Company NKTV provides the ability to view not only analog, but also digital channels, if your TV has a tuner standard DVB-C- then you can customize and watch them for free. In this article, we will look at ways to set up digital cable channels NKTV on different models TVs.
I want to remind you that I have nothing to do with NKTV, the information is for informational purposes only to help the operator cable TV... NKTV company phones: 1569 or 47-09-42 , that's where you can contact with all questions
The list of digital cable channels (open and paid) you can take on our file sharing in the section: channel lists
Main settings to receive digital package channels " Open"on your TV:
- Symbol rate: 7000
- QAM: 64
- Frequencies on which open channels are broadcast (MHz): 210, 362, 370, 378, 386, 394, 402, 410, 418, 434, 442, 450, 458, 786, 794, 810, 818
Parameters for receiving a digital package of channels " HD"on your TV:
- Symbol rate: 7000
- QAM: 256 (from 07-10-2013 this parameter changed from 64 to 256)
- Frequencies at which open HD channels are broadcast (MHz): 802
- Go to the menu and select the Channel section (picture is a satellite dish).
- Select the item Country.
- For analog and digital channels indicate "Other".
- We return to the previous section and select the item "Cable search parameters".
- Configure the parameters "Start frequency" - 362000, "End frequency" - 818000, "Modulation" - QAM64 and "Baud rate" - 7000.
- We return to the previous section and select the "Auto-tuning" item.
- Select the signal source - "Cable".
- In the autotuning window that opens, select Digital (if you do not want to wait long enough for the settings analog TV channels).
- Use the up and down buttons to select the "Full" search mode and press ENTER. Next, the search for channels will begin and will be completed in about 15-30 minutes.
- Press the Menu button on the remote control, select the "OPTIONS" tab.
- Next, we select the country Finland, Germany, on new TVs, you can also select Russia.
- Next, select the "SETTINGS" tab.
- Choose "AUTO SEARCH". In it we select "CABLE".
- Then we manually set the frequency - (one of the above), Speed - 7000, Modulation - QAM-64.
- Next, close this window and click "OK".
- Next, click on EXECUTE.
- The TV set itself all channels, first in digital, and then in analog.
- Press the "House" button on the remote control and get into the menu.
- Select the "Configuration" menu.
- "Installations".
- "Channel settings".
- « Automatic installation».
- "To begin".
- "Reinstallation of channels".
- "Finland" "Norway". The selection of the country is needed to activate the cable TV menu, since the parameters for the cable in Ukraine and Russia are not officially standardized.
- "Cable". If there is no such menu item, then either you have selected a country without digital cable, or your TV does not contain DVB-C receiver.
- "Installations". Don't run search! First "Settings"!
- Baud rate mode - "Manual".
- Transfer rate -7000
- Scanning frequency. " Fast scan". You can leave the "Full scan, while two next steps need to be skipped. But keep in mind that a full scan will take about half an hour!
- Network frequency mode - "Manual".
- Mains frequency - (one of the above)
- Analogue channels- "On". Otherwise, only digital channels will be found.
- "Ready" .
- Run the search "Start".
- We are waiting for the search to complete.
- At the end of the search, click "Finish".
- Now you can exit the menu with the "BACK" or "TV" button and start watching channels.
- Press the "MENU" button, select the "SETTINGS" item.
- In the window that opens, select the item "DIGITAL CONFIGURATION". Having selected this item, we press the "OK" button.
- In the window that appears, select the item "DIGITAL SETTING".
- Next, select the item "AUTO SEARCH DIGITAL STATIONS".
- Further to the question - "DO YOU WANT TO START AUTOMATIC STATION SEARCH?" press the "OK" button.
- In the window that opens, select "CABLE".
- In the window that opens, select "FAST SCAN".
- Next, select the "MANUAL" item.
- Next, enter the frequency - (one of the above)
- Leave the network access code "AUTO". Next, enter the SYMBOL SPEED 7000
- If there is an input field, change the QAM to 64 and the search type "Network"
- After everything passed, we press "START".
For subscribers living at st. Aviators, the Pavshinskaya Poyma region and the "English Quarter" residential complex, instructions for setting up are located.
