Turning on the tone mode of the phone is necessary to navigate through the menu system when making an outgoing call to the numbers of services and hotlines that provide services. Navigation through the menus of such systems is carried out by turning on the phone's tone mode and selecting the required item by pressing the corresponding key.
All modern smartphones support tone dialing, depending on the platform, it is turned on in one way or another.
Enable dialing
In the Android operating system, you can set the tone dialing. It is indicated in the DTMF (Dual-Tone Multi-Frequency) menu.
We go into the call settings menu and see the following:
You can read about how to turn on the phone's tone mode in the instructions for the device, in addition, depending on the phone's operating system, the tone mode is turned on by pressing one or more keys.
If your smartphone runs on the Android operating system, you must perform the following steps during an outgoing call:
- open the main menu;
- select the icon in the menu with the call of the numeric keypad;
- press the required key.
Periodically entered numbers can be deleted using the cross in the right corner. If you entered the command incorrectly, just return to the main menu of the system and select the required item again. Please note that tone mode also works in conference mode, if a call to a tone dialing system is active, all other calls do not support the tone dialing system. Tone mode, depending on the features of your device, supports entering numbers from the touch keyboard and the regular keyboard. If necessary, you can return from the tone dialing mode by opening the icon with an active call in the system menu.
Set on Windows and iOS
Users of modern smartphones on Windows and iOS often wonder how to turn on the tone mode of the phone when making a call to numbers that support tone dialing. To enable tone mode on smartphones with the specified operating system, you will need to perform several steps:
- during an outgoing active call, press the green key;
- select the required number key on the keyboard;
- if necessary, erase the entered data and hide the numeric keypad.
Navigating through the menu systems on numbers with tone dialing support is carried out using the number keys, as well as the voice input system, depending on the device of the menu system. Please note that several seconds pass from the moment you enter numbers until the system responds, most often the proximity sensor protects against accidental entry of numbers during an active call, which turns off the screen when you approach your ear. If you need to dial, you need to remove the phone from your ear, turn on tone dialing, enter the necessary command and continue working with the automated system.
You can return to the main menu of any automated system using the asterisk or pound key. If the system supports connection with the operator, it is enough to listen to all menu items or select the connection with the operator by pressing the corresponding number key.
By default, all mobile phones support tone dialing, please note that it may not work for outgoing calls to numbers that do not support menu navigation using tone dialing. As a rule, this concerns the phone numbers of hotlines for customer service. Tone dialing can be activated according to the above principle and with an incoming call, if it is active and the automated system supports the tone dialing mode.
You can find out about the availability of tone mode support when making a call by listening to the points of the automated system. If you are prompted to navigate using the phone keys, then the system supports tone dialing. If you have keypad sounds enabled on your device, when you press keys after tone dialing is enabled, you will hear keypad sounds that are created when dialing a number.
Features of tone dialing
Tone dialing on your phone works like a new call during an incoming or outgoing active call to a number that supports automated system navigation using tone dialing. Until the call key is pressed, the entered commands are transmitted to the automated system and recognized by it as commands for navigation.
Please note that touch tone for navigation only works when you make a call to a number with an automated menu navigation system. When making a regular call, tone dialing will allow you to connect a new subscriber to the conversation, send commands to connect services, and record the phone number in the phone book. The tone dialing mode allows you to independently select the necessary items in the automated system when calling a number that supports tone dialing.
on Sep 13, 2018 873 Views
Often, when contacting the support service or calling the hotline, the subscriber is urged to switch to tone dialing. Typically, this happens when you try to call a multiline number that requires you to press the numbers on the handset to confirm your selection. Understanding such nuances is not difficult even for a beginner.
Telephone communication is a complicated thing, but at the same time, it is extremely interesting. For this reason, before switching the phone to tone mode, it is worth understanding its essence and considering what other dialing options are available. Telecommunication technologies go far ahead every year, and even now modern devices support only the tone type. For devices released earlier, you still have to make the transition between two:
Related articles How to choose a portable speaker How to restore your phone battery at home Lawn grills
- pulse, which involves closing the telephone line in a special way, where each dialed digit corresponds to the number of pulses.
- tone, which uses an analog signal to dial the desired combination of numbers.
