There are several ways to get rid of advertisements on the Tricolor information channel and turn on your favorite channel when the equipment starts up. One has only to spend simple manipulations with a remote control.

Users often face the problem of unnecessary TV channels appearing. These channels can be:

• Duplicated as a result of software updates;
• Changing the broadcasting frequency of the channel, which led to the lack of broadcasting;
• Family members are not interested in watching programs;
• Playable in poor quality channels due to equipment change.

To enjoy watching your favorite channels and not encounter an advertising information channel, you need to delete or encrypt.

How to delete channels - instructions

When the option to create favorite lists appeared, the ability to change classic lists disappeared. But there is a possibility of uninstallation if the Stingray software is installed on the equipment. It is characterized by the presence of a manual search.

The procedure for removing channels consists of the following stages:

The editing operation takes into account the fact that deleting the list " Manual search»Will cause all channels to disappear. Therefore, with the appearance of new lists, it is necessary to move this list down.

After completing these steps, when you turn on the receiver and TV, the first channel from your list will be displayed. But all preset lists will disappear from the menu. And also in front of the TV channels in your list there will be question marks (do not pay attention). The procedure is suitable for receivers of the GS 8306, B210, B531 series and other modern models.

How to remove duplicate channels

You can remove duplicates by organizing the channels:

Some receiver models (GS 8300, 8302, 8304) require confirmation of the delete operation by entering the code "0000".

New clients who have connected to the Tricolor broadcast can get rid of unnecessary channels by blocking. Execution scheme:

• Go in the main Menu to the "Channels" item;
• Open the section "Channel organization" (if required to gain access, enter the code "0000");
• Moving through the list of channels, press the yellow button on the unnecessary position;
• To exit, click "Exit" and save the changes.

By placing a blocked TV channel at the bottom of the entire list, the user will not notice its presence when switching.

How to recover a deleted channel by mistake

A full return to previously broadcast channels is possible when resetting the settings and then standard search... The blocked channel can be returned to the display by removing the block and confirming the operation by entering the code "0000" (while moving through the list, press the yellow button on the blocked channel).

The largest Russian operator satellite TV Tricolor TV won big market viewers' initial affordability. And now, when the number of subscribers has exceeded 10 million, the Tricolor TV company decided to break away from viewers on full program... In addition to advertising on channels created by Tricolor TV, on which it was not previously, now advertising splash appears for a few seconds between switching tricolor TV channels. In the near future, we may expect an increase in the monthly fee or a cutoff of another basic free package.

Advertising insert during tricolor tv channel switching appeared in new firmware software, which, as it turned out, was released not only to improve the very "raw" receivers, but also to optimize the parameters of advertising inserts.

Fighting advertising on Tricolor TV

To disable advertising, make changes in the receiver settings: Menu - Settings - System settings- Others - Display time and set the parameter "0" - Save changes - Exit - Turn off the receiver from the network for a few seconds.!

If you can't remove ads with some model, write to the tricolor tv support service or contact the online consultant in your Personal account on the Tricolor TV website and demand to remove ads! There are already such applicants, the ads are being removed. It is easier for them to sort it out with you, because they have 10 million more unsuspecting subscribers left.

Scammers have already responded on the Internet, who, under the guise of a tricolor TV support, offer to remove the advertising splash if you enter your number cell phone, here is this scam site "application-to-disable-advertising.rf" don't be fooled!

The "Basic" package becomes paid

Tricolor TV company promised that the main all-Russian TV channels will always remain FREE OF CHARGE.

From February 5, for Tricolor TV subscribers with MPEG2 equipment without subscription fee about 10 basic federal channels... From the above date, "Channel 5 Petersburg" of the free package has been transferred to the frequency 12111 L (DVB-S2), where SD-channels are broadcast in improved quality (DV-multiplex). A copy of "Channel 5 Petersburg", which is broadcast on 12226 L in MPEG2, is available for viewing only after paying for the "Single" tariff, which is 1200 rubles per year.

They also ceased to be available (in free package) TV channels: "TV Center", "Russia 24", "Carousel"

Detailed video instruction "How to remove advertising Tricolor"

Both old and new clients periodically face the fact that there are too many TV channels on the menu. Some may be duplicated after a software update, others are already outdated and do not work, and some simply may not be needed and not interesting to households. And then customers have a question, how can you delete or change channels on Tricolor TV equipment? After all, it is much more convenient to remove completely empty programs, and rearrange the list so that your favorite TV channels are always in sight.

What to do for existing clients

Satellite broadcast packages include many of the most different channels but not all of them are needed by users. This is especially true of outdated and poorly transmitted on modern equipment, as well as commercial programs... Users who have not yet had time to replace the receiver with a new one can delete without special problems... You just need to use the remote control from the transmitter.