Instructions for setting up TVs with digital tuner DVB-C for working with digital channels GlobalTelecomStroy.
Attention! Your TV menu may differ from the suggested model. In this case, you need to find tabs that are similar in meaning and enter the specified parameters.
1. General data
2. Equipment SAMSUNG brands
3. PHILIPS brand equipment
4. Equipment of the SONY brand
5. Equipment of the PANASONIC brand
6. Toshiba brand equipment
7. LG brand equipment
8. Equipment brand SHARP
1. General data.
The basic parameters for receiving a digital cable TV signal from your television set are as follows:
Built-in digital tuner DVB-C standard supporting reception
digital cable television programs.
The presence of a PCMCI connector for placing a CAM module (in CAM module is established
card for viewing encoded channels).
To configure the built-in DVB-C tuner to receive digital cable television programs, you must use the following parameters (selected in the TV menu):
Initial broadcasting frequency 106 MHz (106000 KHz);
End broadcast frequency 138 MHz (138000 KHz)
Symbol rate 6 875 sim / s (6 875 KS / s);
QAM modulation 128;
Frequencies for manual setting in Megahertz: 106, 122, 130,138
Advantages digital television:
The use of digital television provides a number of advantages over
analog television:
High noise immunity;
Significant increase in the number of TV programs;
High quality picture and sound of TV receivers;
Additional audio tracks, multi-channel audio tracks;
Creation of TV systems with new standards of image decomposition (high definition television - HD);
Transmission of various additional information in a TV signal;
Archive of TV programs and Recording of TV programs;
Language and subtitle selection.
Digital television (from the English Digital Television, DTV) - the transmission of video and audio signals from the translator to the TV, using digital modulation and compression for data transmission. The basis of modern digital television is the MPEG compression standard.
2. Equipment brand SAMSUNG.
Instructions for decoding Samsung TV models:
Suppose your TV model is LE-40B530, this means that the first letter (can be L, P or U) is LCD, Plasma or LED, respectively.
Next letter E (could be E, N, A) - Europe, North America or Asia
5 - series.
30 - sub-series.
DVB-C receiver is built into all models from 2009 release! (letter index B, C or D). Before tuning, you need to set the following parameters in the menu: Country - Slovakia or Slovenia, Auto search for digital and analogue channels, Source - Cable, Network.
General algorithms for tuning digital channels for different models LCD TVs
SAMSUNG brands:
1. Click to enter the menu - (green button);
2. select in the menu - "Channel" (icon " Satellite antenna");
3. choose - "Auto-tuning";
4. select the signal source - "Cable";
5. choose - "Digital";
6. Click - "Start".
Tuning digital channels on TVs brand Samsung 2010 onwards:
1. To customize digital TV channels the overwhelming number Samsung models, press the "Menu" button on the remote control, you will see the TV menu, in which you will need to select the "Channel" section (Satellite dish icon). The TV will ask for a pin-code, if you have not changed it, then enter 0000. To have required parameters search for DTV, make sure that in the menu "Channel - Country" the following settings(if there is no Roosia, then select "Others")
Make sure Cable is selected in the Channel - Antenna menu.
2.1Open the menu "Channel - Cable search parameters"
Start frequency: 106000 Khz;
End frequency: 138000 Khz;
Transfer rate: 6875 KS / s;
Modulation: 128 QAM;
2.2 Open the menu "Channel - Auto tuning"
Signal source: "Cable";
Channel type: "Digital";
Choose the type of channels at your discretion, you can find only digital channels, or "Digital + analog". Click Next.
2.3 Set the search mode: "Network".
2.4 Click the "Search" button. After the channel search is over, click "OK".
After automatic search all digital channels on the cable network will be found. But only those that are included in the packages of digital TV channels you have chosen will be shown. It is most convenient to delete the rest of the channels.
If the search in "Automatic" mode did not bring any results - repeat with similar settings in manual mode.
Sorting channels
2.5 Open the menu "Channels - Channel Manager". Please select desired channel(or several, using the "C" (yellow) button on the remote control), press the "TOOLS" button on the remote control and select "Delete". After confirmation, the selected channel will be deleted.