A user who is not versed in the intricacies of this topic will be able to distinguish these methods of entering numbers by ear. Remember the old rotary phones: when you scrolled the disk, you heard some clicks that differed depending on the number. Some devices, released even 10-15 years ago, still have the ability to switch to a pulsed mode. The other input method will give itself out as a difference in the height of the signal, which will depend on the key pressed. The advantage of tone digital input over pulse is primarily in the speed of dialing and connecting with the subscriber.
Tone mode on a landline phone
With the passage of time and the development of internal telephone networks, the abandonment of the outdated pulse dialing looks quite logical. Feature-rich office phones like Avaya's don't even have a mode change feature. This is understandable, since in large firms work is constantly in full swing, and the speed of dialing to a client or partner is important.
Home devices will make you wonder how to turn on tone mode on your phone. For example, the list of characteristics of the wired model of the Panasonic device says that both options are available. In some cases, pressing the buttons is not enough to navigate between them, and you should contact your telecommunications company for help. It is a mistake to assume that absolutely all radiotelephones, unlike wired ones, have only tone dialing. Voxtel Select series devices support both methods of transferring a telephone number.
Tone mode on mobile phone
Calls to long-distance hotlines, where you have to listen to an answering machine for a long time, are more profitable to make from a mobile phone. Most devices are equipped with only one input method, so the question of how to switch a cell phone to tone mode does not arise. To switch to the internal line of the desired operator, you will need to press the keys with certain numbers, which is possible only with the tone option. The person dialing the call center will hear a characteristic signal, which means that the connection has been established with the selected operator.
There has never been a pulse connection on mobile phones, since this is a feature of telephone networks for stationary devices, and the modernization of Russian automatic telephone exchanges made it possible to abandon this option forever. However, it may not be necessary to switch between input methods, but to turn on the desired type of connection, turned off for some reason. Without enabling this function, some devices will not allow you to dial a number.
How to put your mobile phone into tone mode
If you answer this question in a generalized way and in relation to each gadget, but the answer here is the same - no way! By default, all phones support and work in tone mode and there are no other options for choosing. However, there are exceptions to the rules: you cannot transfer to another set, but you can simply turn off the existing tone. This guide explains how to switch to tone mode on a touch-enabled mobile:
- Dial a phone number.
- Once the connection is established, call up the on-screen keyboard.
- Press the star or plus key. For various gadget models, you may need to hold these buttons for a while.
This algorithm will also be effective for owners of push-button phone models. Here the situation is even somewhat simpler: you do not need to open the keyboard on the screen. Having called the dialed number and having heard a request to turn on the tone input, which was probably turned off, you only need to press and hold one of the keys (usually it is an asterisk, a hash or a plus) until a characteristic signal.
Transferring a landline phone to tone mode
The internal design of home communication devices, like telephone lines, determines the choice of mode change method. In most cases, this can be done without leaving the apartment or private house. How to switch the phone to tone mode in the classic way is described in the following instructions:
- Pick up the handset of the telephone if you have a wired one, or press the call key on the radiotelephone.
- Hold down the star button for a second.
- Try pressing the number keys: if they make sounds that are different in tone, then everything is done correctly.
Another option is only suitable for some models:
- Inspect the tube from all sides for the location of additional levers on it.
- If you notice a switch with the Latin letters P and T, meaning pulse and tone dialing, then move the lever to position T.
- You can check by pressing the number buttons.
Video: tone mode
How to put the phone in tone mode - what is it. Switching to tone mode on the phone - high-tech news on the site "
Reviews and articles about new products in the categories: auto, business and analytics, video games, gadgets, hardware, energy puzzles, sound and acoustics, game consoles, internet, research, cameras, computers, space, medicine, multimedia, navigation, science, laptops , game reviews, weapons, dissenting opinions, peripherals, tablets, press releases, entertainment, advertising, robots, rumors, software, TVs, phones, technology, it's interesting.
Everything that interests people close to science and technology, as well as those who receive the fruits of the first two in the form of useful devices and gadgets, we collect here and lay out in an accessible form. If you want to know how the Universe was formed or which smartphone will satisfy all your needs - come in and stay up to date. Every day, the most interesting reading material appears on the site, news and stories from the world of the virtual network, technology, space, cars are collected and analyzed - everything that makes the planet rotate and the imagination work. It is enough to start reading any of the articles, and it is proved: you will read it!