1. Go to "Menu", "Settings" and click on the item "Organize favorites" or "Organize channels".
2. Delete the entire favorite list containing unnecessary TV channels by pressing the red button on the remote control.
3. If you use yellow, the list items will be arranged alphabetically. Select an extra channel from the list and press "OK" to delete it.
4. Remember to save your changes before exiting.

For some receivers code required to remove or sort the gears, it is simple - 0000. This method is not suitable for all types of equipment, mainly only for DRE 5000-7000, GS 8300 (M, N) and GS 8302, 8304. If your receiver belongs to one of these four models, then the problem is how to remove unnecessary channels you won't. As for everyone else, it is possible with them lock only.

Solving the problem for new customers

On the modern devices everything is a little more complicated, you won't be able to delete channels on them. New users also often ask the question "How to remove unnecessary programs?", However, on new receivers, they can only be blocked. And for this you will also need code 0000... The blocked TV channel will remain on the general list as extra ballast, but it will not interfere with the main broadcasting. If you put it at the end of the menu, you can even forget that you have unnecessary TV channels.

To understand how to block unnecessary broadcasting, you need to take the remote control from the receiver and perform several actions:

Also, with new and old equipment, you can swap items, rename TV channels and create lists by genre in order to immediately find the desired program. Now the satellite TV company is actively updating the software, so soon, no matter how much you want to remove extra channels on Tricolor, this opportunity will no longer be.

Creating a favorite list on receivers
brands: GS E501 / GS C591; GS U510; GS U210

The new receivers of the Tricolor TV company have created standard lists TV channels. They cannot be edited or deleted, however, to configure own list, you can create a separate favorites list with a list of the channels you are using.

Creation of a favorite list of TV programs on receivers PGS E501 / GS C591; GS U510; GS U210 is carried out using the menu - "Channel editor", where you can arrange the list of channels at your discretion.

And so we proceed to create a favorite list.
1. On the control panel (PU), press the "MENU" button and in the pop-up window, at the bottom of the TV screen, using the "RIGHT" - "LEFT" buttons, select the "APPLICATIONS" menu item and confirm the selection with the "OK" button.

2. In the new menu window that opens, using the arrows "RIGHT" - "LEFT", "UP" - "DOWN" of the control panel, we find the submenu "CHANNEL EDITOR" and press the button "OK", after which a window will open in which we will directly create the favorite list ...

3. In the left part of the window, create our channel list. To create a new list, press the green button F2 PU, after which the on-screen keyboard will open, where we enter the name of the new list, for example "MY CHANNELS". Save the name of the favorite list with the blue button F4 PU.

4. Move the cursor to the list we created and press the F2 button, a list of all TV programs available on your receiver will appear on the right side of the window. Select from the list the TV channel that you want to save in your favorite list and press the "OK" button on the PU. Press the green F2 button again and select the next channel. We repeat this operation the required number of times.

5. Move the channels up and down using the red F1 button. Hover the cursor over the channel that needs to be moved and press the F1 button (the selected channel will be marked with a special symbol), use the UP - DOWN PU arrows to move the channel to desired position and click "OK".
You can delete an unnecessary channel with the yellow F3 button.
6. After we have created the favorite list, exit the "CHANNEL EDITOR" application by pressing the "EXIT" button of the PU several times.
7. Press the blue button F4 and in the pop-up window (on the left side of the screen) we find the list we have created, in our case "MY CHANNELS", confirm the selection with the button "OK" PU.

This completes the creation of the favorite list. On receivers of brands GS E501 / GS C591; GS U510; GS U210 you can create up to fifteen favorite lists with different names and arrange the channels as you like.

Read also:
How to create a favorite list on brand receivers -

It is very convenient to use satellite TV, but from time to time, both old and new clients have a problem. A large number of channels appear on the screen to be deleted. But few people know how to delete unnecessary channels.

Why unnecessary channels appear:

There can be many reasons. But when they appear, it becomes very difficult and inconvenient to use such television.

• one of the reasons for the appearance of unnecessary TV channels is the reinstallation software;
• There is also such a situation that the channel worked earlier, and then it was transferred to a new broadcasting range and therefore it does not work now. Then its removal is required so that it simply does not bother you;
• channels are installed that are not interesting to anyone, so why would they interfere if it is easier to put them on blocking.

So it is much easier to install the programs in such a way as to immediately get to the channel that is needed. And then just enjoy watching. Most often, customers refuse unnecessary ranges, for the reason that they are outdated or poorly reproduced on new equipment. If you are a satellite TV user with old equipment, then it is much easier to refuse unnecessary channels.

