Dtv channels on lg. Setting up digital channels on your SMART TV

Automatic channel tuning on LG TV

Manual channel setting on LG TV

If you are faced with the question of how to set up channels on an LG TV, then we suggest you use our step-by-step instructions with photos and videos. Broadcasting of channels is carried out through a satellite dish, the Internet or through a cable connection. With the help of the remote control, hereinafter the remote control, you can make all the necessary settings.

Setting when turning on your LG TV for the first time

If you just purchased an LG TV, then it is important to set parameters such as the country and language in which all system content will be displayed the first time you turn it on. Also, if your device supports modern Smart TV technology, then you still need to create an account for the possibility of further manipulations.

Automatic channel tuning on LG TV

In order to tune the lg TV, you can automatically search for channels. To do this, go to the menu of your TV through the remote control by pressing the appropriate button and go to the settings item.

Click on the auto search tab we need and select the item that matches your TV connection, i.e. It can be cable or satellite. Next, select instead of the default quick search - full and click OK and Run.

Now the LG TV is automatically searching for channels and you need to wait about 5 minutes and then exit the menu settings mode.

Tuning channels with manual parameter selection

To save your time, you can contact the LG TV repair shop, where competent specialists will quickly solve your problem. To manually tune the channels yourself, you need to go to the LG TV menu through the remote control to the settings item and select the manual tuning mode.

After the TV finds channels at this frequency, in this menu tab there will be a message with information about how many were found. Next, set the frequency to 178000 without changing the speed and modulation and also search. Then you search at frequencies 186000, 194000 kHz and so on, in steps of 8, i.e. 202000, 210000 kHz, adding more and more programs. When you're done, just exit the menu mode and that's it, the manual setup is done!

How to tune channels on LG Smart TV

The current generation of LG TVs with the Smart TV function gives great opportunities for content to its owner. In order to tune in channels on your LG TV via Smart TV, you need to have an account and an Internet connection in any way available to you. Install the dedicated SS IPTV application. Thanks to this application, icons of various channels will appear on your TV screen, by selecting which and activating them with the Ok option, you set them by sorting.

That's actually all the basic methods for setting channels for an LG TV.

Owners of LG TVs equipped with the smart TV function can view channel packages via the Internet without connecting additional equipment, for this they only need a wireless connection and, of course, the TV itself. Naturally, the technician will first need to correctly configure and install all the required programs already stored in its memory. Below we will consider in detail how you can independently do these simple manipulations.

How to start using smart TV?

• First, connect your TV to an internet connection;
• Open the menu by pressing the button of the same name on the remote control;
• Go to the menu sections in this order: settings - network - the name of your connection - update;

After that, perform several sequential operations using the control panel, namely:

• Register;
• Install all necessary programs and widgets;
• Start browsing;

In order not to make unnecessary mistakes during setup and connection, we will consider each of the above steps in more detail.

Setting up the connection and connecting the TV to the Internet

For a wireless connection, you will need an access point, which is used as a wi-fi router, a router that transmits a signal to the TV receiver and provides it with an Internet connection. The router can be replaced with a laptop or laptop computer, this technique is equipped with a built-in adapter, which allows it to act as an access point.

So, the presence of an Internet connection is the main condition for work, while the Internet is either wired or connected through a router, therefore, USB modems from mobile operators will not work for you.

The TV is connected to the Internet connection using one of two methods: via cable or via WiFi. Which of the methods to choose - decide for yourself, but we note that in both cases the TV works fine.

Connection via cable

When choosing this method, you will need to connect the Internet cable to the connector located on the back of the TV receiver. If you have only one computer connected to the Internet, it is recommended to purchase a special splitter to which the Internet cable is connected - in this way, the Internet can simultaneously work on both the computer and the TV. Connecting a splitter is not difficult - one of its outputs (LAN 1) is connected to a computer using a network cable, and the other (LAN 2) is connected to a TV receiver.

Now you need to set up your TV. Grab the remote and follow the steps below:

• Press the Home key and enter the menu;
• Go to the “Settings” section, then to “Network”, then to “Network connection”;
• Then select the "Set up connection" button and go to the "List of networks".
• Then you will need to go to the “Wired Network” item, press the “Refresh” button, and wait for the connection message to arrive. When you receive this message, press the Done button. Connection completed successfully.

Connecting via Wi-Fi

To connect the TV to a Wi-Fi network, you will need to sequentially perform the following manipulations:

• Press the "Settings" key on the remote control;
• First, go to the “Network” section on the TV, and then to “Connect to a Wi-Fi network”;
• Then you will need to select your wireless network and press the “OK” button on the remote;
• Enter the password and click on the “Connect” button.

The appearance of a mark next to the name of the Wi-Fi network will be a signal of a successful connection.