There are only two dialing modes - pulse and tone. On all fixed phones in Russia, the pulse mode is used by default. A tone may be required if you need to select some answer option using a number, for example, when calling a call center. Then an automatic voice will ask you to put the phone into tone mode first.
You will need
- instructions for the telephone
Instruction
How to turn on the tone dialing mode?
The question of how to put the phone in tone mode often catches people by surprise when trying to contact support or when ordering various services.
The fact is that to work with new communication systems and various services, it is the tone mode that is needed. About what it is, why it is needed and how to enable it on your phone and will be discussed today.
Why do you need tone mode?
In total, there are two dialing modes on the telephone: pulse and tone. Their difference lies in the fact that pulse dialing occurs with the help of line interruption in turn, and in tone dialing - thanks to digital signals.
Pulse was invented first, and in our time it is considered old, but nevertheless it is still found in some devices. The principle of its operation was to interrupt the lines at which clicks occurred (number 1 - one click, number 2 - two clicks, and so on).
The invention of tone dialing made it possible to speed up networks and make the dialing process more convenient. Plus, this opened up many opportunities, in particular voice prompts (like telecom operators), telephone alarms and others.
In this order, each button is given a specific tone (or signal), which, when dialed, is sent to the operator and processed properly.
Despite the fact that most devices immediately work in the tone mode, and the impulse mode is already a thing of the past, it still sometimes becomes necessary to switch between them, which often raises the question of how to turn on the tone mode in the phone.
Check and switch
With a digital signal everywhere now, almost every landline phone operates on a tone schedule by default. And yet, to start work, you need to determine in what order the device is currently working and whether it needs to be changed.
This is done simply. You need to bring the handset to your ear and, by pressing any key, determine what sounds are heard when pressed.
If short beeps are heard, this means that the tone dialing mode is on and there is no need to switch it. If there are clicks, then the device operates in a pulse mode, and this mode needs to be changed.
The easiest way to switch your phone to Panasonic (the most popular) and other brands' tone mode is to hold down the "*" button for a few seconds. If that didn't work, try "#".
If the corresponding order has been activated, then the inscription ton or t should appear on the screen of the device. If nothing happens, you can test again by listening to the sounds when you press the buttons.
It must be understood that not all devices are equipped with a function of quick switching of functions. On some models, special buttons "P" and "T" are designed for this.
In some cases, you need to press the appropriate combination of "*", "#" and "-". You can learn more about this only from the instructions for the phone, or you can go to its settings (if provided), and already there look for an item that puts the phone in a different dialing order.
Converting to tonal order can also be problematic for touch models on your mobile phone. In order to configure the function you need, after connecting, you need to use a special key to access directly the keyboard itself. When it appears, press the star and plus, after which you can put the cell phone into tone mode.
During a call, press the keypad to bring up the dialing menu. Then enter an individual combination of numbers that is specific to your device. You can find this information in the review of the phone or in the instructions for using it.
Today you learned how to put your cell phone on touch tone and how you can do it with a stationary device at home.
http://lediznaet.ru
Master's response:
Any number on the phone can be dialed in one of two modes: pulse or tone. Pulse dialing is typical for stationary telephone sets with a disk dial, while tone dialing is used in modern telephone models.
Desk phone settings default to pulse mode.
How to put the phone in tone mode?
It can be identified by the characteristic crackle in the tube while typing the keys. At the same time, when dialing the number 1 in the handset, you can hear one crackle, when dialing the number 2 - two, etc. when dialing tone, a beep is heard when pressed.
When contacting a service where, during a conversation, you need to press certain keys on the telephone set to get to the corresponding menu item, a device with pulse dialing will not work. To turn on the tone mode one-time, you must press “*” and the desired key. The tone mode during the next call to the autoinformer will be in a disabled state.
Any device can be switched from pulse mode to tone mode (read the instructions for your phone model). For example, Siemens Gigaset telephones can be switched to tone mode using the following combination: press the call button, and then call the function by dialing "10". In the menu that appears, press the "1" button.
