Htc wildfire s a510e getting root. What do you need to get Root with Kingo Root? We use the Rootkhp program

What should you do on your smartphone after unlocking the bootloader? Of course, get superuser rights with access to system directories and load custom recovery allowing to install third party firmware, kernels, interface mods ...

Below I will describe these procedures using my HTC Wildfire S as an example.

Step one.

You should install first ClockWorkMod Recovery... There are many ways, but here we will discuss booting over the network. Install with Android Play Market program ROM Manager. In the application, select the first item: "Install ClockworkMod"... The most downloaded from the Internet latest version recovery and replace the standard one.

Note: On some devices released in 2012, ClockWorkMod Recovery cannot be installed. The reason is unknown, as is the solution itself ...

Step two.

To obtain superuser privileges, you need to flash a special zip file via CWM Recovery... You can download the archive from my dropbox account using this link:

We put the downloaded file in the root of the memory card (don't unpack it!)... We open ROM Manager and click on the second line: "Download Recovery mode" ... The smartphone will reboot and you will be in recovery. Go to install zip from sdcard > choose zip from sdcard> select the archive and agree. Then we reboot with the command reboot system now.

Note: in recovery mode, the touch screen does not work! Therefore, the volume buttons are used to move up / down, and the power button is used to select.

Step Three, optional.

If you intend to experiment with your firmware, then it is advisable to do full backup (nandroid backup). Boot into CWM Recovery, then backup and restore > backup> and upon completion reboot system now... The backup will be created in the folder clockworkmod at the root of the memory card. If desired, you can transfer it to your computer to save space.

Good luck!

You purchased yourself new smartphone or a tablet running on the Android operating system, and do not know how to expand the functionality and get root access on the Htc wildfire S? The Zlauncher website will quickly show you how to implement your plans with the help of instructions and videos.

Root rights to Android OS

Root rights are elevated privileges in the operating system Android... After receiving them, you can install a number of programs and make certain modifications that will significantly speed up Android work devices. You can effectively set up energy saving, automate actions, overclock the processor frequency, solve any troubles and problems with the phone... You can read more about this.

Instructions on how to get root rights to HTC Wildfire S

The administration is not responsible for your actions! The Zlauncher website contains instructions verified by people, the data provided are copyrighted materials and their copying is not permissible without reference to the source. Respect the work of others. We do not post paid programs and "left" instructions.

Two instructions were found for this model.

1. We use the Rootkhp program

2. We use the Kingo Root program

Watch the video on working with the program if you suddenly do not understand something. If this does not help, write down in the comments about your problem, describing in detail at which step you have an error.

Find and Buy HTC Wildfire S on Aliexpress as well as a case, headphones or other accessories for this device can . Often devices are here on sale or with large discounts. And you can always buy new items place a pre-order.

This article and subsequent ones will tell you how to get Root on HTC WildFire, as well as firmware options and much more. I'll start with the history of my purchase of this phone model. I originally reviewed Samsung, with AMOLED display... But at the time of purchase, the dealer was the Svyaznoy network, the promotion ended and budget models were all sold. Then I conducted a market analysis mobile phones with Android OS. I came across a model HTC WildFire - the only drawback of which at that time, in contrast to other manufacturers, is that they saved on the display. Yes, this is a minus, but against the background of the rest - a big plus. Of course, now there are better models, but I didn't buy today) Again, at that time, the only one who sold these phones was mobile operator“MTS” - I didn’t know then how I could fly. There are two points: first - MTS rolled its firmware there with glitches and restrictions. Second, if I ran to update the software version over Wi-Fi for joy, I would voluntarily ban my phone. Again, we can say thank you to the MTS firmware - because of its glitches, it did not allow me to update the software) When updating to the official firmware, the "HBOOT" version is flashed!

From this we will start to build on, before starting to obtain Root rights, you need to find out the version of your "HBOOT" - since not with any version, you can get Root, and with it the ability to install Firmware different from the official ones. Official - on this moment far behind pirated assemblies)

Again, I note that everything that you will do below will be on your responsibility: i.e. if the hands are not from there, then there is an opportunity to bury the body) The site and the editors do not bear any responsibility for this!

How do I find out the HBOOT version?

• Turn off the phone
• Press the volume button from the bottom and turn on the phone at the same time
• As soon as you see a certain menu on a white background, release the buttons
• And we look at the second line from the top: HBOOT-0.80.0007 (example)
• To exit this mode, using the plus / minus volume buttons, select the Fastboot> Reboot item in the menu

We conclude that if you have a version higher than 0.08, then everything is very bad, and if it is equal or lower, then you are in luck) On HTC Wildfire, the HBOOT version can vary within 0.80.000x -1.01.000x. You can only flash the version: 0.80.000x!!!