To start using smart TV technology, you will need to press the “Smart” key on the remote control. A list of applications will appear at the bottom of the TV screen, from which you can select the ones you like and launch them by pressing the “OK” key.

If the applications from this list are not enough for you, you can add new ones by pressing the “My Apps” button on the remote control, and then select the “LG Store” application that appears on the TV screen. Available applications will immediately open in front of you, from which you can choose and then install the one you like and suits you.

Account registration

However, for the full operation of smart TV, only a connected and configured Internet connection is not enough - you will also need to register a personal user account on the LG website. Registering an account will help you get at your disposal all the available functionality of smart TV.

Registration is a fairly simple process that takes a minimum of time. So, to register you will need:

• To get started, enter the television menu;
• Find the account login key located at the top of the screen;
• Click on the registration button;
• After reading the user agreement, click "Agree";
• Enter your exact email address, and then press the authentication key. After a few moments, an email containing a registration confirmation link will be sent to the address you specified;
• Enter your chosen password twice;
• Click "Register" and check your email - a confirmation letter should come to your inbox. Open this email and follow the link in it. Remember - this letter may not be reflected in the inbox, in this case go to the Spam folder, it is quite possible that it automatically ended up there.

If all of the above points are successfully completed, you will find an email on your page, upon receipt of which you should check your email again. In the received letter there will be a link called “Complete registration” - follow it. After that, you will be automatically redirected to the LG website, where a message will already be waiting for you confirming the successful completion of the registration process.

Beginning of work

To enter your page, use the "Login" button located at the top of the screen. You will then need to enter your password and your email address. In order not to repeat these manipulations at each login, you must check the box "Stay signed in". In the dialog box that pops up at this moment, press the "No" button. Now the setup is complete and you can fully enjoy all the features offered by smart TV technology.

Let's call the correct language setting the main thing. Choose Russian. Otherwise, the question of how to set up channels on the TV will become much more complicated. The agreed item is usually proposed to be changed when you first turn it on, it is even more likely that the store has made preliminary settings. First: if the TV menu is in non-Russian, it does not mean that the equipment cannot be set up correctly. This is where the setup starts.

Setting up channels on Samsung TVs

Let's start. Set up Samsung TV channels. Go through the menu to TV mode. Set the playback source option to the desired state. The event is performed by the Source key of the control panel, optionally the desired one is selected through the built-in menu. Example values:

• HDMI;

The TV is switched to the desired TV mode, open the main menu. Find the sub-item Channel, move the cursor. A popup will appear listing the lengthy process of setting up Samsung TV channels. Select Antenna, you will see - possible signal sources are indicated:

1. Satellite television.
2. Cable TV.
3. Terrestrial broadcast.

Check the box for the desired item according to the method of receiving the provider's channels. Let it be presumably a terrestrial broadcasting antenna. The next step is choosing a country. You will need to enter a secret pin code. If one is lost (forgotten by the dealer), call Samsung technical support. Or try entering 0000 (four zeros), be careful. Do not strive to find Russia in the list without fail. According to Smart's technical data, the desired sub-item is Eastern Europe. The broadcast standard will depend on this. In addition, you will need a pin code to set up parental controls.

Digital, analog channels are made in the form of bookmarks. Schematic allows you to select the same settings for all types of broadcasting at once. Follow the advice. On the digital channels tab, in the country column, set Others. Then it will come in handy when receiving satellite or cable broadcasting. The next step is to select the type of setting. Samsung has automatic and manual. The first one is simpler, it takes place without the participation of the operator, along the way, the old list of channels is deleted. Be careful when choosing options.

After confirming the setup method, the TV will prompt you to decide on the types of channels:

• digital;
• analog;
• combi (digital plus analog).

Continuing, the TV user will be taken to a gradually filling scale, progress is gradually indicated as a percentage, the number above is the number of channels found. The TV will complete the setup procedure itself. Give the machine the necessary time to search.

When setting up the cable, select the option instead of the antenna as the first step. In the cable search parameters, put the numbers carefully dug out by the authors:

1. Starting frequency 346000 kHz.
2. End frequency 410000 kHz.
3. Transfer rate 6956 kS / s (kilosample per second, kilosymbol per second).
4. Modulation 256 OAM (Quadrature Amplitude Modulation, QAM).

After the search, the number of channels found on the cable is indicated. The next challenge is sorting. The TV will find a billion channels, but only limited to a paid package will show. To remove the excess, visit the Channel Manager. After entering, select the desired program, various actions will become available. In this case, select Delete. Channels can be sorted with the C button.

Setting up LG TV channels

Little surprise to learn: LG TV has similar options. To decode digital broadcasts, as before, you will need a special DVB-C (DVB-C2) receiver. Accordingly, the first and second generations of the standard. You can check the availability in more detail by studying the passport of the device, looking at the characteristics, surfing the Internet. Devices that support digital reception have a pay channel decryption card slot. It usually looks like a vertical slit that cut through the side of the TV.