To sort the channels, select the one you need (in the “Channel - Channel Manager” menu), press the “C” button, then the “TOOLS” button, the “Sort” menu and move it to the desired place in order.
With SMART TV:
Look on the remote control button " smart hub", Click and select the channel icon, then we see
the list of channels, in the upper right corner, select editing.
3. Equipment brand PHILIPS.
First, we read the stickers on the back of the TV, where separately for each tuner (DVB-T and DVB-C) there is a list of countries in which, according to Philips, there are digital broadcasting(at the time of TV release, but if you update the firmware through their official website, then this list may change in subsequent firmwares). If our country is not there, then we will have to put some other from this list.
1. Click on the icon - "House";
2. select - "Configuration";
3. select - "Installation";
6. choose - "Digital mode";
7. choose - "Cable";
8. choose - "Automatic";
9. press - "Start".
The setup takes about 5-10 minutes.
Models Philips TVs 2011 year
1. Click on the icon - "House";
2. select - "Installation";
3. select "Search for channels";
4. select - "Reinstall channels";
5. choose - "the country that is indicated on the sticker on the back panel" (usually France, Finland or Germany);
6.select digital mode- "Cable (DVB-C)";
7. in the line "Network frequency" we drive in the frequency;
8. in the line "Transfer rate" we drive in the speed;
The setup takes about 5-10 minutes.
Setting up digital channels for Philips TVs.
Series: ** PFL **** H (in the search menu: Country - include Sweden).
Setting up digital channels on Philips TVs:
1. In order to tune in high-definition digital TV channels, the vast majority Philips models, press the "Menu" button on the remote control, you will see the TV menu, in which you will need to select the "Configuration" section
2. Select the "Installation" tab. After pressing the "OK" button, you will move to the second field of the menu, then go to the "Channel setup" tab. After pressing the "OK" button, you will see the third part of the menu, where you need to select "Automatic. Installations ". Then you will see a message about updating the channel list, click "Start".
3. Select "Reinstall Channels"
4. In the "Country" section, select Russia, if not, then Finland, but if this country is not in the proposed list, then select Germany.
5. Since you are connecting to digital TV via cable network DVB-C, you must select "Cable".
6. Before starting the channel search, select “Preferences” to manually correct the search parameters.
7. Set the baud rate to manual. In the tab, manually change the baud rate from the control panel to the desired one. In some TV models, the stream rate is indicated in the "Symbol 1" tab, "Symbol 2" we leave 0.
8. Now set the manual mode of the mains frequency and from the remote control enter the mains frequency Frequency 114.00. The data transfer rate is 6875 ks / s. QAM128. Analog channels - "On". Otherwise, only digital channels will be found.
9. After clicking the "done" tab, you will again be taken to the channel launch menu, now you can start scanning.
10. If you did everything correctly and saved all the changed parameters, then during the search you will find all digital channels.
4. Equipment of the SONY brand.
Since not all SONY models are equipped with digital tuner for cable TV (DVB-C) you need to check your SONY TV model.
Models equipped with a DVB-C tuner are marked KDL - ** EX *** or KDL-
** NX *** - for example KDL-32EX402R2 the first 3 letters in the model name (KDL) just indicate that the TV is "digital". In KLV models - ** BX *** etc. tuners DVB no.
1. Press the "MENU" button (for some models it is called "HOME" on the remote remote control(hereinafter referred to as the remote control). This button is usually of blue color.
2. Select the item "Settings"
3. Find the "Digital Configuration" menu in the list of settings, enter it.
4. Select "Autosearch digital stations".
5. The source selection window will open - select the type of TV connection. Select "cable".
6. In the item for selecting the type of scan - select the "full scan" mode.
7. Or select the "Manual" item.
10. Click "start". Wait for the TV to finish searching for channels.
pay attention to lower part OSD menu Your TV. At the bottom
the menu bar displays hints with which buttons on the remote control to perform certain actions in the TV menu.