If you have, for example, a Voxtel landline phone, you can switch it to tone mode in the following way: by selecting the “programming” button, press the combination “*-2-2”. When the signal sounds, you should press "*", after - the "programming" button. In DEXT devices on the base there is a key for switching dialing modes.
In modern models of Panasonic telephones, a switch is provided on the base (it is located on the side). To switch the device to tone dialing mode, you must move the switch to the “tone” position. If the model is outdated, you need to go to the menu of the telephone set, select the "call programming" item and select "Tone key dialing mode" from the list. However, it should be noted that there may not be such an item in the menu. In this case, you should refer to the instructions for this telephone set for clarification.
In ordinary city phones, there are two types of dialing: the so-called pulse, known since the days of rotary telephones, and tone.
Currently, it is generally accepted that pulse dialing (when the number of pulses, interruptions corresponds to one or another dialed digit) is a relic of the past. Today, tone dialing (in which the number is dialed using special tone bursts) is increasingly used.
We put the phone in tone dialing mode - definition and two simple ways
However, quite often telephone exchanges do not support tone dialing.
Instructions for switching the phone from tone to pulse mode
Some phone models do not natively support tone dialing. For example, rotary telephones are designed for pulse dialing only. If you have a similar device, you can safely use its functions.
Almost all modern telephones have a dialing mode switch. It usually represents a moving slider switch. It also always has a “Pulse / Tone” switch, which corresponds to pulse and tone modes. Move the switch to the “Pulse” position. So, your phone has changed the dialing mode.
If your phone model does not have this switch, then the “*” (“asterisk”) key, present on the numeric keypad of your telephone, will perform a similar function of switching modes. Pressing again will return the phone to the previous dialing mode.
Sometimes after changing the mode, you need to lower the handset onto the lever and raise it again. That is, during a conversation, it is almost impossible to transfer the device from one mode to another on some phone models.
If you have a DECT phone (that is, a phone with a wireless radio handset), then the dialing mode settings are contained in the settings of the “base” to which the handset is “linked”. Access to the settings is possible directly from the handset of the telephone set, or from the control buttons on the "base".
Read the instructions for your telephone. It will necessarily contain information about setting up the device, including switching to tone or pulse dialing mode. You can also find instructions on the manufacturer's website or sites created to help users.
How to put the phone in tone mode, what is it. Switching to tone mode on the phone
Often, when contacting the support service or calling the hotline, the subscriber is urged to switch to tone dialing. Typically, this happens when you try to call a multiline number that requires you to press the numbers on the handset to confirm your selection. Understanding such nuances is not difficult even for a beginner.
What is phone tone mode
Telephone communication is a complicated thing, but at the same time, it is extremely interesting. For this reason, before switching the phone to tone mode, it is worth understanding its essence and considering what other dialing options are available. Telecommunication technologies go far ahead every year, and even now modern devices support only the tone type. For devices released earlier, you still have to make the transition between two:
- pulse, which involves closing the telephone line in a special way, where each dialed digit corresponds to the number of pulses.
- tone, which uses an analog signal to dial the desired combination of numbers.
A user who is not versed in the intricacies of this topic will be able to distinguish these methods of entering numbers by ear. Remember the old rotary phones: when you scrolled the disk, you heard some clicks that differed depending on the number. Some devices, released even 10-15 years ago, still have the ability to switch to a pulsed mode. The other input method will give itself out as a difference in the height of the signal, which will depend on the key pressed. The advantage of tone digital input over pulse is primarily in the speed of dialing and connecting with the subscriber.
Tone mode on a landline phone
With the passage of time and the development of internal telephone networks, the abandonment of the outdated pulse dialing looks quite logical. Feature-rich office phones like Avaya's don't even have a mode change feature. This is understandable, since in large firms work is constantly in full swing, and the speed of dialing to a client or partner is important.
Home devices will make you wonder how to turn on tone mode on your phone. For example, the list of characteristics of the wired model of the Panasonic device says that both options are available. In some cases, pressing the buttons is not enough to navigate between them, and you should contact your telecommunications company for help. It is a mistake to assume that absolutely all radiotelephones, unlike wired ones, have only tone dialing. Voxtel Select series devices support both methods of transferring a telephone number.