Now we figured out the basis, let's move on to the main rams. To tune channels on your LG TV, explore the main menu. Agreed - the language was chosen earlier. The Options section allows you to set the country. For BCS, click Finland. The next section is the Search. If you want the TV to make the settings automatically, take the trouble to specify the signal source (Cable).

On TVs with a digital receiver (see two paragraphs above), you can set the board settings. BKS - frequency 690000 kHz, transmission rate 6750 kS / s, modulation is the same as on Smart TV. Generally speaking, related parameters are easy to find out from the provider. If in doubt, call the support service, ask a neighbor. We leave the initial and final frequencies of the search by default: 114000 kHz, 862000 kHz. Typical parameters of modern broadcasting.

Setting up TV channels

LG starts by looking for digital channels, and the last line will find analog. When the setup is complete, the message Auto setup completed will appear. To watch paid channels, you need to buy a protected content decryption card (see the beginning of the subsection). Even the TV is deprived of the most valuable part - the built-in receiver - the provider is usually happy to provide the device on a rental basis (other conditions). For more information, ask the offices of the city of residence. The receiver is connected to the TV, bypassing SCART or a typical "tulip".

Philips TV channel setup

Philips TVs are nothing special, set an arbitrary European country in the settings. Otherwise, get the probability of unsuccessful digital broadcasting. Otherwise, the choice is the same: satellite, cable, air. Check the desired option, start the search. It is also necessary to make sure that there is a receiver for receiving digital television. In our opinion, it is much more interesting to study the Smart TV function, with which you can watch movies online for free. True, you need to establish an Internet connection.

What is a TV today, devoid of the global web? The software is updated by a central server. The new generation of TVs is controlled by smartphones, it is possible to connect a wireless mouse, keyboard. Modernization, if it does not equate a TV with a computer, makes the first an excellent means of displaying graphic information. Remember: in the womb of most devices there is a hard drive. The desire of manufacturers to remain unsinkable dreadnoughts of the ocean of digital technology is becoming clear.

Previously, a TV was a mandatory attribute of every apartment, today more people prefer personal computers. Online games are especially popular. So Philips TV gives a chance to have fun, we believe that in the current realities it will not be possible to play tanks. It is possible to connect a game console and enjoy the exorbitant diagonal of the TV.

One player, torn from the monitor by his mother, killed a relative. Doctors consider online gameplay potentially dangerous. The negative impact of interest in virtual reality on the family budget is undeniable.

To set up channels on your Philips TV, start by specifying your country, then select a source, then you can configure the rest of the settings. At times, you have to manually enter data on the frequency of the wave, the transmission rate. The maxim applies mainly to cable and satellite television.

Tuning Sony TV channels

When you turn on the TV for the first time, you will be prompted to select a language - install Russian. The next step is to enter information about the country. Eyewitnesses recommend to put Russia. The TV will ask for a pin code. The sequence of numbers in the future will need to be entered by changing the settings. Sony TVs often offer a choice of mode between Home and Store. Only in the first case, the control buttons will be available in full. Choose Home.

Leave the location type as Table Stand, continue with channel type selection. It is recommended to immediately specify Digital and Analogue, in the future, avoid problems with the search. The TV has several pre-configured operators, it is highly likely that the one you need will not be in the menu. Choose Other. Sony TV usually promptly after offers to be puzzled by the search. Agree. It's better than having to rack your brains later on how to set up channels on your TV.

Programs are sorted through the Settings menu. Compliance with broadcast and TV standards is important. If the provider has got hold of the equipment of the second generation of cable broadcasting (DVB-C2), it is unlikely that there will be any sense from the old TV. Get ready to get an external receiver of the desired format, which is connected instead of an antenna. Let's say more, setting up satellite channels is almost always done through the provider's equipment. In advance, the receiver is flooded with a broadcast plan, according to which the search and broadcast are conducted.

Now readers will be able to tune channels on the TV, regardless of the brand. Whether it's Sony, Toshiba, Panasonic, success will come immediately. The advantage of the TV in the wide diagonal of the screen. Today the device is positioned as a home entertainment center. Home theater is usually called the brain. Without a full-fledged image, the acquisition of TV would completely lose its meaning.

As a rule, all modern TVs have quite pleasant and convenient picture settings that most users, in general, never change. In most cases, the default settings are indeed optimal and provide quite tolerable image quality. However, there are situations when the factory settings do not allow you to fully enjoy the picture of a movie, video or program. Then there is a need to set your own parameters. But how to do that? In this article, we will figure out how to set up TV images. Let's get started. Go!

Modern TVs have quite pleasant and convenient picture settings.

Let's start with the picture modes that are in every modern TV of any brand (LG, Samsung, Philips, Sony, and so on). There are at least three of them:

• Standard;
• Dynamic;
• Movie.