So, we are learning how to delete unnecessary channels on satellite Tricolor TV. Let's look at the step-by-step instructions. How to remove? You only need your TV remote control, so:

• select "Menu" on the remote control, then go to the settings. Then you need to select "Arrange favorites";
• using the red button on the remote control, you can delete the entire list of channels that you no longer need;
• no code is required when uninstalling. All channels can be ordered using the yellow button;
• the final stage is preservation. If this is not done, then all efforts are in vain.

New users

How to solve the issue of deleting channels for new users on Tricolor? On devices that are considered new generation equipment, everything is much more complicated. Here you can use only blocking. The block is also set when you use 0000. In this case, the program will remain, but it will not interfere with the viewing of programs. As an option for solving the issue, you can move it to the end of the list and then it will not catch your eye at all. For refusal, you also need only a remote control, you do not need to do anything on the receiver.

Phased shutdown:

• select the item "Menu" on the control panel;
• go to the "Installation" program;
• then enter 0000;
• the next stage is “channel organization”;
• use the arrows to select unnecessary information on the screen and after selection, press EXIT, and then save.

The same actions can be done if you decide to change the name of the broadcast.

At the moment, the company is replacing all software. Therefore, in the near future, the opportunity to change something will generally remain in the past. So try it now while you can.

If it becomes necessary to unlock or return the channel, then do the same using 0000 to unlock the receiver. Read also.

GS B211 TV channel editor, watching TV.

Many people ask us - how to change the list of TV channels on the GS B211 receiver? And today we have prepared material on this topic. Everything is very simple here, but you need to understand that you need to spend a little of your time on this. Anyone who is not satisfied with the order of the list of TV channels that the Tricolor TV operator offers from the stream may come in handy.

G S B211 TV channel editor, go to the receiver menu.

In order to do everything, we need to go to the receiver menu and find the appropriate function, for this we press a few buttons and enter. For convenience, the arrow shows where you need to go.

GS B211 TV channel editor app

G S B211 TV channel editor, list of folders in the receiver's memory.

As you can see, there are folder names on the left side of the screen, in each of them, when you hover over them, there are TV channels and these TV channels show themselves with right side... These lists are sent and formed by the Tricolor TV operator in his control room and the receiver is already receiving them in finished form... Therefore, it is possible that many do not like it.

G S B211 TV channel editor lock mode.

Of course, you can try to go to this list and try to change something, but nothing will work out for you, because the developers have blocked all the possibilities, leaving only the possibility of blocking the TV channel, this is a function in order to watch this TV channel you will need to enter the code. It can be clearly seen on the screen that there seems to be a list, but it is not active.

G S B211 TV channel editor, create a new folder.

In this case, you need to do a little differently, create your own folder and name it something that would be clear to you. To do this, using the on-screen keyboard, enter the name by selecting characters in the Latin or Cyrillic alphabet, or using numbers.

GS B211 TV channel editor, selection of TV channels for your list.

The name was entered, you have new folder, now you need to add TV channels to this folder, for this, leafing through the list of the proposed ones, mark all the TV channels that you are interested in, do not look at their order at the moment, you do not need to pay attention to this fact at this stage.

GS B211 TV channel editor, editing your list.

After the TV channels have been selected, they appear in your folder and now you can move everything, for this there are two ways - either select a function using the additional colored buttons on the remote control, a hint on the TV screen, or using the on-screen menu.

G S B211 TV channel editor, functions that are available in the editor.

Here, as well as in the lists offered by the operator, only all actions are operable and not blocked, for example, select the delete function and delete all TV channels that you are not interested in, you want to swap places, select edit and drag the TV channels from one place to another.

It is worth noting that the larger the list, the more the receiver “thinks” or “dulls” or “there is a delay”, here you will not do anything, this is a problem for the receiver and you just have to wait until it is possible that this processing speed will be corrected.

And in conclusion, you can look at the video in which everything will be shown. Experiment with lists, now we hope you succeed.

The "main menu" of the satellite receiver is called by pressing the "MENU" key. To select an item of the main menu, use the up / down and left / right keys, to confirm the selection - the "OK" button, to exit the "Main menu" - the "EXIT" key or the second key "MENU". The "Main Menu" and all of its internal items are full-screen. Internal menu items include:

Menu title.
- Panel function keys receiver Tricolor, including 4 colored keys displayed on the TV screen in the same order as on the remote control of the GS HD 9305 receiver. If the key is active, it has an inscription. The inscription under the key informs about the action performed when this key is pressed. If the key is inactive, then it has no signature.
- Sections of the menu. To select a menu section, use the up / down buttons, to confirm the selection - the "OK" button, to cancel or move to a higher level - the "EXIT" button.