Tone mode on mobile phone
Calls to long-distance hotlines, where you have to listen to an answering machine for a long time, are more profitable to make from a mobile phone. Most devices are equipped with only one input method, so the question of how to switch a cell phone to tone mode does not arise. To switch to the internal line of the desired operator, you will need to press the keys with certain numbers, which is possible only with the tone option.
The person dialing the call center will hear a characteristic signal, which means that the connection has been established with the selected operator.
There has never been a pulse connection on mobile phones, since this is a feature of telephone networks for stationary devices, and the modernization of Russian automatic telephone exchanges made it possible to abandon this option forever. However, it may not be necessary to switch between input methods, but to turn on the desired type of connection, turned off for some reason. Without enabling this function, some devices will not allow you to dial a number.
How to put your mobile phone into tone mode
If you answer this question in a generalized way and in relation to each gadget, but the answer here is the same - no way! By default, all phones support and work in tone mode and there are no other options for choosing. However, there are exceptions to the rules: you cannot transfer to another set, but you can simply turn off the existing tone.
This guide explains how to switch to tone mode on a touch-enabled mobile:
This algorithm will also be effective for owners of push-button phone models. Here the situation is even somewhat simpler: you do not need to open the keyboard on the screen.
How to enable tone dialing on the phone?
Having called the dialed number and having heard a request to turn on the tone input, which was probably turned off, you only need to press and hold one of the keys (usually it is an asterisk, a hash or a plus) until a characteristic signal.
Transferring a landline phone to tone mode
The internal design of home communication devices, like telephone lines, determines the choice of mode change method. In most cases, this can be done without leaving the apartment or private house. How to switch the phone to tone mode in the classic way is described in the following instructions:
Another option is only suitable for some models:
Video: tone mode
Technology
What is the tone mode of a landline phone?
Fixed (wired, home) telephones for their intended purpose are now used less and less, giving way to mobile devices based on radio communication. Since the latter in most tariffs do not require a monthly subscription fee, the cost of their use is even lower than that of stationary counterparts. At first glance, it may seem that when using wired telephones, no questions can arise, since the technology is old and well-studied. But this is true for the developer, and not for a simple user of such a phone.
For example, sometimes companies and banking institutions in their contact details indicate a free phone number, by calling which you can resolve many issues. Usually, on the other side of the wire, the answering machine picks up the phone, during the conversation asking the subscriber to press certain numbers (turn the dial). Alas, for many, this is where the call ends, since the answering machine does not react in any way to actions with the phone, ignoring button presses. Why?
The reason is simple - there is a pulse and tone mode of the phone. Surely, everyone has heard strange clicks or beeps that accompany pressing numbers or dialing a number using a dial. Beeps are tone mode, and clicks are pulse mode. Consider how dialing occurs in old rotary telephones.
When the disk is rotated to the desired distance and automatically returned to its original position, special electrical contacts are closed: each closure generates a click-impulse, counting their number, you can determine the dialed digit and, accordingly, the number. This "counting" is carried out by the equipment at the station (ATS). Simple and effective. In newer phone models, the contacts are replaced by a special pulse generator, which, by the way, can also be switched to tone mode.
Subsequently, the pulse dialing was replaced by a more technological tone (tone). In it, dialing is carried out not by digits, but by modulating alternating current with the desired frequency. Each digit (button) has its own signal tone. Further, everything is similar: the PBX perceives a combination of tones and converts them into a dialed telephone number. The tone mode is more noise-resistant (errors in dialing now completely depend on the owner's attentiveness, and not on the state of the network), and also allows you to connect to the subscriber more quickly. All modern telephones are tone-tone, pulse mode may be completely absent in them.
By the way, it is believed that the tone mode provides a higher sound quality.
How to put your phone in tone mode
This is only half true. To work in tone mode, it must be supported by both the phone and the PBX. Trying to use the new phone on a pulse PBX will not provide any benefit (if it works at all). Stations rated for tone mode are digital (or mixed) as opposed to analog pulse. Hence the improvement in sound.
A programmable pulse generator allows you to switch the phone to tone mode and work with both pulse and tone communication networks. Let's assume that the subscriber is served by analog automatic telephone exchange. To put the phone into pulse dialing mode, it is usually necessary to press and hold the "*" (asterisk) button for a few seconds. If this does not help, then we turn the device over and study the bottom cover - often there is a small toggle switch for selecting the mode. Switching to tone dialing is performed in the same way.
