals registered on the site will quickly find out why your tablet goes out or does not turn on. The craftsmen use special tools, original spare parts and modern technologies - for whatever reason your device goes out, specialists will competently restore it in a short time.
Describe your situation in the application (for example: "Aypad does not turn on") - the masters themselves will write to you in order to fix the breakdown efficiently and inexpensively.