Setting up digital channels on TVs of the SONY trademark:
1. Press the "MENU" button, select the "SETTINGS" item.
2. In the window that opens, select the item "DIGITAL CONFIGURATION". Having selected this item, press the "OK" button.
3. In the window that appears, select the item "DIGITAL SETTING".
6. In the window that opens, select "CABLE".
7. In the window that opens, select "FAST SCAN".
10. Leave the network access code "AUTO". Next, enter the SYMBOL SPEED 6.875. After everything passed, we press "START".
The TV will then find the entire digital TV package.
5. Equipment of the PANASONIC brand.
Setting up digital channels on TVs of the PANASONIC trademark:
Option 1.
1. Press the button - "Menu";
2. Select the item "Settings";
3. In the window that appears, select “Analogue Menu. settings";
4. In the window that appears, select the item "Add TV signal";
5. In the table that opens, put a check mark on the line "DVB-C" and, going down, click "Start autotuning";
6. After searching for all digital channels, going to the main menu in the "Settings" item, the line "DVB-C setup menu" appears. By selecting this item, you can correct the setting in manual mode(set frequency and speed). Your TV menu may differ from the suggested model. In this case, you need to find tabs that are similar in meaning. If your TV asks for a seek step, specify 8MHz.
They turned on the TV. Click on the "menu" button on the remote control, go to the main TV setup menu, in which there is a Settings section, by going to which in the right menu we see the DVB-C setup menu subsection:
In the "Auto-tuning" menu we see where it is necessary to enter the indications indicated (by the provider), note that there is no "Modulation" parameter. Search mode - "All channels" (then sort it). Scan Mode - Fast (or Full). Network ID -Which was indicated on the package (or car).
We enter the parameters, click on "Start scanning automatically, wait from 3 (fast) to 10 minutes (full scan), after which the TV automatically displays a list of all channels configured by this tuner.
The channel list will be displayed automatically, or it can be found in the DVB-C setup menu
Sorting channels:
If you uncheck the checkbox on the left, then when sequentially switching channels, the tuner will simply "jump" this channel. To customize the channel list for yourself, I recommend creating a "favorites" list by arranging the channels according to the necessary buttons (first-1, Russia-2, TVC-3, etc.). In order for the TV (and the tuner) to work according to the "Favorites" list, you need to press the "i" button on the remote control on any channel and immediately the "blue" buttons, a small menu will open on the bottom right of the screen in which you need to select "Favorites".
6. Equipment brand Toshiba.
Setting up digital channels on Toshiba TVs:
1. Turn on your TV. Go to the menu. Select the language Russian. Country Russia, or in the absence - Germany.
In the menu item "Ant / cable input" select the item "Cable"
2. Go to the "DTV manual tuning" tab and click "OK"
3. Enter the frequency, modulation, symbol rate or set the parameters in the Auto tuning menu:
Scan type - quick scan;
Starting frequency - 114.000 MHz;
End frequency - 138.00 MHz;
Modulation - 128 QAM;
Symbol rate - 6875 KS / s.
4. After pressing the "OK" button, the search will start, as a result of which the channels should be found.
Attention! Your TV menu may differ from the suggested model. In that
in case you need to find tabs that are similar in meaning and enter the specified parameters.
7. Equipment brand LG.
1. Press the button - "Menu"
2. select in the menu - "Options"
3. select - "Auto-tuning"
4. select the country - "France, Switzerland, Sweden or Finland"
5. select the signal source - "Cable"
6. choose - "Digital"
7. click - "Search
The setup takes about 5-10 minutes.
Setting up digital channels on TVs of the LG brand.
1. In order to tune high-definition digital TV channels for the overwhelming number of LG models, press the "Menu" button on the remote control, you will see the TV menu, in which you will need to select the "Options" section
2. Specify the country "Russia, France, Switzerland, Sweden or Finland"
3. Now go to the "Settings" menu, the "Auto search" item and specify the method of connecting to the TV "Cable".
4. Now in the window that opens, go to "Settings" and enter the following parameters: Search type: fast, Frequency (kHz) - 106000, Speed. Characters - 6875, Modulation - 128QAM, Network ID: auto
5. If you did everything correctly and saved all the changed parameters, then during the search you will find channels and radio stations.