HD 9305 menu items may look like this:
1. Keys for moving to the next menu level satellite receiver.
2. Input fields. Use the "NUMERIC buttons 0-9" to enter.
3. Drop-down lists. To open the list press the "OK" key, to move through the list use the up / down buttons, confirm the selection - the "OK" key, cancel - the "EXIT" key, in addition, you can select an item in the list with the left / right keys.
The drop-down list can also be an input field. To access the individual functionality of the Tricolor TV HD receiver, you may need a PIN code (a requirement to enter the code will appear on the TV screen). For more details, see the "Blocking" section.

To be able to add to the memory of the HD receiver or update the list of found Tricolor TV channels and radio stations, use the specialized function “Search for Tricolor TV channels”. The main advantage of such channel scanning is that there is no need to know the frequencies, polarization, and other technical characteristics of broadcasting TV and radio channels. To search for television channels and radio stations of the Tricolor operator, in the "Main Menu" select the item "Search for Tricolor TV channels" and press the "OK" button. When prompted to confirm the scanning of channels and radio stations, select "Yes" and press the "OK" button. On the screen television receiver the "Region selection" menu will appear (see "Installation Wizard", step 5 "), Specify the region using the left / right keys or the drop-down list, after that, to save the specified region, move the cursor to the" OK "button and press the" OK "key on the remote control of the receiver. After that, scanning of TV and radio channels will start.

If the data about the region was specified in the "Setup Wizard", in this case, after confirming the request to scan the tricolor TV TV and radio channels, the choice of your region is not required.

After scanning, you will be prompted to save the found TV and radio channels. Select “Yes” using the left / right keys to save the scan results. TV and radio channels scanned up to that time will be displayed in the list of TV and radio channels in white, and new channels found during of this search- in blue.

The highlighting of new TV and radio channels in color disappears when you switch to these channels for the first time, also after the absence of power supply and further connection of the receiver to the electrical network.

Search, organization and editing of Tricolor channels.

V this paragraph menu, the subscriber will be able to search for TV and radio channels, in automatic or manual modes, the menu items "Organize channels" and "Organize favorites" are also available.

Automatic search.

In the GS 9305 HD menu section "Automatic search", you can search for TV and radio channels in automatic mode... This requires:
1. Specify the number of the satellite dish or set the parameters for a new one: press the key of blue color, the "Antenna settings" window will open, in this window you need to enter the settings for a new satellite dish(see the section "Antenna tuning")
2. Indicate the name of the satellite from which the channels are broadcast
3. Specify encoding

Encoding type
Specify "Any" - leave unchanged.
Indicate "FTA" - leave unchanged.
Select "DRE + FTA" if you want to add TV and radio channels to the receiver's memory open access and body or closed with "DRE" encoding

Specify in the menu "Quick search" or "Full search".
Quick search - the satellite receiver searches for channels by the list of transponders in the permanent memory of the satellite receiver. Full search- the search is performed according to the list of transponders stored in the hd memory of the tricolor TV receiver, and the frequencies of the transponders that are broadcast in the stream.

Manual channel search mode.

In the "Manual search" section of the menu it is possible to set detailed settings(transponder frequency and polarization) to scan tricolor TV channels with arbitrary values. For this case it is necessary:
1. Specify the number of the satellite dish or set the parameters for the additional one by pressing the blue button, after that the "Antenna settings" window will open, in this window you need to specify the settings for the new satellite dish
2. Specify the name of the satellite
3. Specify from the drop-down list, or set manually using buttons 0-9 the transponder frequency in the xxxxx format. To confirm specified parameters you must press the "OK" button
4. Specify from the drop-down list or enter manually using the numeric keys the flow rate in the xxxxx format. To save the manually entered data, be sure to click the "OK" button
5. Specify the polarization of the transponder (vertical, horizontal, left, right, auto)
6. Specify the type of encoding. If the transponder exists and the information is correct, the scales for the strength and quality of the signal at the bottom of the screen will turn green
7. Specify in the menu "Search" or "Network search"
Search- the receiver scans by parameters, by the specified user.
.
Network search - this possibility is performed if the original transponder in the digital stream contains information about the frequency of another transponder. Scanning will continue on another transponder. During scanning, a progress bar and 2 lists of detected TV and radio channels are displayed on the TV receiver screen. If found TV channel is already present in the general list, it will not be added again. After that, a request will appear on the TV screen to save the found TV and radio channels, with a confirmation of their number.
.
When you press the "EXIT" button during the scanning of television channels, the search will end, in the meantime it is possible to memorize those tricolor TV TV and radio channels that the receiver has already been able to find.

