August 3, 2016 for subscribers of "Tricolor TV" and "Tricolor TV-Siberia" through I new software for the receivers will be launched on the Internet GS B520 and GS B522 and the module included in them, aimed at improving and improving the operation of this receiving equipment.
ATTENTION! Do not turn off the power of the receiver until the update procedure is completed! Otherwise, the receiver may fail.
To update the software, follow these steps:
1. Make sure the receiver is connected to the Internet.
2. Unplug the receiver from the power supply and plug it back in on any channel.
3. After a few seconds, a message will appear on the screen about the need to update the receiver software.
4. Update progress.
After agreeing to update the receiver software, service messages will appear on the screen, reflecting the update process. The receiver software update takes about ten minutes.
5. When the update is complete, the receiver will reboot.
6. After a few seconds, a message will appear on the screen about the need to update the module software.
Select the "OK" option to start the update.
7. Update progress.
After agreeing to update the module software, service messages will appear on the screen, reflecting the update process. Updating the module software takes about five minutes.
8. When the update is complete, the receiver will reboot and turn on in the channel viewing mode.
After completing the software update, go to the application " Personal Area”And check the values in the third and fourth lines.
Another company receiver model created for equipment exchange program participants. The device supports high definition, which means it is recommended for those who want to change the usual television, adding color and realism to it. The GS B520 receiver from the Tricolor company promises to be one of the most reliable set-top boxes with a wide range functions and capabilities.
Equipment characteristics
The GS B520 receiver combines ergonomic classic design, as well as improved software taking into account the errors of previous models. At the same time, the characteristics are selected optimally for comfortable operation by a modern consumer. The receiver can be connected to the Internet via Wi-Fi router v home network, as well as open up opportunities for viewing content on smartphones and tablets, thanks to mirror streaming functions... However, this will require installation of the "Play.Tricolor" application on mobile devices.
The provider declares high speed operation of equipment and absolute protection from unauthorized access to information.
This is due to the use powerful processor MStar K5 and modified software environment from the holding GS Group. The GS B 520 attachment is equipped with a USB connector for connecting external storage and additional devices... Connector for external infrared sensor allows you to mount the receiver behind obstacles without losing control of the remote control.
Installation diagram
The Tricolor GS-B520 receiver does not have fundamental differences from previous models in functional connectors, so the connection is according to the standard scheme.
The primary factor during installation is the installation of the antenna, but given the fact that the equipment is exchangeable, the dish should already be installed. So, it's worth talking about how to connect the receiver itself directly. Quick Start Guide to action looks like this:
STB software update
Soon, Tricolor TV plans to release an update to the version of the previously installed software for the B520 receiver. It will take into account handling problems, and the new environment will also allow for satellite signal more confident. The instructions on how to update the software yourself are pretty simple. This can be done in three ways:
- using a satellite;
- using a computer;
- using a flash drive.
From satellite
To carry out an update from a satellite, according to the manufacturer, is the most logical option.
It is important not to turn off the equipment or interrupt the boot process, otherwise malfunctions may occur.
This option has significant disadvantage: in time the process can take from 5 minutes to several hours, it all depends on the quality of the signal and weather conditions affecting it.
Via computer
In order to flash the receiver via a computer:
- It must be connected to the PC with a USB cable in a disconnected state.
- Install the "GS Burner" program by downloading it from the provider's website, and do not forget about the corresponding files with the software. They can be found by the model name.
- After starting the program, you will need to specify the path to the files by opening the "Open File" tab.
- Click "Upload" and connect the set-top box to the network. The completion of the installation will be indicated by a 100% download scale.
Using a flash drive
If for some reason this procedure is not successful, the version of the program will remain the same. The situation will be corrected by a flash card with the same installation file... The description of the algorithm of actions is as follows.
GS 520 has requested update 3.4.299. This is the software recommended by the operator FIPS code: 393963 (Brand owner NAO "NSK"). It should be borne in mind that according to the subscriber's agreement with the NJSC "NSC" - the subscriber is obliged to update, while the responsibility for the problems of NJSC "NSC" is not. Yes, it is, the FIPS code: 393963 loaded by the operator into the receivers has an interesting status.
GS 520 update 3.4.299 - operator message
Our topic is about something else, let's see how the update goes.
After confirming the start of the update, the receiver starts the process. It should be understood that the process will take 15-25 minutes.
The loading indicator is a scale on the screen. When it reaches 100%, the receiver will reboot itself. In this case, you do not need to do anything, just look at the process.
GS 520 receiver reboots
After reboot, notice which playback mode and which platform the new software is written on.
As soon as the receiver turns on, wait for the second part to update, if the update does not appear, turn on channel 333.
the update is downloaded from the satellite.
Without the second part of the update, the receiver will be weird. This is very important because the receiver actually has two centers. One center is responsible for some processes, the second for other processes. The update of the module, in essence, proceeds in the same way as the first part, press - ok and wait.
GS B520, update in progress.
The indicator scale will show us the process. The receiver will visually freeze a couple of times, but don't do anything, just wait.
GS B520, turning on the receiver after booting.
After successful loading, the receiver will turn on, the indication on the receiver screen will inform you about it.
On June 5, 2017, for Tricolor TV subscribers, new software (software) was launched for receivers of models GS E521L, GS B520, GS B522, GS B521, GS B531M, GS B532M, GS B533M, GS C592, aimed at improving and improving operation this equipment.
ATTENTION! The software update takes place in two stages. Never turn off the power of the receiver until the update procedure is complete! Otherwise, the receiver may be damaged!
To update the software, follow these steps:
1. Unplug the power cord of the receiver from the outlet, and then plug the receiver back into the mains.2. Switch the receiver to the TV channel number 333 in the general list
3. After a few seconds, one of two messages about the need to update will appear on the screen as follows:
After the appearance of this message select "OK" to start the update.
4. Update progress.After agreeing to the update, service messages about the update process will appear on the screen. Receiver software update takes about ten minutes, module software update takes about five minutes.
5. Upon completion of the update, the receiver will reboot and turn on with new version ON. ATTENTION! For the receiver model GS C592, this will complete the update, since it does not require a module update.
6. For other models: after turning on the receiver, switch it back to channel 333 in the general list. Within one minute, a message will appear on the screen about the need to update the software of the second component. 7. When a message appears asking you to update the second component, follow steps 3-5 of this manual.After completing the software update, make sure the update was successful. To do this, go to the "Personal Account" application ("Menu" -> "Personal Account") and check the values in the "Receiver software version" and "Module software version" lines. The update was successful if the following information is displayed:
Third line: Receiver software version - 3.7.304
Fourth line: Module software version - 0.0.88
The figures below show the view of the Personal Account application for GS B520, GS B522, GS B521, GS B531M, GS B532M, GS B533M, GS E521L, C592 receivers after the update:
