Explay Fresh - smartphone firmware. Explay Fresh Firmware

Most owners of trendy smartphone phones or Explay smartphone operating room atom model Android system 4.2 with a color screen - 800x480 dpi, they think that it is impossible to change the firmware in these gadgets on their own, but they are deeply mistaken.

The reasons why you need to flash a phone, an Explay smartphone atom model on the Android 4.2 operating system with a color screen - 800x480 dpi, are very diverse: when the device completely refuses to turn on, if it spontaneously starts to reboot, you need to restore the software after unsuccessful installation or just wanted to install the most new version firmware.

Firmware Re-flashing smartphones Explay bit, onyx, alto and other models.

- You can carry out the firmware on your own on all phones of the phone, Explay smartphone atom model on the Android 4.2 operating system with a color screen - 800x480 dpi.

In addition to the topic of firmware on smartphones for android, there is a review article:. It tells in detail, there is a video instruction on how to reflash mobile device on the Android kit kat.

When should you update the firmware of smartphones, phones, Explay smartphones atom model on the Android 4.2 operating system with a color screen - 800x480 dpi and for other models:

If the phone does not turn on, although the reason may not be in the firmware;

If the phone is constantly buggy and reboots;

If done unsuccessful firmware and the phone must be returned to its original state;

If you want to install the next, the most modern version firmware;

Download firmwares, programs, flashers and Explay firmware.

Download free firmware for Explay phone from PC.

- manufacturer's official website cell phones Explay, for the following models onyx, alto, hit and others. By clicking on the link, you can enter the name and model code into the search and download software and firmware, for example, for Explay onyx, alto, hit, where you can also download RU, RP, software and driver to your mobile device for free.

Search software, first of all, you always need to carry out on the official website of the electronics manufacturer, there are always the most current and latest firmwares for the Explay x tremer phone with a screen color TFT, touch dpi and other models with different characteristics.

Explay firmware manual.

How to properly flash a smartphone. Instructions for the firmware on the example of the Explay n1, x tremer phone.

In the smartphone, go to Settings-> For developer and enable USB debugging.

We connect the USB cable from the phone to the computer and install the firmwares.

Disconnect the phone from the computer, turn it off and remove the battery.

Run the SP program on the computer Flash Tool, it is needed for filling new firmware on the phone.

In the program window, press the Scatter-loading button and in the window that opens, select the MT6589_Android_scatter_emmc.txt file (you can find it in the folder with other files of the new firmware). After opening, the program will contain all the paths to the files necessary for updating.

Be sure to uncheck the first item - PRELOADER (otherwise the phone will not boot).

Now we press the Download button. We answer "Yes" to any pop-up messages.

We connect the smartphone (with via USB cable) to the computer, the new firmware will start downloading into our device automatically.

At the end of the process, a window with a green circle will appear. You can disconnect your phone from your PC and turn it on.

More details on how to do this can be found in the video instructions:

To search for firmware on the Internet, you need to know the model of your phone that you will be flashing. You can quickly find out the phone model and its firmware version by dialing the code in the phone *#0000# .

Flashing instructions Explay n1, x tremer

One more example. Instructions for flashing Explay n1, x tremer mobile phone.

Firmware for Explay n1 phone, x tremer: download firmware for

Explay firmware n1, x tremer

Is not powerful tablet, however, this does not prevent him from enjoying the well-deserved popularity among the owners of this gadget.

Figure out how to flash or reflash your Explay N1 tablet yourself and quickly

Why buy an expensive tablet for a child if technology in the hands of a child is an even more problematic option than technology in the hands of a woman? It is stupid to be nervous about the prospect of the bitter fate of the tablet, but to protect yourself from serious financial losses you can just buy a tablet for your child Explay N1.

Explay N1 is a budget version of a tablet that does a good job basic tasks, however, like any other model, it can throw out an unforeseen "surprise" - to stop working stably, start to freeze regularly.

Eliminate these kinds of problems and breathe into the tablet " new life"You can simply reflash it. Everyone will be able to cope with the firmware, but not everyone knows how to do it correctly. If you are one of those who do not know anything about Explay N1 using a computer, then we recommend that you read this article to the end.

The better you prepare, the better the result will be. First, motivation is important in any business. Yes, Explay N1 - budget tablet, but you do not want to part with it.

With Explay N1, you can lead an active life in in social networks, and for this there is no need to sit day and night at the computer. It is much more pleasant to continue communication, comfortably sitting in an armchair or on a bed.

Thus, the Explay N1 tablet deserves to be taken care of and taken care of.

What is needed for the firmware

Before you start doing the main work on the firmware, you should take care of downloading and. In order for the computer and tablet to successfully connect and the PC "sees" the tablet, download and install the appropriate drivers.

V search bar write down the text, which should contain the word "driver" and the name (model) of the tablet. The search engine will quickly offer you download links.