Channel organization

The Channel Organization menu includes TV program categories by specific properties:
TV / Radio - includes two lists of TV and radio channels: TV and Radio;
Operator - includes a list of operators of scanned TV and radio channels;
Satellite - includes a list of satellites from which TV and radio channels of tricolor TV and radio stations were detected;
Transponder - includes a list of transponders from which channels were found.
To select a group, move the cursor to the name of the group using the keys to go to the list of group elements, press the "OK" key. Use the keys to select required element list and press the "OK" button, after that a window will appear on the TV screen with a list of the TV channels of the original group. On the right side of the channel list, there is a field with the parameters of the selected television channel: satellite, operator, frequency, polarization, stream rate (SR), error correction (FEC), encoding.

On the right side of the name of the radio channel is special badge... Scrambled, that is, pay-per-view channels, are marked with a "$" symbol. After the Tricolor TV channels are decoded, this icon will not disappear. There is also a way to edit TV and radio channels.

EDIT TV and radio channels - in order to select a TV channel or radio station, press the "OK" key. The highlighted channel or radio station is highlighted with a tick. To cancel the selection, press the "OK" key a second time. In order to mark a group of TV and radio channels, use the "OK" button. To invert the selection for batch operations, press the green key. Use the up / down keys to move through the list.

DELETE Channels - select a channel or several channels that you intend to delete. Press the RED key. A message will appear on the TV screen. To confirm the operation of deleting channels, move the cursor to "Yes" and press the "OK" key. If you want to cancel the deletion, move the cursor to "No" and press the "OK" key or press the "EXIT" key.

LOCK - Select the channel or group of channels you want to lock. This feature will be useful if you are watching the Tricolor TV "Night" package and want to block these channels from children. Press the "YELLOW button". Next to the channel number appears special character blocking - lock. To unblock a channel, you need to enter your PIN. If you want to remove the blocked channels, you must select the blocked channel by pressing the "YELLOW key". After that, the next to the channel number will disappear. special sign blocking.

Sort favorites

The "Arrange favorites" menu item makes it possible to form favorite lists, add channels to the lists by specific characteristics (filter), select, delete, rename, swap and sort in alphabetical order. By default, the favorite lists are "Music", "News", "Sports", "Movies", "New 1", ..., "New 26". The largest number of favorite lists is thirty. To rename the list, press the blue key.

In order to remove all TV and radio channels from the favorite list, specify desired list, press the red key and confirm the deletion. To add channels to the list, select the desired list and press the "OK" key. The window that opens on the left side of the screen displays the content of the favorite list, and the right side of the screen displays the channels from which you can create a favorite list. Use the left / right keys to move the pointer to the list of all TV and / or radio channels. Use the up / down keys to select the desired TV channel or radio station and press the "OK" key, after that the selected TV channel or radio station will move to the favorite list in the left part of the window.

To move all TV and / or radio channels to the favorite list, press the blue key. To simplify the selection of programs, you can use program sorting by alphabet ("YELLOW key") or filter ("RED key").

Using the filter, you can mark programs by specific characteristics: satellite, transponder, operator, type (TV, Radio), type of encoding (FTA, Coded, DRE, etc.). To filter channels by any property, press the red key; to reset the filtering parameters, press the green key. Press the key to exit the filter. yellow color or the EXIT key. To move the specified channel in the favorite list, select with the arrow keys required channel and press the green key. An arrow symbol appears instead of the channel number.

Move the channel to a new position. Press the green key a second time to store the channel in the new position, to return the channel to its original position, press the EXIT button,. To remove a channel from the favorite list, select the channel you want to remove and press the "OK" key. To remove all channels from the list press the blue key.

To access most of the receiver's functions, you need to know the PIN code (the screen will ask you to enter the code). The default PIN is 0000 (four zeros). Settings (language settings, A / V output settings, antenna, satellite, screen, time, lock, factory settings)

Satellite dish settings

The Antenna Setup menu screen is available in the Settings section by pressing the OK button, or in the Auto and Manual Search menus by pressing the BLUE button on the selected antenna. On this screen, you can map the antenna number to specific settings for switches, LO frequencies, etc.

At the starting point, the user needs to select the number of an existing satellite dish or specify the settings for a new one.
Any connected to the receiver (via the disc switch) parabolic antenna must have own number in this menu item. Using the "RED key" of the receiver's remote control, you can completely delete the parameters of the satellite dish, together with the channels belonging to it. To add a new antenna in the "Antenna" item, press the "YELLOW button", then set the settings for the new satellite dish. SETTING UP SATELLITE CONVERTER (LNB)
To configure the satellite converter set its type: "Universal 1", "Universal 2", "9750", "10600", "10750", "Custom". If your antenna is tuned to Tricolor TV or Ntv-plus, in this case it is necessary to indicate the converter type "10750". If the antenna is tuned to one of the European satellites such as Sirius, Hotbird, Astra, etc. - it is necessary to indicate "Universal 1".

