Refueling of hp cartridges. Is it possible to refill the cartridge that comes with the kit

HP printer owners have another way to save on supplies. Usually, all original cartridges from this manufacturer can be refilled manually. This manual is suitable for refilling HP Deskjet Ink Advantage 3525, 3625, 4615, 4625, 5525, 6525, DeskJet 3070A, C5383, B109C, CN216C, CN245C, B8553, C309A, Photosmart 7510e (C311a), B8550, C5324, C5380 C6324, C6380, C6383, D5460, D5463, D5468, D7560, C309g, C309h, C310a, C310b, C310c, C309c, Officejet Pro 6230, 6830 and others on HP 178, 655, 920, 934, 935, 903, 907 cartridges.

Prepare:

• compatible inks (do not use “multi-purpose ink”), your printer uses pigment black combination dyes and water based colors ():
• inexpensive InkTec ink (South Korea) - use H7064 or H5088-H8940 ink
• expensive OCP ink (Germany)
• syringes according to the number of flowers with a volume of at least 5 ml. each,
• several napkins.

Note that there are other filling methods (for example, through the top air port), but this one is the easiest.

1. First stage

We take out the cartridges from the printer, prepare everything you need. Do not leave the printer without cartridges for more than 5 minutes, so that the ink does not dry in the print head (you can remove the cartridges for refilling one by one or install other cartridges).

2. Let's start refueling

We turn the cartridge with the nozzle to the top and put it on a napkin. We collect ink into the syringe, about 4-5 ml. Slowly insert the syringe needle about 2 cm deep into the cartridge filler (rushing to puncture will reduce the service life of the absorbent filler). It is possible not to inject the syringe into the material at all, but drip from above, waiting for each drop to be absorbed.

It is more convenient to refuel in a special one, which will hold the cartridge and collect the ink that has flowed out through the air hole.

3. Fill in ink

Very slowly we squeeze the contents of the syringe into the cartridge filler: so that it has time to soak. If ink starts to protrude back, it means that the absorbent filler is full and approximately 0.5 ml needs to be pumped out. dye back into the syringe and stop refilling. If you do not do this, excess ink will leak into the printer during installation. ... During refueling, a slight outflow of ink through the air hole of the cartridge is allowed (it will be absorbed into the napkin).

4. Finish refueling

We take out the syringe, wipe the cartridge with a dry napkin or cloth, including the chip.

When installing a cartridge in a printer, you need to pay special attention to the cleanliness of the chip: if you stain it with ink, this can damage the electronics.

When installing the cartridge, the printer will inform you that “used cartridges are installed, or not HP”. You must agree with this message, then the printer will warn that “it is canceled from the warranty, and HP is not responsible for the print quality”. You also need to agree with this message. In the future, the level of ink in the cartridges will not be displayed; you need to monitor the fullness of the cartridges yourself.

If the printer was originally set to protect against theft and counterfeiting of cartridges, then the printer will not work with refilled cartridges. Before starting refueling, in the driver settings on the computer.

Video instruction

Using your printer or MFP will gradually consume toner. One fine day, the paint ends altogether. As a result, the question arises of how to. To do this, most users contact the service. However, do not forget that you can do this procedure yourself.

In fact, there is nothing complicated in refilling laser cartridges. It is enough to understand what needs to be done and in what order. Therefore, we will introduce you to the detailed instructions, where we will tell you how to properly charge the cartridge:

1. First you need to. This is not difficult. For example, you can use the instructions that came with your device. In addition, many printers and mfp models have cheat sheets describing how to remove the cartridge.
2. Next, you will need a table on which you will carry out the refueling. You need to lay an oilcloth or newspaper on it. Also prepare a clean rag, screwdrivers, tweezers, and pliers.
3. First of all, we disassemble the cartridge. To do this, unscrew the screws holding the side covers. Then, using a flat screwdriver, pry and remove the metal clips (arms) that held the photosensitive drum. By the way, on many cartridges the retainers are different, so remember which side one or the other was installed on.
4. Next, we take out the photosensitive drum. Do not touch it with your hands. It is best to use a cotton cloth. By the way, then the drum unit must be immediately removed to a dark place. You cannot keep it in the light. Be extremely careful - the slightest scratch on the light-sensitive drum and print quality will deteriorate.
5. Also, when refueling and cleaning many cartridges, you have to remove the charge roller. It is similar in shape to an imaging drum, but its surface is covered with special rubber.
6. Now the "dirtiest" work begins. You need to use tweezers or the same awl to separate the special pins that connect the halves of the cartridge. Sometimes they are difficult to spot right away. Some manufacturers fill the pins with plastic. In this case, it will need to be cut off in order to grasp the pins with small pliers or tweezers.
7. Once you disassemble the cartridge, some toner will spill out of the cartridge. It is not worth using such toner for further refueling, because it contains a lot of debris and small particles of paper. These can damage the drum unit.
8. We clean all the components of the cartridge from the adhered toner. Includes both a waste toner bottle and a dispensing blade. You can use a napkin or brush. Finally, it is a good idea to wipe everything down with a lint-free cloth. Some even remove the old toner with a vacuum cleaner.
9. After cleaning the cartridge, we collect it. Do not forget to replace the drum unit and charge roller. This completes the cleaning of the cartridge. Let's go to the gas station.
10. Most laser printer cartridges have a plug on the side. By removing or unscrewing it, you get access to the hopper (container) for filling toner. In other models, the dye is poured into a special slot. The main thing is not to overdo it with the amount of toner. You can't have a lot of it. The best option is to fill the toner compartment to 80%.
11. It is important to hold the cartridge correctly when adding toner. As a rule, you need to take it vertically and press the magnetic shaft against the body with your fingers. This prevents toner from spilling out through the gap that appears.
12. Be sure to shake the cartridge to distribute the toner evenly inside the cartridge. By the way, it is convenient to fill in the coloring matter using a funnel made from a regular A4 sheet.