Download the drivers, unpack them from the archive into separate folder... Now take your tablet and connect it to your PC using USB.

Make sure your device is fully charged before installing new firmware, but it's best to put it on charge and keep it plugged in throughout the entire process.

Launch Device Manager. If you did everything correctly, the computer will immediately detect the connected device. A new device named Android or Explay will appear in Device Manager. Click on it, and then in the dialog box that opens, go to the "Driver" tab. There you will see two magic buttons with which you can solve the problem.

First click "Update", and then click on "Search for drivers on this computer." If you specify the path where you just saved the unpacked drivers, then the process of preparing for the firmware will be significantly accelerated.

Since the drivers are installed automatically, you will need to wait a bit.

After the drivers are installed, download special program Livesuit. Livesuit will allow you not only to figure out how to flash Explay N1 through a computer, but also help you to correctly cope with the necessary steps.

Firmware selection

Unfortunately, even on the manufacturer's website you will not be able to find official version for firmware Explay tablet N1.

It is strange, of course, that the manufacturer does not want to technically accompany his products, but in this case he will have to look for a way out of this situation on his own.

Having visited specialized forums, you will be pleasantly surprised that there you can easily download custom firmware to Explay N1, while you can, taking into account the description, choose the firmware that you like.

Let's consider several firmwares for Explay N1.

Firmware from Yandex. will allow your tablet to "resurrect", but the likelihood that you will be satisfied with its performance is low.

A good option is firmware ported from EXEQ P-702... After installing it, your tablet will become noticeably faster.

Jelly Bean CookedRom v1.3aa is a kind of excellent firmware that has good functionality... In addition, by installing Jelly Bean CookedRom v1.3aa, you can use remote services Yandex.

Pay attention to FaaastJB v5. This firmware provides and lets you know how “fast” your tablet can be.

Installing the firmware

So, after spent preparatory work you can proceed to the main task - Explay N1 firmware.

Firmware replacement algorithm

Pre-downloaded program Livesuit install on system disk... Do not forget to move the downloaded firmware to it.

Click on the executable file of the program. When the first dialog box opens, click on the "Yes" button at the bottom, agreeing to further actions.

After starting, in the window that appears, click "Yes"

Now the program will ask you to select the update mode. We recommend setting the "Full installation" mode in order to make your life easier in the future.

If you set the mode complete installation, then in the future there will be no restrictions

After you have selected the update mode, the program will ask you to specify the path to save the firmware. After performing this action, the screen will display small instruction With brief description firmware procedures.

All processes are carried out automatically, and after the end of the firmware procedure, you will see the desired word "Complete". This means it's time to turn off the tablet by holding down the volume up button and connect USB cable, then press the power button 10 times.

Such simple actions make the PC quickly identify your tablet. Then you can release the volume button and agree with the proposal to update the tablet software. Then the program will offer you formatting the tablet, with which you need to agree by choosing full version formatting.

If you did everything correctly, then your tablet will reboot, and this will complete the firmware process.

We are sure that you were able to make sure of the simplicity of performing all the steps related to the firmware of the tablet. The main thing is not to be afraid and carefully study the instructions.

Those who wish to help the development of the project: qiwi wallet: +79205605843 Yandex money: 410012756457487 Firmware Explay fresh Android 4.4.2, How to flash Explay Fresh Android 4.4.2, how to flash Explay Fresh Android 4.4.2, how to flash mobile Explay phone Fresh Android 4.4.2, how to restore from a brick state Explay Fresh Android 4.4.2 To flash (restore) Explay Fresh Android 4.4.2 we need: Drivers - https://yadi.sk/d/5psY9ok5h6cRf Firmware - https: // yadi.sk/d/ikNao7XEh6cNe Flash tool - https://yadi.sk/d/Itxt03nah6cQC 1. Download the above files, unpack them into the Fresh folder, previously created in the root of the C drive: 2. Install the drivers 3. Run the SP Flash flasher Tool, select our firmware in the "scatter-loading file" field 4. Connect the phone, wait for our phone to be identified and the drivers installed. We disconnect the phone from the computer. 5. We connect our phone to the computer, remove the battery. 6. Click on the "Download" button and wait until the screen displays "Download Ok" 7. Disconnect our phone, insert the battery 8. Press the "Volume +" and "Turn on the phone" keys and hold until it appears on screen picture of Android 9. Press the "Turn on the phone" button and enter the recovery menu 10. Move through the menu using the "Volume +" and "Volume -" keys and select the item " wipe data / factory reset"and confirm by clicking on touch key in the lower left corner 11. In the next window, using the "Volume +" and "Volume -" keys, select the item "Yes - delete all user data"and confirm by pressing the touch key in the lower left corner 12. Next, use the" Volume + "and" Volume - "keys and select the item" wipe cashe partition "and confirm again by pressing the touch key in the lower left corner 13. Then select the item" reboot sysytem now "and confirm by pressing the touch key in the lower left corner 14. That's it, our phone is ready for use))) Our page on Vkontakte: https://vk.com/kb.club May you have great happiness and may you be with Great joy to you)))) In the name of ALTa, CTRLa and Holy DELa))))) My affiliate program VSP Group. Connect! https://youpartnerwsp.com/ru/join?60387

How to flash Explay?