If you have specified the LNB type “Univers. 1 ", then switching between the local oscillator frequencies 9750 and 10600 MHz is carried out in automatic mode, when you specify the value of the transponder frequency in the search menu for tricolor TV channels and radio stations. Setting the 22 kHz tone is optional (disabled). In case you have installed the LNB type “Univers. 2 ", then switching between the local oscillator frequencies 9750 and 10750 MHz also occurs in automatic mode. Setting the 22 kHz tone is optional (deactivated). In the case of LNB "9750", "10600" or "10750", the corresponding value of the lower operating frequency heterodyne. If the required frequency is not in the list, press the "BLUE key" and add the frequency manually using the "Numeric buttons". If you have selected the "Custom" LNB type, you can set the values ​​of the lower and upper operating frequencies of the local oscillator yourself. For this purpose, press the "BLUE key" and specify the frequencies manually using the "NUMERIC buttons 0-9".

SATELLITE CONVERTER POWER SUPPLY (LNB)

Possible values ​​for this section: "Disabled", "Enabled", "Increased". When Disabled is selected, no power is supplied to the LNB IN jack. When you select the "Enabled" option, the standard value of the supply voltage of the satellite converter is supplied to the LNB IN connector. When you select the "Increased" option, a 1V higher value of the converter supply voltage is fed to the LNB IN connector. Increased tension power supply LNB used in rare cases of non-standard installations, mainly when the cable is too long.

TONE
The value in this field is set to 22 kHz and is used for switching the converter local oscillators. DISEQC 1.0

DISEQC 1.1 INPUT
If you have installed several satellite converters or antennas connected to the receiver using a DiSEqC switch, then you need to select the appropriate Switch A-D or ToneBurst А / В or C + ToneBurst А / В parameters.
DiSEqC 2.0 switches support DiSEqC 1.0 protocol control. When using DiSEqC 1.1 and DiSEqC 2.0 switches, you can connect up to 1 satellite antennas to the GS HD 9305 satellite receiver. MOTORIZED SYSTEM

To work with a motorized antenna system, at this point it is necessary to indicate its type of control. If you are using a motorized system with a stationary type of control, in this section of the menu set the value "Stationary", and in the next menu item specify "Name of the satellite". If you are using a motorized system with support for DiSEqC1.3 control software, in this section of the menu specify the value USALS input. If you use a motorized system to control the antenna drive with the DiSEqC ™ 1.2 protocol, then in this menu item set the DiSEqC 1.2 input value. At set value USALS input or DiSEqC 1.2 input, you need to configure USALS or DiSEqC 1.2 in the appropriate section. Pressing the "OK" button with the cursor positioned on this section, will open a window in which USALS or DiSEqC 1.2 is configured.

DISEQC 1.2 SETTING

On the menu DiSEqC settings 1.2 the "Position" field is available. The field for selecting one of the existing positions or creating a new one by pressing the "YELLOW key" on the receiver's remote control. You can delete a position using the "RED button". To change the position number use " BLUE button": A window will appear on the TV screen for entering the number from the remote control of the satellite receiver using the" NUMERIC buttons 0-9 ". Press “OK” to confirm your entry.

The selected position is saved in the positioner memory by pressing the "Green key" given command accessible from all items of the DiSEqC 1.2 setup menu. SATELLITE NAME

The field for selecting the satellite corresponding to the set position. To deselect the satellite for the set position, use the "RED key". To change the parameters of the selected satellite, press the "BLUE key".

TRANSPONDER

The transponder selection field, the scale of the strength and signal quality of this transponder will be displayed at the bottom of the screen, and the Satellite Settings menu will open.

GO TO
When this button is pressed, the satellite dish is moved to the selected position.
SEARCH SATELLITE SIGNAL

This function is used to search for a satellite signal. After selecting the direction (East or West), the antenna will automatically move in the selected direction. The level of the received signal is controlled by the strength and quality scales at the bottom of the screen. Press the RED button to stop the movement of the antenna. For fine tuning antenna position, use the commands "Step West" - "YELLOW button" and "Step East" - "BLUE button".

CHANNEL SEARCH
Search for TV channels and radio stations by the selected transponder.
ADDITIONALLY
Opens the advanced positioner settings menu. The antenna can be moved to starting position by selecting the item "Go to position 0". To set the east (west) limit of movement of the antenna, you must set the antenna to the extreme east (west) position, then select "Set East Boundary" ("Set West Boundary"). To disable the limits, select the "Cancel borders" item. The purpose of the "Recalculate" command is individual for each positioner.