Quote from w3bsit3-dns.com:

Downgrading HBOOT version for HTC Wildfire is possible only when secuflag protection (S-OFF) is disabled by flashing the phone to a lower version (2.1 for example)

New devices from HTC are equipped with a protection called secuflag. This protection mounts read-only in the / system and / recovery partitions, that is, we cannot change / copy directly from the phone system files, we also cannot flash zip files via fastboot and recovery, since the protection allows flashing only files signed by HTC. S-OFF turns off all checks in the bootloader, mounting it in the / system and / recovery read / wrire partitions.

You can get S-OFF on HTC Wildfire using XTC clip (device worth ~ 1400r for 2011), as well as with the help of a program from the developers Revolutionary .

If you decide to upgrade to Official firmware 2.22.405.1, then you will get HBOOT 1.01 ...)

Owners of HBOOT 0.80.000x (like me) - please read the article further:

Quote from w3bsit3-dns.com:

1. For Windows owners (for Linux, MacOS - skip this step):

Download this driver here: android-usb-driver.zip and unpack it into any folder.

Install the last HTC Sync on a PC. Together with it, two drivers are installed: HTC BMP USB Driver and HTC Driver Installer.

We delete only ourselves HTC Sync leaving the other two drivers on the computer. You can reboot your PC.

We connect the phone to the PC using a cable.

We turn off the phone.

Hold down the Volume down button and turn it on.

As soon as the menu appears on a white background, release all the buttons.

Then we go to the Device Manager and find there android device 1.0.

Click on it right click mouse and select Update drivers.

In the window that appears, select Search for drivers on this computer.

Then we indicate the path to the folder into which you unpacked the downloaded driver and click next.

The driver is installed and we close the Device Manager.

We reboot the phone (without holding down the key).

2. The last push. Before him, you need to disconnect the phone from the PC. It is also highly recommended to disable the antivirus:

• Unpack using any reflash_package.exe archiver (I used WinRAR) into any folder convenient for you.
• In the phone, go to Settings> Connect to PC> Default connection type> select Disk drive or Charge only and uncheck the Ask me box.
• Back to Settings> Applications> Development and put a tick on the item USB debugging if not already.
• We return to the Applications and put a tick on the item unknown sources if not already.
• Run the reflash.exe file on the computer from the same folder where we unpacked reflash_package.exe as administrator - right-click> Run as administrator. (If you have Windows Vista / 7 or just start if you have Windows XP).
• We connect the phone to the PC.
• We are waiting (it should take no more than 2 minutes), read the comments of the program)
• After the end of the program in status line program, you will see the inscription Done! and the device will reboot into recovery.
• Attention! If the phone remains hanging with the HTC inscription on a white background, then remove the battery, turn on the device and try again.
• Congratulations, you did it! Wait 20 seconds and the phone will reboot itself into normal mode... If this did not happen, select reboot sytem now - by clicking on the optical joystick to reboot, or install custom firmware.
• If programs requiring root do not work or report that there are not enough rights, you need to install Superuser.

What should you do on your smartphone after the bootloader? Of course, get superuser rights with access to system directories and load custom recovery that allows you to install third-party firmware, kernels, interface mods ...

Below I will describe these procedures using my example.

Step one.

Install ClockWorkMod Recovery first. There are many ways, but here we will discuss booting over the network. Install from Android Play Market ROM Manager program. In the application, select the first item: "Install ClockworkMod"... The latest version of the recovery will be downloaded from the Internet and will replace the standard one.

Note: On some devices released in 2012, ClockWorkMod Recovery cannot be installed. The reason is unknown, as is the solution itself ...

Step two.

To obtain superuser privileges, you need to flash a special zip file via CWM Recovery. You can download the archive from my -account at this link:

We put the downloaded file in the root of the memory card (don't unpack it!)... Open ROM Manager and click on the second line: "Load Recovery Mode"... The smartphone will reboot and you will be in recovery. Go to install zip from sdcard > choose zip from sdcard> select the archive and agree. Then we reboot with the command reboot system now.

Note: in recovery mode, the touch screen does not work! Therefore, the volume buttons are used to move up / down, and the power button is used to select.

Step Three, optional.

If you intend to experiment with your firmware, then it is advisable to make a full backup (nandroid backup). Boot into CWM Recovery, then backup and restore > backup> and upon completion reboot system now... The backup will be created in the folder clockworkmod at the root of the memory card. If desired, you can transfer it to your computer to save space.

Good luck!

Htc wildfire is a Taiwanese smartphone on which we will tell you how to root, reset settings or a pattern. It runs Android 2.1. There is an instruction and firmware for this model of the HTTs. By the way, its performance is estimated at 5 points. This smartphone is a high performance ..