6. An important feature LG TVs feature “ Automatic update channels ". It must be turned off, otherwise the TV will periodically reset the channel list you have configured.
Go to "settings digital cable»: Channel auto-update: off
Sorting channels Setting -> Auto search -> cable -> Uncheck (√) with Auto numbering -> Run.
After all channels have been configured, the Program Editor will show desired buttons... The country selected is Sweden or Finland.
8. Equipment of the SHARP brand.
Setting up digital channels on TVs of the SHARP trademark.
Models: 46 (52, 65) XS1, LE700
If your TV model provides for the reception of digital channels, but there is no "DTV MENU" item, then we first select another country - France, Switzerland, Sweden or Finland.
1. Press the button - "DTV";
2. press - "DTV MENU";
3. choose - "Installation";
4. choose - "Autoinstallation";
5. Click - "OK".
The setup takes about 5-10 minutes.
Suggestions, remarks and additions to this manual should be sent to
To configure the built-in DVB-C tuner to receive digital cable television programs, you must use the following parameters (selected in the TV menu):
- Initial broadcasting frequency - 298 MHz (298000 kHz);
- A total of 16 transponders with a step of 8 MHz;
- Symbol rate - 6875 Ksim / sec;
- Modulation - 256 QAM.
These parameters are suitable for setting according to the principle network search, if the TV does not support it, then you need to use full search or select frequencies for manual tuning in megahertz: 298, 306, 314, 322, 330, 338, 346, 354, 362, 370, 378, 386, 394, 402, 410, 418.
Example for setting up Digital TV
1. SAMSUNG brand TVs
Explanation of SAMSUNG TV models:
- Country - Slovakia, Slovenia or Others;
- Autosearch for digital and analogue channels;
- Source - Cable;
- Search mode - Network.
General algorithms for tuning digital and analog channels for various models of SAMSUNG LCD TVs:
- Click on the entrance to the menu;
- Choose in the menu - "Channel" (the icon "Satellite dish");
- We choose - "Auto-tuning";
- We choose - "Digital", "Digital and Analogue" or "Analogue" (depending on the preferred television signal); Click - "Start".
A detailed description of setting up digital channels on SAMSUNG TVs starting from 2010:
- In order to tune digital TV channels for the vast majority of SAMSUNG models, press the Menu button on the remote control, you will see the TV menu, in which you will need to select the Channel section (Satellite antenna icon).
- Make sure Cable is selected in the Channel-Antenna menu
- To select a country, go to the "Channel-Country" menu item. The TV will ask for a pin-code, if you have not changed it, then enter 0000
- To have the required DTV search parameters, make sure that the following settings are selected in the Channel-Country menu: Country -> Digital Channel: Others; Analog channel: Eastern Europe
- Open the menu "Channel-Cable search parameters": Start frequency: 298 MHz (298000 kHz); End frequency: 418 MHz (418000 kHz); Transfer rate: 6875 KS / s; Modulation 256 QAM;
- Open the "Channel-Auto-tuning" menu: Signal source: "Cable"; Channel type: "Digital and analogue."; Choose the type of channels at your discretion, you can find only digital channels, either digital and analog, or only analog. Click "Next"; Search mode: "Network".
- Click "Next". After the channel search is over, click "OK". After an automatic search, you will find all existing digital channels on the cable network. Only those broadcasting in unencrypted form will be shown. It is most convenient to delete the rest of the channels.
Delete channels:
- Open the "Channels-Channel Manager" menu or press the "CH LIST" button on the remote control.
- Select the desired channel (or several, using the "C" (yellow) button on the remote control), press the "TOOLS" button on the remote control and select "Delete".
- After confirmation, the selected channel will be deleted.
Sorting channels:
- To sort the channels, select the one you need (in the “Channel-Channel Manager” menu, or press the “CH LIST” button on the remote control), press the “C” button, then the “TOOLS” button, the “Sort” menu and move it to the desired location. order place.
- If you have SMART TV: Look at the "smart hub" button on the remote control, press and select the channel icon, then we see the list of channels, in the upper right corner, select editing.