USALS SETUP
In order to set up a satellite dish, you must:
1. Set the latitude and longitude of the location of the motorized system, to do this:
Go to the item "My latitude" or "My longitude" and press the "OK" button.
Enter the values ​​using the "NUMERIC keys 0-9" in the format xxx.x.
Press "OK" to save the entered values, or the "EXIT" key to discard the changes;
2. Specify the satellite to which the motorized system is to be tuned. The Orbital Position section displays the position corresponding to the original satellite.
3. Indicate "Transponder". Signal strength and quality bars for this transponder will be displayed at the bottom of the screen.
4. Specify the line "Go" and click "OK". The satellite dish will begin to position itself to the dedicated satellite.
5. Select the "Channel search" item to scan the channels from the selected transponder of the entered satellite.
It is possible to pause the movement of the USALS positioner by pressing the "RED key". It is possible to move the positioner to the zero position by pressing the "YELLOW key".
The settings are saved when you exit the USALS Setup menu. SETTING UP SATELLITES

The "Satellite settings" menu item is available in the "Settings" section by pressing the "OK" key or in the "Automatic search" and "Manual search" menus by pressing the "BLUE key" on the selected satellite. The "Satellite settings" menu allows you to specify the required satellite from the list, set a new one, delete, change both the name of the satellite and information about its orbital position. In addition, in this menu, you can change the transponder settings or specify new transponders. SATELLITE NAME

The names of the satellites are listed in alphabetical order. First, the list contains names in the Latin alphabet, then in other languages. If the required satellite is not in the list, press the yellow key. The "New" satellite will be added to the list of satellites. To change its name, press the blue key. Use the on-screen keyboard to add the name you want. In a similar way you can change the name of each satellite.

ORBITAL POSITION

In order to enter the required orbital position, press the blue key, type with " NUMERIC keys 0-9 "the required position of the satellite in the xxx.x format, select the direction" W "(west longitude) or" E "(east longitude) and press the" OK "key.

TRANSPONDER

This item contains a list of transponders for the specified satellite. The following settings correspond to any transponder: “Frequency”, “Polarization”, “Flow rate”, “FEC”.

FREQUENCY

Enter the transponder frequency in xxxxx format. The frequency should be within 3400-4200 MHz or 10700-12750 MHz. To set the frequency to 10719 MHz, dial 10719, to enter the frequency 3675 MHz, dial 03675.

POLARIZATION
Specify the type of polarization: "Vertical", "Horizontal", "Left", "Right". FLOW RATE

Use the "NUMERIC buttons 0-9" to specify the required flow rate in the xxxxx format. To set the flow rate, for example 2500, dial 02500. To set the orbital position 125.6, dial 1256. To enter the orbital position 19.2, dial 0192

FEC
In this menu item, specify 1 value from the list possible values error correction parameter: 1/2, 2/3, 3/4, 5 / 6,7 / 8.

Screen settings in the GS HD 9305 receiver

In the "Screen settings" the user is supposed to configure the following options: "Menu transparency", "Info banner type", "Display time", "On mode".
TRANSPARENCY OF THE MENU
This menu item specifies the degree of transparency of the image of an informative banner, a window for the list of TV and radio channels, a time indicator, etc. The value of the parameter changes in the range from 0 to 70% with a step of 10%.
INFOBANNER TYPE
Beginner mode turns off the ability to view satellite data, settings and programmed channel identifiers in the extended information banner. The "Expert" mode opens the possibility of viewing information about the satellite, settings and programmed channel identifiers in an extended information banner.
DISPLAY TIME
This section specifies the display time of the information banner. The duration time can be changed using the numeric keys in the range from 0 to 30 seconds. If you select 0, the information banner will not appear when switching between TV and radio channels.
ON MODE
"Standby mode": after turning on the tricolor TV receiver to the network and turning the receiver power switch to the "I" position, the receiver remains in standby mode. To turn on the receiver, switch it to operating mode by pressing the "STANDBY" key. "Working mode": after connecting to the network and moving the power switch of the hd receiver to the "I" position, the receiver enters the working state.

TIME SETTING
In this setting, the time and date settings must be entered.
TIMEZONE
In the "UTC Offset" section, you can set the difference between your time zone and UTC (time on the Greenwich meridian).
UPDATE FROM SATELLITE
Additional choices: "Yes", "No". If you select “Yes” to set the system time and date, the receiver will use the data transmitted by the broadcaster as part of the satellite signal. If you select No, the receiver will use the date and time that you manually entered during this step of the installation.
YEAR, MONTH, DAY
In this section Use the NUMERIC keys 0-9 to enter the time and date settings.
THE LOCAL TIME
This section displays the current system time according to your preferences.
BLOCKING

Setting the age limit and PIN-code to restrict access to the selected channels. This option determines the restriction on viewing and prevents unauthorized access to some sections of the menu of your receiver using a PIN-code consisting of 4 digits and different from the default PIN-code (0000). When the PIN code is entered incorrectly, you will not be able to switch to the next mode.