What is important to know?

If you are poorly versed in technology or do not like such scrupulous work, then it is best to contact the service center, where you will be refilled a cartridge for a small amount. Also, do not forget that there is no universal toner suitable for all devices. Therefore, you need to find out what ink is used on your printer model.

Another important point is related to the fact that some cartridges have a special chip (for example, the latest models of printers and mfp hp, samsung, etc.), which monitors the level of ink or the number of printed pages. Refueling such a cartridge at home will not work. At least for the first time. The easiest way is to contact the service center, where all the readings of the chip will be reset to zero or a new one will be installed.

How many times can a cartridge be refilled? Its service life is usually limited to a few fillings. However, if you regularly clean it, which we described above, then the cartridge may be enough for several years of active operation.

Some users practice a different method of refilling the laser cartridge. To do this, they do not disassemble it and do not clean it. Only a special hole is drilled through which toner is poured. Then it is simply sealed with a strip of tape. It is not recommended to refill the cartridge in this way. After all, this does not clean up debris and waste toner. As a result, the cartridge quickly fails.

Precautionary measures

It is important to remember that toner used to refill printer cartridges is quite toxic. It contains such harmful elements as lead and cadmium. Therefore, do not allow the coloring matter to get on the skin, and even more so in the respiratory tract. Refuel the cartridge only with rubber gloves and a protective gown!

In addition, it is advisable to carry out all work in a well-ventilated area where there are no children or pets. It is best to wear goggles over your eyes and protect your nose and mouth with a respirator mask. Be careful not to spill toner.

Often a small amount of toner gets on your hands when handling a cartridge. Nobody is immune from this. Even the tidiest craftsman. In this case, it is enough to wash off the toner with warm (but not hot!) Water and soap.

Dear users of office equipment! If you need to order a refueling or repair of a Samsung printer, etc., the MosGorZapravka company will provide its services with high quality and urgently. We have the cheapest recharge of cartridges by bank transfer (by bank transfer). Including chip ones. Are you looking for where to refill and how to do-it-yourself hp cartridge? No instructions will help you to make a high-quality restoration of cartridges and urgent service of office equipment in Moscow in the office or at home. As a rule, after self-refilling, the cartridge prints poorly and smears. Restoration should be done by a foreman, refueller with experience. A specialist from our express service will make a visit to the office very urgently. Our service center sends only specialists with extensive experience to refuel and repair cartridges. The price list for refueling laser cartridges and the price will pleasantly surprise you. There are only good reviews about us in the internet. Our customers know that with delivery, on-site refueling of cartridges is cheap and inexpensive. How much it costs - you can see the price list. It lists the cost of refilling color and black cartridges for the printer. Prices are reduced. We have sales of new original and compatible cartridges. They turn to us to charge laser copier printers and MFPs HP laserjet Canon Samsung ml scx Xerox, a little less often Brother and Kyocera. In comparison with us, any private technician refueling on site is more expensive, longer and of lower quality.

With the departure of the master, we serve the following addresses:
SVAO VAO YuVAO YuAO - we mainly refill canon cartridges (canon)
CJSC CJSC CJSC South-West Administrative District - mainly refueling such cartridges as Samsung Brothers and Copiers

In the North-Eastern Administrative District our addresses on the map are located near Babushkinskaya metro, Medvedkovo metro, Sviblovo and VDNKh. And our points for refueling cartridges in the Central Administrative District are located near the Kurskaya metro telephone and the address is indicated. Our workshops in Moscow are at the Krasnye Vorota metro station Rimskaya Ilyich Square Kitay-gorod Komsomolskaya Baumanskaya Sretensky Boulevard Taganskaya Paveletskaya Aviamotornaya Electrozavodskaya - refueling a cartridge at these metro stations will be inexpensive and urgent. Our requisites are on the site. We work seven days a week - we leave on Saturday and Sunday.

our clients

This cartridge is widespread because it fits the popular models of HP DeskJet 1000, 1050, 2050, 3050 devices, and is also quite durable - the black cartridge can be refilled up to eight times, the color one about five. The process itself is not complicated, and does not cause any particular difficulties - you can refill the HP cartridge at home yourself.