Root on HTC Wildfire

How to get a root for HTC Wildfire see instructions below.

Below are the universal programs to get root rights for devices on Qualcomm Snapdragon

• (PC needed)
• (Route using a PC)
• (popular)
• (root in one click)

If the superuser (root) rights could not be obtained or the program did not appear (you can install it yourself) - ask a question in the topic. You may need a custom kernel firmware.

Specifications

1. Standard: GSM 900/1800/1900, 3G
2. Type: Smartphone
3. Operating system: Android 2.1
4. Case type: classic
5. Body material: metal and plastic
6. SIM card type: regular
7. Number of SIM-cards: 1
8. Weight: 118g
9. Dimensions (WxHxT): 60x107x13 mm
10. Screen type: color, touch
11. A type touch screen: multitouch, capacitive
12. Diagonal: 3.2 inches.
13. Image size: 240x320
14. Pixels Per Inch (PPI): 125
15. Automatic screen rotation: yes
16. Ringtone type: polyphonic, MP3 ringtones
17. Vibration alert: yes
18. Camera: 5 million pixels, built-in flash
19. Camera functions: autofocus
20. Video recording: yes
21. Geo Tagging: yes
22. Audio: MP3, AAC, WAV, WMA, FM radio
23. Headphone jack: 3.5mm
24. Interfaces: USB, Wi-Fi, Bluetooth 2.1
25. USB charging: yes
26. Satellite Navigation: GPS
27. A-GPS system: yes
28. Internet access: WAP, GPRS, EDGE, HSDPA, email POP / SMTP, HTML
29. Modem: yes
30. Synchronization with a computer: yes
31. Use as USB storage: yes
32. Processor: Qualcomm MSM 7225, 528 MHz
33. Number of processor cores: 1
34. Built-in memory: 512 MB
35. Volume random access memory: 384 Mb
36. Support for memory cards: microSD (TransFlash), up to 32 GB
37. MMS: yes
38. Battery type: Li-Ion
39. Battery capacity: 1300mAh
40. Talk time: 8:10 h: min
41. Standby time: 690 h
42. Speakerphone (built-in speaker): yes
43. Flight mode: yes
44. A2DP profile: yes
45. Sensors: illumination, proximity, compass
46. Book search: yes
47. Exchange between SIM-card and internal memory: there is
48. Organizer: alarm clock, calculator, task planner
49. Features: interface HTC Sense, optical trackball; talk time - WCDMA: up to 440 min, GSM: up to 490 min, standby time: WCDMA: up to 690 hours, GSM: up to 480 hours; upgradeability operating system up to Android 2.2

»

Firmware for HTC Wildfire

Official Android firmware 2.1 [stock ROM file] -
Custom HTC firmware -

The XTC Wildfire firmware can be implemented in several ways. If the firmware file has not yet been uploaded here, then create a topic on the forum, in the section, specialists will help you and add the firmware. Do not forget to write a review of 4-10 lines about the smartphone in the subject line, this is important. The official HTC website, unfortunately, will not help solve this problem, but we will solve it for free. This model of the HTTs has on board Qualcomm MSM 7225, 528 MHz, respectively, there are such flashing methods:

1. Recovery - flashing directly on the device
2. A special utility from the manufacturer, or

We recommend the first method.

What custom firmwares are there?

1. CM - CyanogenMod
2. LineageOS
3. Paranoid Android
4. OmniROM
5. Temasek's

1. AICP (Android Ice Cold Project)
2. RR (Resurrection Remix)
3. MK (MoKee)
4. FlymeOS
5. Bliss
6. crDroid
7. Illusion ROMS
8. Pacman ROM

Problems and shortcomings of the HTC smartphone and how to fix them?

• If Wildfire does not turn on, for example, see White screen, hangs on the splash screen or the notification indicator only blinks (possibly after charging).
• If it freezes when updating / freezes when it is turned on (needs a flashing, 100%)
• Doesn't charge (usually iron problems)
• Doesn't see the SIM card (SIM card)
• The camera does not work (mostly hardware problems)
• Sensor does not work (depending on the situation)

For all these problems, contact (you just need to create a theme), specialists will help for free.

Hard Reset for HTC Wildfire

1. Settings-> Recovery and reset
2. Reset settings (at the very bottom)

How to reset your pattern

How to reset pattern key if you forgot it and now you cannot unlock your HTC smartphone... On the Wildfire model, the key or PIN can be removed in several ways. You can also remove the lock through a factory reset, the lock code will be deleted and disabled.

1. Reset graph. blocking -
2. Password reset -