2. LG TVs
General algorithms for tuning digital and analog channels for various models of LG LCD TVs:
- Press the button - "Menu";
- Choose from the menu - "Options";
- We choose - "Auto-tuning";
- Choose a country - "France, Switzerland, Sweden or Finland";
- Select the signal source - "Cable";
- We choose - "Digital";
- Click - "Search".
The setup takes about 5-10 minutes.
A detailed description of how to set up digital channels on LG TVs:
- To tune in high definition digital TV channels for the vast majority of LG models, press the "Menu" button on the remote control, you will see the TV menu, in which you will need to select the "Options" section.
- Specify the country "Russia".
- Go to the "Settings" menu, item "Auto search" and specify the method of connection to the TV "Cable".
- In the window that opens, go to "Settings" and enter the following parameters: Search type: "Fast"; Frequency: 298000 (kHz); Speed characters: 6875; Modulation: 256 QAM; Network ID: auto.
- If you did everything correctly and saved all the changed parameters, then during the search you will find channels.
- An important feature of LG TVs is function "Automatic channel update". It must be disabled. otherwise the TV will periodically reset the channel list you have tuned. To do this, go to "Digital cable settings - Auto channel update": Off
Sorting channels:
To sort the channels, select "Settings" -> "Auto search" -> "Cable" -> Uncheck (√) from "Auto numbering" -> "Run". After setting up all the channels, the necessary buttons will appear in the "Program Editor".
3. SONY brand TVs
Since not all SONY models are equipped with a digital cable TV tuner (DVB-C), you need to check your SONY TV model. Models equipped with a DVB-C tuner are marked KDL - ** EX *** or KDL - ** NX *** - for example KDL-2EX402R2 the first 3 letters in the model name (KDL) just indicate that the TV is digital. " For KLV- ** BX *** etc. there are no DVB tuners.
General algorithms for tuning digital channels for various models of SONY LCD TVs:
- Press the "MENU" button (for some models it is called "HOME" on the remote control (hereinafter referred to as the RC). This button is usually blue;
- We select the item "Settings";
- Find the Digital Configuration menu in the list of settings, enter it;
- Select the item "Autosearch digital stations";
- The source selection window will open - select the type of TV connection. Select "Cable";
- In the item for selecting the type of scan - select the "Full scan" mode.
- Or by selecting the item "Manual" we enter: Frequency: 298 MHz (298000 kHz); Access code: "Auto"; Symbol rate: 6875.
- Then click "Start" and wait for the TV to finish searching for channels.
Take a look at the bottom of your TV's OSD. The bottom menu bar displays tips on which buttons on the remote control to perform certain actions in the TV menu.
4. Televisions brand PHILIPS
- Press the "House (home)" button on the remote control
- Select "Channel Search"
- Select "Reinstall Channels"
- Choosing the country "Germany"
- Choose "DVB-C Cable"
- In the list of operators, select "Others"
- Press right on the remote control, select "Settings"
- We set the frequency scan to "Full"
- Set the baud rate to "Manual"
- We set the baud rate to "6875"
- We turn on analog channels only if they are needed
- Click "Done", return to the previous menu
- We start the search
Alternative option
To set up a PHILIPS TV, first read the stickers on the back of the TV, where separately for each tuner (DVB-T and DVB-C) there is a list of countries in which, according to PHILIPS, there is digital broadcasting (at the time of TV release, but if you update the firmware via their official website, this list may change in subsequent firmwares). If the item Russia is not in the list, then select - Slovakia, Slovenia or Others.
General algorithms for tuning digital channels for various models of PHILIPS LCD TVs:
- Click on the icon - "House";
- We choose - "Installation";
- We select "Search for channels";
- We select - "Reinstall channels";
- We choose - Country - Russia or Others. If the item Russia is not in the list, then select - Slovakia, Slovenia or Others;
- Select the digital mode - "Cable (DVB-C)";
- In the line "Network frequency" we drive in the frequency - 298 MHz (298000 kHz);
- In the line "Transfer rate" we drive in the speed - 6875 Ks / s;
- In the line "Scanning frequencies" - 256 QAM.