Now back to the example given at the beginning of the article. Owners of rotary telephones connected to analog stations can forget about communicating with an answering machine that requires pressing any buttons, since this is impossible without additional equipment. Of course, there is a way out - this is a special prefix that generates tones in the network, but you will have to forget about convenience.
Technology
CDMA phones - what is it? Mobile and landline CDMA phones
If we decipher in detail the full abbreviation of these four letters (CDMA), then we get the following words - Code Division Multiple Access. And even when we decipher this meaning, translating it into a language we understand, m ...
Law
What is a visa regime? Ukraine, Russia - visa regime 2014
Today, there are quite a few people who one way or another need to face crossing the border, so you have to apply for a visa. It should be noted that some do not even know about such a thing as a "visa" ...
Arts and Entertainment
What is tonality in music. The tone of the song. Major, minor
Before analyzing a particular musical composition, the performer first of all pays attention to the tonality and key signs. After all, not only the correct reading of notes depends on this, but also the holistic character of the production ...
Computers
What is a teletype on a mobile phone?
Some phone users, delving into the settings, come across an incomprehensible abbreviation TTY or the phrase “TTY mode”. Also, a characteristic sign may be present in the status bar of the smartphone ...
Computers
What is Windows 7 Safe Mode?
The user of the operating system from Microsoft, who does not know what the safe mode of Windows 7 is, can be called lucky. This software solution turned out to be so effective that it existed ...
Computers
What is "sleep mode", what is the difference?
Modern computers are equipped with a huge number of functions that are not always fully understood by a typical Windows user. One of these options, which at first glance does not raise any special questions ...
the beauty
What is foundation for dry skin?
Foundation is an indispensable part of any woman's cosmetic arsenal, who is trying to choose the best cream to look flawless. But when buying the most expensive funds, we do not always pay attention to ...
Technology
What is HDR in a phone camera? High Dynamic Range - expanding the dynamic range of a digital image
The desire of smartphone manufacturers to make their products more attractive to buyers has led to the fact that it is now quite difficult to find a device that would not have a built-in digital camera. Des…
Technology
What is DFU mode? iPad: How to activate DFU mode?
If you have had any problems with the software on your iPad, or have had the need to erase all information from the device, you know what updating and restoring is. In the same case…
Technology
What is a flexible screen? Benefits of a flexible screen phone
The appearance of a modern mobile phone is firmly "settled" in the minds of most people. If we are asked to imagine a modern device, something like the latest models will surely appear before us ...
If you have landed on this page, then surely you need to get an answer to the question, how to install tone dialing on a mobile phone?
How to turn your phone into tone mode
First, let's understand what the function is "dialing in tone mode" and what it is for. Any cellular user sooner or later has a situation where you need to:
obtain information on a specific operation from the service provider (operator);
call the bank hotline;
order ringtone.
In these and many other cases, tone dialing is required. Mobile devices for cellular communication are equipped with two modes - tone and impulse. Pulse dialing is already obsolete and almost never used. Its essence lies in the number of clicks on the button: one click - the number 1, two clicks - the number 2, and so on.
On modern mobile phones, the tone mode is set by default, and the pulse mode is not available at all, since it is slower and more inconvenient than the tone mode.
How to turn on tone dialing on your phone
It has already been said above that on modern devices the tone mode is set by default, but in phones with a touch screen, the keyboard does not always light up. In addition, the operator may ask the interlocutor to switch the phone to the desired mode, which means that the setting has not been saved in the phone.
Therefore, the user needs to know how to display the keyboard on the mobile phone screen. When you press the call button and hear a beep on the handset, press the soft key, which will turn on the on-screen keyboard. After that, press * or +, that's it - DTMF mode is active.
The owner of a touch phone should pay attention to the options available during the call. Sometimes the transition to the tone mode is carried out through them. During a conversation or listening to information, press the number entry item and enter the desired combination of buttons.
This combination must be indicated in the instructions for the device. If these recommendations do not help to put the device into tone mode, then it is infected with a virus or there are problems with the firmware. In this case, the owner needs to contact the service center.