First of all, you need to purchase the appropriate ink, be sure to have the inscription "HP 122" on the label and four medical syringes with needles. The volume of the black cartridge is 10 ml, the color ones are 3 ml each, so we collect the corresponding amount of paint in each syringe. You can also use one syringe, refilling ink in turn, but in this case, after each use, it must be thoroughly rinsed with distilled water and be sure to dry.

Then we proceed to the filling itself. Remove the protective film from the top of the cartridge to gain access to the fill ports. It should be clarified here that there is an old and a new model of a color cartridge, and in them the camera with yellow and red ink is swapped. To quickly determine where the paint is, you can use a needle by dropping it a couple of millimeters into the filler hole. Then we rinse the cartridge head with distilled water and you can start pouring the paint.

The HP 122 color and black ink cartridges have refills that need to be remembered.

When refueling a color, it is important to follow the sequence exactly: first yellow, then red, and last of all - blue. We lower the needle into the hole by 3-5 mm and slowly begin to inject the paint, focusing on 15-20 seconds for each milliliter. As soon as ink drops start to appear from the filling hole - the chamber is full, move on to the next one. After refueling, wipe the holes with a napkin and glue back the protective film. You can also use duct tape.

The black cartridge, in addition to the main camera, has an additional one at the bottom, which must be filled with paint, otherwise air will accumulate there and problems with printing will arise. To fill it, you will have to make a slight effort and pierce the cleaning filter with a needle. The easiest way to do this is to insert the needle into the hole at a slight angle. After these manipulations, we repeat the procedure with a slow injection of ink, followed by gluing the protective film.

Everything, the cartridges are filled and ready to use.

Many of us rightly decide to have the HP 122 at home. The main reason is that this consumable often has the same cost as a new inkjet printer. In addition, each manufacturer puts a certain resource into the cartridge, exceeding one refueling cycle several times. Therefore, you can safely try to refuel it yourself, saving a decent amount.

So, the HP 122 cartridge is suitable for four devices: HP Deskjet 1000, 1050, 2050, 3050. The black (black) version of the hp 122 works properly for 8 refills, and the color (color) - about 5.

To first you need to prepare yourself a place and some auxiliary items. The procedure does not require any special and special knowledge or skills. Moreover, the purchase of a special tool is not required.

Prepare your work surface in advance. For example, a desk will do by removing unnecessary items from it. It is a good idea to lay a few sheets of paper or newspaper on top, preferably in several layers. So, if paint spills on the table, then you will protect the surface and other things.

In the process of refilling the HP 122 cartridge, the following will come in handy:

• ink (up to 10 ml for black and a maximum of 3 ml of each shade in color);
• the cartridge itself, which must be refilled;
• medical syringes with needles (one for a specific color);
• paper towels (or napkins) and cotton pads;
• rubber gloves can be worn if desired.

Refilling instructions for HP 122 color cartridge

• We take out the cartridge and free the holes for refueling by removing the special label. You can just use a knife. It is important to remember that the color version of the HP122 comes in two flavors. They differ in the location of the filling holes for yellow and red. Determining which option functions in your printer is not so difficult. You can press the cartridge from the side of the print head to the toilet paper and see from the print where and what ink needs to be poured. Some people prefer to use a syringe to locate the filler hole. By lowering the needle, you can see what color it is colored or pump out the ink a little into the syringe.
• We wipe the cartridge nozzles with a damp cloth or a piece of cloth soaked in clean water.
• We fill all 3 syringes with ink. This must be done carefully and slowly so that air does not get inside or foam with bubbles does not form.
• Pour ink into the filling holes. It is important to follow the order: first yellow, then red and most recently blue. We lower the needle into each hole at a distance of 2-4 cm, the main thing is not more. The optimum tilt angle is 45 °. Next, slowly introduce ink. For 15-20 seconds, there should be about 1 ml of liquid. Watch when ink starts to appear in the fill port. Do not be alarmed if some color is gone completely, but some remains. The fact is that in a color device, paint is always consumed unevenly. If the ink is accidentally poured while refueling, then the excess can be pumped out with a syringe.
• We wipe the cartridge with a paper towel or napkin, put the sticker back in place. It is a good idea to wipe all contacts with alcohol before installing the consumable back into the printer. Remember to print a test page.

Refilling the HP 122 black cartridge

Step 1. We take out the consumable from the printer. We do this with the device turned on, and the cartridge itself is not left outside the printer for a long time. This can dry out ink, nozzles and degrade print quality.

Step 2. Remove the sticker or sticker from the device, freeing the filling hole.

Step 3. We collect about 5 ml of paint into the syringe. Then we begin to smoothly inject ink using a needle, which we immerse to a depth of 3-4 cm and at a slight angle so as not to damage the print head.

Step 4. Then we take out the needle, and wipe the excess ink with a cotton pad or napkin. We stick back the protective sticker.

Step 5. Install the device back. We recommend that you wipe the contact area first with alcohol and then with a dry cloth. We print a test page.

If there are ink streaks on the sheet of paper or the text itself is indistinct, then use the driver window to run the cleaning program. This will help pump the ink.