In almost all models, the best picture is provided by the "Cinema" (or "Cinema") mode. In this mode, gamma and brightness are the most pleasing to the eye, especially when watching movies or TV shows in the dark.

As for the correct color temperature, it is best to set the mode to "Warm", since, as a rule, it is closest to the standard value of 6500 K. Some models have several options for one color mode, for example, Samsung TVs: "Warm1" /"Warm2". Here choose which one you like best, but usually the second option is the most pleasing to the eye.

If you set the TV picture settings yourself, we recommend that you turn off all functions and modes of automatic TV picture adjustment. These are parameters such as:

• dynamic contrast;
• Energy saving;
• Light sensor;
• Dynamic lighting.

All this is desirable to disable and not use.

Basic settings

Now let's deal with one of the key and most important image parameters, namely contrast. If contrast is considered to be the ratio of the white field level to the black level, then on TVs you will only adjust the brightness of the white field, in fact, this is the level of maximum brightness of the picture. If you have a plasma panel, then it is best to adjust the contrast with the lights off. Open an image with a white level window on the screen. You can download it from the internet. Then set the contrast value close to the maximum, and start to gradually reduce the contrast until the picture with the white level is the most pleasing to the eye.

Samsung TVs have a "cell brightness" item - it is he who most affects the overall brightness.

If you have a liquid crystal or LED screen, then everything is done in the same way, only a different parameter is used here - “backlight brightness” or “backlight contrast”. This difference in names is associated with the excellent device of LCD and LED TVs from plasma panels.

Please note that if the image is too bright, your eyes will tire much faster.

While "Contrast" adjusts the white level, "Brightness" adjusts the black level. To correctly adjust the brightness level, you will need a "Plugepattern" picture. Download it and open it on your screen.

If you are interested in setting up smart TV on LG, check out the simple and understandable instructions. Smart TV is a technology available to all Internet users that allows you to significantly increase the number of TV channels and programs. In order to connect to your LG Smart TV, you can use 2 methods:

1. Using a wire to connect to the Internet.
2. With WiFi.

Wireless connection is not available to everyone. To use it, the TV must have a certain function.

If the wire for connecting to the Internet is already in use, you will need a special splitter - a switch. After purchasing the switch, you need to connect the main wire to it. Connect the LAN1 output to a connector in a computer or laptop, and connect LAN2 to a TV. Turn on the TV and set up Smart TV according to the instructions.

Setting up the TV is quite simple:

1. Select main menu.
2. Open the home panel (Home button).
3. Click on "networks".
4. Select "network connection".
5. A menu will open showing 2 ways to connect Smart TV LG.
6. Click on "customize".
7. Select "list of networks".
8. Click the wired network button.
9. Update everything.
10. Wait a few minutes. A panel will appear notifying you that an Internet connection has occurred.

In the event that the TV has a password for accessing the main settings, you must enter it before updating the settings.

Connecting via Wi-Fi

The instructions for connecting via Wi-Fi are almost completely identical to the above.

1. Open the main menu.
2. Open the main panel (Home button).
3. Select the networks tab.
4. Select "network connection".
5. You will be prompted to choose one of two ways to connect Smart TV to LG.
6. Click on "customize".
7. Click on "list of networks".
8. Select the "wireless network" button.
9. Click on the "update" button.
10. Wait a few minutes. An inscription will appear indicating that the connection was successful.

Reboot your computer and TV, this will ensure that the system works perfectly without failure.

Register LG Smart TV

We figured out how to connect an LG TV to Smart TV. The fact that this is necessary to expand the list of channels was also found out. Now let's deal with registering an account.

Account registration takes place in the corresponding TV application. If registration is not completed, the following services cannot be used:

• installing widgets;
• installing applications;
• selection of films or programmes.

Setting up registration is easy. This takes no more than 5 minutes. So, answering the question of how to set up smart TV on any LG TV, we talk about registration:

1. Open the main menu on the TV.
2. Please note that there will be an entrance in the upper right corner of the screen.
3. Register or enter the required data.
4. Read the user agreement.
5. If it suits you, then agree with it.
6. Enter your email address.
7. Check the authenticity of the email.
8. Enter the password twice.
9. Connect the service of receiving news to your E-mail.
10. Register in the system.

As you can see, installing smart TV is easy. This TV gives you almost unlimited possibilities! Finally, we will give you a couple more tips for registering:

• Please use only your real email address. After all, he will receive a letter that will help complete the process;
• if the letter has not arrived, check your spam folder;
• in order to log in, use the login at the top right of the screen;
• enter your email address and password to log in;
• check the box next to "stay logged in". Then you no longer need to enter an E-mail and password;
• if you are asked to enter more information, additionally, select "no";
• IPTV setup completed.

Installed smart TV at your disposal. Use it and enjoy!