Hello, I ran into a situation - when connecting LogMeIn Hamachi, which is installed on Windows 7, to the network, computers on the network are not available, and a yellow triangle with an exclamation mark is drawn against them. I want to show you how to fix this error.
If you go into the node connection details, then an error will be written against the VPN status parameter.
If you go to the settings, in the VPN domain in the status information, an error is written - Could not connect to the network adapter. Peer is not reachable via VPN.
In my case, the problem was with installing the Hamachi network driver. If you go to the device manager (computer properties - device manager), there you can see an exclamation mark in a yellow triangle for the Hamachi Network Interface driver. If you go to the properties of this driver, it will be written that the driver does not have a digital signature.
Because of this, there is no Hamachi network interface in the system, and Hamachi cannot connect to computers on the network.
To fix this, you can go the hard and simple way.
Difficult - put the system into test mode and disable the mandatory verification of the digital signature of drivers in group policies. But I didn't, and I don't recommend it.
Simple - download Hamachi version 2.2.0.328 - Hamachi 2.2.0.328
After Hamachi 2.2.0.328 is downloaded, you need to remove the version that you have installed. And just put the version that was downloaded. In this version, everything is fine with the digital signature of the driver, and after installing it, everything worked for me.
After starting the program, you can update it from the program itself (help - check for updates), or you can download the latest version from the developers website. When you run the installer, the program will be updated. And there should be no problems with the driver and connection to computers.
By the way, I installed the latest version of the program on Windows 10, it worked fine for me, but if you suddenly have the same problem that I wrote about above, then you can try installing version 2.2.0.328.
With it, I had a situation that the driver in the device manager is working fine, there are no exclamation marks, and there is no network interface in the network and sharing center. A simple reinstallation of LogMeIn Hamachi helped, that is, this version needs to be installed 2 times. After that everything works fine.
Online games have firmly won the leading places among the most popular entertainment. But playing alone is not always comfortable. In order for players to unite in teams, the Hamachi program was created, which allows you to create local networks on the Internet. This utility in most cases does its job perfectly, but it also sometimes fails. The most common Hamachi error is a tunnel issue. How to fix this error is described in this article.
The appearance of an error
Usually a connection bug occurs at the very height of the game. A message appears on the screen: Peer angle connection problem. Simultaneously with the message, the same problem is indicated by an exclamation mark in the yellow triangle that appears in the control window.
Call to provider
The first thing that always comes to mind when the connection is broken is the instability of the Internet connection. This problem is solved by contacting the technical service of the provider. If the break happened due to poor-quality communication, then the best solution is a different tariff or another provider.
System operation
Sometimes beginners get frustrated because the installed program does not start. Yes, automatic activation is not provided here - hamachi must be turned on manually. To do this, go to network connections and check the status.
Often the problem is solved by simply connecting the adapter.
Wrong settings
If there are no other complaints about the Internet connection, the reasons for the break should be looked for further. Incorrect settings are another reason for disconnection. For a correct connection, you must reconfigure the connection parameters. They allow you to disable digital signature verification and completely disable network policy verification. The second option is to install an outdated version of the program, and only then gradually update it to the current one. If you decide to go the second way, download Hamachi version 220328, having removed the current version of the program before that. After installation, the program works quite correctly.
And there are no triangles near the nicknames of the players.
The reconfiguration option is a little more complicated. But if all else fails, let's try to perform a series of simple steps.
We launch the program and go to the "Options" menu, look for the "additional options" option there. After that, we reconfigure the connection:
- disable encryption;
- set the value near the “compression” item - any;
- next to the traffic filtering option, set "Allow all";
- in the section “connecting to the server, disable the ability to use a proxy;
- turn on the presence in the network.
Sometimes you need to do one more thing: change the IP protocol mode. This should be done through the properties menu.
Often, an error called “VPN status” in Hamachi occurs due to a broken or unavailable network connection. After reviewing the details of the error, you will be able to understand the reasons. Typically, this translates into the unavailability of the peer through the VPN. Don't call a node disposable like most users do. A yellow triangle will light up next to each connection.
In order to get rid of this error, follow the step-by-step instructions.
Stage 1
Check the availability of the system, and then open any site that you visit in the browser using the Google or Yandex search engine. If everything works fine, we move on to the next step.
Stage 2
Open network connections. It is enough to start writing the word "networks" in Windows 10, and then open "View Network Connections".
Find the Hamachi adapter in the list and enable it if it is in a disabled state. If it is not found, fixing the VPN status in Hamachi is resolved by installing. You should also read about this in the instructions.
Stage 3
Disable all Firewall and antiviruses without exception.