AGE LIMIT

In this menu, you can set the age limit for viewing various programs... The age limit is set using the drop-down list, which is called by clicking the "OK" button. This function works if the satellite TV operator broadcasts information about age limit to view his programs.

To access more of the receiver's functions, you need to know the PIN-code (the TV screen will ask you to enter the code). To change the PIN, go to the “Change PIN” menu item, in which you must enter the current PIN-code, and set the new required PIN-code near the “New PIN” indicator. To confirm the entry, you need to re-enter the new PIN-code. If you forget the PIN-code, you need to contact the service center where you bought the HD receiver, as a result, try to remember the PIN code. FACTORY SETTINGS

All settings can be restored to their default values ​​in this menu item. When resetting to factory settings, all information about tuned TV channels and radio stations, antennas, favorite lists will be lost. To load the factory settings, select "Yes" and press the "OK" key.

Conditional access (Tricolor TV smart card, Tricolor TV HD module)

The 9305-HD receiver has a built-in DRE access Crypt and makes it possible to access programs broadcast using the system conditional access DRE Crypt.

When switching to DRE-encoded TV and radio channels, a decoding delay of a few seconds is possible and an informative message Encrypted channel (DRE) will appear at this time. SMART CARD TRICOLOR
In this menu item, you can see information about the smart card: serial number, as well as the version of the software and hardware.
MODULE TRICOLOR TV
In the original menu item, you can find information about the DRE Crypt conditional access module.
GENERAL INFORMATION
At this point, you can get the combined information about the version of the software and hardware built-in access module Tricolor TV.
DRE INFO
At the starting point, you can get general information about the software version of the conditional access system.

The "Status" window is called in the "Main Menu" by selecting the "Status" section. In addition, the window of the "Status" menu item can be called up by pressing the "STATUS" key in the mode of viewing TV and radio channels. The item "Status" stores the following information: satellite receiver model, DRE ID, receiver software version, module software version, serial number hd receiver. For more information (receiver hardware version, module version, database version, platform ID, bootloader build date) press the green key. To close the window with additional information, press the green key again.

SUBSCRIPTIONS

For information about subscriptions, press the red key. In the window that opens, you can get general information about the geocode of the subscriptions on the map, mail subscriptions and the time of their action. To exit the "Subscriptions" window, press the red key again.

All information from this menu is required when contacting the manufacturer's technical support service.
Materials on the GS 9305 receiver:

Subscribe to news

V Lately more and more users of satellite television Tricolor TV complain about various advertising banners arising when switching channels. For some subscribers, they absolutely do not interfere, since they are displayed for no more than 2 seconds, and they annoy others. It is precisely the second category that is interested in how to disable advertising on Tricolor TV.

Is it possible to remove ads

Many satellite TV users do not even know that advertising can be removed without any problems. It will take a few minutes of personal time and perseverance. You can remove ads on Tricolor TV using the following methods:

• disable the display of banners in the equipment settings;
• changing the display time in the STB settings;
• flashing the receiver.

All the presented methods are effective, we will consider them in more detail.

Contacting support

Most reliable way how to disable advertising on Tricolor TV - this is to contact the support service. To do this, you need to use the number hotline... It will be necessary to provide the equipment identifier, personal data and describe the essence of the problem. Usually, after calling the support service, the advertisement disappears completely after two days.

1. Select the category "Disable SMS-mailing, information messages, banners ".
2. We fill in the form completely.
3. Be sure to indicate that inter-channel advertising is urgently disabled, as it interferes with watching television.
4. We send the application.

The application will be reviewed shortly, after which the banners will disappear forever.

Re-flashing the receiver

A radical method that can lead to a completely different result. Any mistake can damage the equipment. If you are so tired of advertising on Tricolor TV when you switch that you decided to reflash, we recommend using the software version providing Dre v 3.5.11. It should be noted that it was created on the basis of official version 3.4.369. In general, the flashing should be done by specialists who are familiar with the process. Any mistake and problem with annoying banners may not seem so disastrous anymore.

Changing the time in the hardware settings

You can solve the problem more in a simple way... You will need to reconfigure the display time. This procedure is performed in the receiver settings. We go into the menu and go to:

• system settings;
• other settings;
• display time.

In the "Display time" section, you will need to set the value to zero. However, this method is temporary, in a few months the banners will appear again.

A number of important points

1. The internet is full of scammers who are minimum amount ready to remove ads. Everything is done officially, free of charge, do not send any personal information to dubious persons.
2. If you can't eliminate banners available methods, contact service center.
3. Do not try to install the firmware if you are not confident in your abilities.

In conclusion

Removing annoying ads is easy. The tricolor does not interfere with this in any way, does not charge a shutdown fee. The user is only required to use convenient option from those presented in the article. Then enjoy watching your favorite shows.