Many users are interested in how to flash Explay. "Flash Smartphone" means to update its software. In this article, we will look at two ways to flash an Explay Fresh smartphone: using the SP Flash Tool and using TWRP Recovery.

Preparing for flashing a smartphone via SP Flash Tool

SP Flash Tool is computer program designed for flashing smartphones based on the MTK processor. Before flashing, save all the data you need from the phone memory to the SD card, since absolutely all data will be deleted during flashing.

Downloading drivers

It is necessary to install on the computer drivers that are available only for the family of Windows operating systems. To download drivers for WindowsXP, WindowsVista and Windows 7, follow this link. If you have an operating room Windows system 8 or Windows 8.1, download this driver.

After downloading the drivers from the official Explay website, open the archive with the drivers, open the file "USB VCOM Driver.rar" in the archive. Unpack the contents of the file to your desktop.

Launching the program

1. Open the "Add Hardware Wizard" in your operating system.
2. Open the "Start" menu, enter hdwwiz in the search box and press "Enter" twice. In the window that opens, select "Hardware Installation" -> "Selected from the list manually" -> "Next" -> "Show all devices" -> "Next" -> "Install from disk".
3. Click on the "Browse" button and specify the path to the drivers. In our case, we indicate "Desktop" -> "USB VCOM Driver" and select the folder with the name of your operating system... Each folder contains two files. We select the file depending on the bitness of your operating system.
4. Click on the "Open" button and click on "OK". Select the first driver in the list and press "Enter" twice.
5. After successful installation of the driver, click on the "Finish" button.

Download SP Flash Tool

First of all, download the SP Flash Tool from this link. SP Flash Tool is a program for flashing phones based on MTK processors. Using this program, you can also flash another phone.

It is needed if the device does not turn on, or the original software has ceased to function. Updating the software will help if your device is slow or slow to load. In other cases, it is better not to perform any such manipulations with the device. As long as the device works stably, there is no need to experiment with it.

It is quite easy to change the firmware (Firmware). To do this, you do not need to understand technical features Explay navigator... But if you do something wrong, the gadget may become unusable. Therefore, reinstall the software only as a last resort.

You need a computer, the supplied USB cable, and a microSD card (at least 2 GB - size depends on how much memory the Firmware uses). PC connection may be required.

Before reflashing your Explay navigator, do the following:

Firmware via computer

Here's how to flash your Explay navigator using a computer:

1. Turn it off.
2. Unpack the directory with Firmware on your PC (you need to download it in advance). The folder name should not contain Russian characters and spaces.
3. Connect your navigator to your computer using USB-microUSB cable... If you have not connected the device to a PC before, the drivers will be automatically loaded. If the system does not find them, you can specify the path to them.
4. Go to the directory where the firmware is located and start the installation (double click on the executable exe file).
5. Follow the instructions of the installation wizard.
6. If it doesn't work, try doing the same by turning on the device.

Each device has its own Firmware. If you try to download the software designed for the Explay SLS7 to the navigator of the SLK5 model, nothing will work. And this is in best case... Most likely, the gadget will simply break.

Not worth installing unofficial applications if you are not sure if they are working properly. Programs developed by enthusiastic users can be useful. But sometimes such software gives errors. Even one "broken" file can lead to problems.

Firmware via SD card

Here's how to install the firmware on Explay SLS7 navigator and other models:

After that, you can upload programs to Explay.

1. Turn off your navigator.
2. Insert the SD card into it and turn it on again.
3. The device should automatically install the software. But sometimes for this you need to press certain keys... It depends on the model (SLS7, CTS5, ND-41, Onliner, and so on). Detailed instructions should be in the instructions.
4. Do not restart Explay while it is downloading. In some cases, it is not displayed in any way.
5. To prevent the device from being discharged, connect it to the power supply. It shouldn't take too long. The battery will not have time to run out. But it's better to play it safe.
6. After the update, you will have to re-enter the keys for the programs.

Calibration

Explay firmware can "knock down" the screen calibration parameters. Here's how to restore them:

1. Pinch left top corner display.
2. Or place your finger in the middle of the monitor and simultaneously hold the power button to the right.
3. After 30 seconds, the calibration menu will appear - a cross on a white background. You need to "hit" it with a stylus several times.

Re-flashing the Explay navigator will help if there are any problems with the device. Updating the software will make it more efficient. Installing new Firmware is easy enough. But if the device is working fine, it's best not to reinstall anything.