Stage 4
After that, you will need to find the "Logmein Hamachi Tunneling Engine" in the services and reboot. Further, in the VPN configuration in Hamachi, this error should disappear.
This problem occurs quite often and promises unpleasant consequences - it is impossible to connect to other network members. There can be quite a few reasons: incorrect network, client or security software settings. Let's analyze everything in order.
So, what to do when there is a problem with the tunnel in Hamachi?
More often than not, more careful configuration of the Hamachi network adapter settings helps.
1 . Go to the "Network and Sharing Center" (by right-clicking on the connection in the lower right corner of the screen or by finding this item through the search in the Start menu).
2
. Click "Change adapter settings" on the left.
3
. Right-click on the Hamachi connection and select Properties.
4
.Select the item "IP version 4 (TCP / IPv4)" and click "Properties - Advanced ...".
5
. Now in the "Basic gateways" we delete the existing gateway, and set the interface metric to 10 (instead of 9000 by default). Click OK to save changes and close all properties.
These 5 simple steps should help you fix your Hamachi tunnel issue. The remaining yellow triangles for some people only indicate that they still have the problem, and not you. If the problem persists for all connections, then you will have to try a number of additional manipulations.
Setting Hamachi Options
1 . In the program, click "System - Settings ...".
2
. On the Options tab, click on Advanced Settings.
3
. We are looking for the subheading "Connections to peers" and select "Encryption - any", "Compression - any". Also, make sure "Enable mDNS Name Resolution" is set to "yes" and "Traffic Filtering" is set to "allow all".
Some, on the contrary, advise completely disabling encryption and compression, look here and try it yourself. "Summary" will give you a hint, more on that towards the end of the article.
4 . In the "Connect to the server" section, set "Use a proxy server - no."
5
. In the "Presence on the network" section, you also need to enable "yes".
6
. We leave and reconnect to the network by double-clicking the stylized "power button".
Other Sources of the Problem
To find out more specifically what is the reason for the yellow triangle, you can right-click on the problematic connection and click "Details ...".
On the Summary tab, you will find comprehensive data on connection, encryption, compression, and so on. If the reason is in one thing, then the problem item will be indicated by a yellow triangle and red text.
For example, if there is an error in "VPN status", then you should make sure that you have an Internet connection and that the Hamachi connection is active (see "Changing adapter settings"). In extreme cases, restarting the program or rebooting the system will help. The rest of the problematic points are solved in the program settings, as described in detail above.
Another source of illness can be your antivirus with a firewall or firewall, you need to add the program to the exceptions. Read more about blocking Hamachi network capabilities and fixing it in.
So, you have familiarized yourself with all the known methods for combating the yellow triangle! Now, if you have fixed the bug, share the article with your friends so that you can play together without problems.
Hello, I ran into a situation - when connecting LogMeIn Hamachi, which is installed on Windows 7, to the network, computers on the network are not available, and a yellow triangle with an exclamation mark is drawn against them. I want to show you how to fix this error.
If you go into the node connection details, then an error will be written against the VPN status parameter.
If you go to the settings, in the VPN domain in the status information, an error is written - Could not connect to the network adapter. Peer is not reachable via VPN.
In my case, the problem was with installing the Hamachi network driver. If you go to the device manager (computer properties - device manager), there you can see an exclamation mark in a yellow triangle for the Hamachi Network Interface driver. If you go to the properties of this driver, it will be written that the driver does not have a digital signature.
Because of this, there is no Hamachi network interface in the system, and Hamachi cannot connect to computers on the network.
To fix this, you can go the hard and simple way.
Difficult - put the system into test mode and disable the mandatory verification of the digital signature of drivers in group policies. But I didn't, and I don't recommend it.
Simple - download Hamachi version 2.2.0.328 - Hamachi 2.2.0.328
After Hamachi 2.2.0.328 is downloaded, you need to remove the version that you have installed. And just put the version that was downloaded. In this version, everything is fine with the digital signature of the driver, and after installing it, everything worked for me.
After starting the program, you can update it from the program itself (help - check for updates), or you can download the latest version from the developers website. When you run the installer, the program will be updated. And there should be no problems with the driver and connection to computers.
By the way, I installed the latest version of the program on Windows 10, it worked fine for me, but if you suddenly have the same problem that I wrote about above, then you can try installing version 2.2.0.328.
With it, I had a situation that the driver in the device manager is working fine, there are no exclamation marks, and there is no network interface in the network and sharing center. A simple reinstallation of LogMeIn Hamachi helped, that is, this version needs to be installed 2 times. After that everything works fine.