The setup takes about 5-10 minutes.
A detailed description of setting up digital channels on TVs of the PHILIPS trademark:
- Press the "Menu" button on the remote control;
- In the TV menu that opens, select the "Configuration" section;
- Select the "Installation" tab;
- After pressing the "OK" button, you will move to the second field of the menu, then go to the "Channel setting" tab;
- After pressing the "OK" button, you will see the third part of the menu, where you need to select "Automatic. installations ";
- Next, you will see a message about updating the channel list. Click "Start";
- Select "Reinstall Channels";
- In the "Country" section, select Russia, but if this country is not in the proposed list, then select Slovakia, Slovenia or Others;
- Since you are connecting to digital TV via the DVB-C cable network, you must select "Cable";
- Before starting the search for channels, select "Settings" to manually correct the search parameters;
- Set the baud rate to manual. In the tab, manually change the baud rate from the control panel to the desired one. In some TV models, the stream rate is indicated in the "Symbol 1" tab, "Symbol 2" we leave 0;
- Now set the manual mode of the network frequency and from the remote control enter:
- Frequency: 298.00;
- Data transfer rate: 6875 ks / s;
- QAM: 256.
- After clicking the "done" tab, you will again be taken to the channel launch menu, now you can start scanning.
If you did everything correctly and saved all the changed parameters, then during the search you will find channels.
5. TVs of the PANASONIC brand
Setting up digital channels on TVs of the PANASONIC trademark:
Option 1
- Press the "Menu" button;
- We select the item "Settings";
- In the window that appears, select "Analogue menu. settings";
- In the window that appears, select the item "Add TV signal";
- In the table that opens, put a check mark on the line "DVB-C";
- Click "Start auto-tuning";
- After searching for all digital channels, going to the main menu in the "Settings" item, the line "DVB-C setup menu" appears. By selecting this item, you can correct the setting in manual mode (set the frequency to 298 MHz (298000 kHz) and the speed to 6875 Ks / s).
Your TV menu may differ from the suggested model. In this case, you need to find tabs that are similar in meaning. If your TV asks for a search step, specify 8 MHz.
Option 2
- Press the "Menu" button;
- We select the item "Settings";
- Go to the subsection " DVB-C settings»;
- We select the subsection "Auto-tuning";
- In the "Auto-tuning" menu, enter the values: Frequency: 298 MHz; Symbol rate: 6875 Ksim / s; Note that there is no "modulation" parameter. Search mode: "All channels"; Scanning mode: "Fast" (or "Full"); Network ID: "auto".
- Click on "Start Scanning Automatically".
Channel scan lasts from 3 ("Fast") to 10 minutes ("Full" scan), after which the TV automatically displays a list of all channels configured by this tuner. The channel list will be displayed automatically, or it can be found in the DVB-C setup menu.
6. TV brand SHARP
Setting up digital channels on SHARP TVs:
Models: 46 (52, 65) XS1, LE700. If your TV model provides for the reception of digital channels, but there is no DTV MENU item, then we first select another country - Slovakia, Slovenia or Others.
- Press the "DTV" button;
- Press "DTV MENU";
- Choose "Installation";
- We select "Autoinstallation";
- Click "OK".
The setup takes about 5-10 minutes.
7. Media players of the DUNE HD brand
DUNE HD TV-102W-C can also act as a set-top box for watching digital television (cable (DVB-C) and Internet TV ((IPTV).)
- Go to the main menu by pressing the "TOP MENU" button on the remote control;
- We select the item "Settings"
- We select the item "Applications"
- In the "Cable TV" or "DVB-C" section, enter the values: Network Scanning: Not; Initial frequency, kHz: 298000; End frequency, kHz: 418000; Spacing: 8 MHz; Modulation: QAM 256; Symbol rate, kS / s: 6875
- We confirm the scan by pressing the "OK" button
- To view channels, go to the main menu by pressing the "TOP MENU" button on the remote control
- Go to the "TV" section
- We select the item "Cable TV" or "DVB-C"
- To start watching TV, select any of the found channels
